• Title/Summary/Keyword: TN

Search Result 2,076, Processing Time 0.023 seconds

Electro-Optical Characteristics of a-TN-LCD on Photo-alignment Films (광고분자막을 이용한 a-TN-LCD의 전기광학특성)

  • 서대식;박지호;이보호
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 1997.04a
    • /
    • pp.120-122
    • /
    • 1997
  • In this paper, the viewing angle characteristics of amorphous (a) - twisted nematic (TN) - liquid crystal display (LCD) on poly(viny)cirmamate (PVC) alignment surfaces were investigated. It was found that the threshold voltage is increased with increasing the polymerization on PVC surfaces. We suggest that the threshold voltage is affected to the surface anchoring strength with increasing the polymerization of the alignment film. Also, we obtained that the viewing angle of a-TN-LCD is increased with increasing the polymerization on PVC surfaces. Finally, we considered that the viewing angle of a-TN-LCD on PVC surfaces is large compared to TN-LCD on rubbed polyimide (Pl) surface.

  • PDF

A Study on Electro-Optical Characteristics of the TN Cell Photoaligned on the Ν-(phenyl)maleimide Surface using the UVLPH Photodimerization Method (Ν-(phenyl)maleimide 표면에 UVLPH 광중합법을 이용한 광배향 TN 셀의 전기광학특성에 관한 연구)

  • 황정연;김준영;김태호;서대식;김영식
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.15 no.8
    • /
    • pp.731-735
    • /
    • 2002
  • Electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure on the poly[4- (fluorocinnamate) phenylmaleimide](PFCPMI) surfaces using a new photodimerization method were investigated. For a new UVLPH (UV linearly polarized during heating) photodimerization method, the photopolymer layers were exposed by linearly polarized UV dichroic polarizer without a specific UV filter during heating at $150^{\circ}C$. The Voltage-transmittance (V-T) curve without backflow bounce in the photoaligned TN-LCD with UV exposure on the PFCPMI surface for 10 min using the UVLPH photodimerization method was observed. For response time measurement, the transmittance characteristics of the photoaligned TN-LCD using the UVLPH photodimerization method on the photopolymer surface was better than that of the photoaligned TN-LCD using the UVLP photodimerization method under a room temperature.

Study of Electro-Optical Characteristics on Photoalignment TN Cell using a High Thermal Photopolymer (고내열성 광폴리머 표면을 이용한 광배향 TN 셀의 전기광학 특성의 연구)

  • Lee, Whee-Won;Hwang, Jeoung-Yeon;Nam, Ki-Hyung;Lee, Myun-Gil;Suh, Dong-Hack;Seo, Dae-Shik
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2004.05a
    • /
    • pp.210-213
    • /
    • 2004
  • We synthesized photoalignment material of high thermal resistance with hydroxyl aromatic polyimide, and studied the liquid crystal (LC) aligning capabilities on the photopolymer layers. Also, electro-optical (EO) performances for the twisted-nematic (TN)-liquid crystal display (LCD) photoaligned with linearly polarized UV exposure were investigated. A good LC alignment with UV exposure on the photopolymer surface can be obtained. However, the low pretilt angles were obtained below $1^{\circ}$. The Voltage-transmittance (V-T) curve without backflow bounce in the photoaligned TN cell with UV exposure was observed. The response time of photoaligned TN cell was measured about 24 ms. Finally, The photoaligned TN cell has few hysteresis, and shows the residual DC voltage that is less.

  • PDF

Fast Switching Properties of TN Cell With Graphene Quantum Dots (그라핀 양자점을 도핑한 TN 셀의 고속 스위칭 특성)

  • Kim, Dai-Hyun
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.27 no.2
    • /
    • pp.110-114
    • /
    • 2014
  • In this study, we report the doping effect of graphene quantum dots (QDs) in nematic liquid crystal (NLC) system on rubbed polyimide (PI) surface. The good LC alignment and high thermal stability in QD-LC cell system on rubbed PI surfaces can be measured. Also, the low threshold voltage of QD-TN cell was observed about 2.77 V. The fast response time of 13.2 ms for QD-TN cell can be achieved. Finally, the good voltage holding ratio of QD-TN cell on rubbed PI surface was measured.

Study on the residual DC characteristic of Twisted Nematic liquid Crystal Display on the Polyimide Surface by the Thermal Stress (폴리이미드 표면에서의 열적 스트레스에 의한 TN셀의 잔류 DC 특성 연구)

  • Bae, Yu-Han;Kim, Sang-Hoon;Hwang, Jeoung-Yeon;Kang, Hyung-Ku;Lee, Whee-Won;Kim, Jong-Hwan;Kim, Young-Hwan;Seo, Dae-Shik
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2005.07a
    • /
    • pp.451-452
    • /
    • 2005
  • In this study, the threshold voltage and the response time of thermal stressed TN-LCDs showed the same performances on none thermal stressed TN-LCDs. There was little change in TN cells. Also, while increasing thermal stress time, the transmittances of TN-LCDs on the rubbed PI surface were almost the same, But the thermal stability of TN cell was deteriorated.

  • PDF

Viewing angle control of TN-LCD using optical compensation of two LC layers (두 액정 층의 광학적 보상을 이용한 비틀린 네마틱 액정 셀의 시야각 조절)

  • Choi, Min-Oh;Lim, Young-Jin;Jeong, Eun;Lee, Seung-Hee
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2006.06a
    • /
    • pp.479-480
    • /
    • 2006
  • We have studied the viewing angle control of a twist nematic liquid crystal display (TN-LCD). The TN-LCD exhibits a bad image quality along vertical direction, due to characteristics such as low contrast ratio and gray scale inversion. The proposed new TN-LCD has the function of switching between the wide viewing mode and narrow viewing angle mode using two tilted LC layers at both sides of a TN-cell. Tilt angles of the two LC layers, $14^{\circ}$ and $60^{\circ}$ were required in both wide viewing angle and narrow viewing angle modes, respectively.

  • PDF

Temporal and spatial variation analysis on nutritive salt of Hongze Lake

  • Zhang, Min;Chu, Enguo;Xu, Ming;Guo, Jun;Zhang, Yong
    • Environmental Engineering Research
    • /
    • v.20 no.1
    • /
    • pp.19-24
    • /
    • 2015
  • This paper mainly focuses on the research of the monitoring data about the total nitrogen (TN), total phosphorus (TP) of ten monitoring points of Hongze Lake in 28 years. Our study adopts the technical methods such as difference comparison, correlation analysis, Mann-Kendall, etc. to analyze the statistical characteristics, regional differences, and temporal and spatial variation condition of ten monitoring points of Hongze Lake in 1986-2013 as well as the reason for the time and space variation of TN and TP. The results show that the TN and TP of Hongze Lake change dramatically during the period of 1994-2004. In all the monitoring periods, TN and TP of the HZ5, HZ6, HZ7, HZ8 monitoring points in the estuary surrounding the Huaihe River are the highest, which suggests that TN and TP of Hongze Lake should not be ignored for the pollution along the Huaihe River. The TN concentration in the core area is the highest, but that in the development control area is the lowest. In most of the years, TN concentration is higher than 2 mg/L, and the water quality is V class and poor V class water quality in China's Environmental Quality Standards for Surface Water (GB3838-2002). TP concentration of the three areas is basically close, that is lower than 2 mg/L in most of the years, and the water quality is within the V class. The TN and TP concentration of Hongze Lake decreased and intensifying trend of eutrophication is controlled after 2004.

Hazards and Solutions of Loss of the PEN Conductor in TN-C-S System (TN-C-S계통에서 PEN도체의 단선고장의 위험성 및 보호대책)

  • Lee, Bok-Hee;Lee, Kyu-Sun;Ahn, Chang-Hwan;Kim, Han-Su
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.21 no.8
    • /
    • pp.113-120
    • /
    • 2007
  • This paper presents the electric shock hazards and solutions of loss of the combined protective and neutral (PEN) conductor in TN-C-S system. In order to mitigate the touch voltage on exposed-conductive-parts in a break in the PEN conductor, the touch voltages on exposed-conductive-parts in a break in the PEN conductor were experimentally investigated as a function of the ground resistances of the source grounding electrode and customer's additional grounding electrode. As a result, the equipotential bonding is one of important requirements for installations supplied by TN-C-S system. A solution of mitigating the touch voltages on exposed-conductor-parts caused by a loss of the PEN conductor would be the installation of the additional grounding electrode at the customer's service entrance. The ground resistance of additional grounding electrode necessary to limit the touch voltage to a safety voltage of less than 50[V] depends on the load and circuit parameters. In addition, the undervoltage sensing devices oner affordable solutions to detect a loss of the PEN conductor in TN-C-S system.

Evaluation of the Protection Performance of TT and TN Systems for Low-Voltage Consumers Against Lightning Surges (저압수용가에 공급하는 TT, TN계통의 뇌서지에 대한 보호성능의 평가)

  • Lee, Kyu-Sun;Choi, Jong-Hyuk;Lee, Bok-Hee
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.24 no.6
    • /
    • pp.67-74
    • /
    • 2010
  • Most of domestic low-voltage consumers are supplied from the TN-C system of KEPCO, but their load installations have established according to the national statutory standard for electrical installations based on the TT system. In this work, to propose the proper system earthing arrangements of ensuring the protection of information-technology equipment against lightning surges, the protection performance of TT and TN systems against lightning surges was investigated. As a result, when lightning surge was injected to the neutral line of distribution system, the potential difference between the equipment earth terminal and neutral point of low-voltage mains in a TT system was significantly raised. The TT system is not advised due to the risk of damage to the sensitive computer equipment. Main equipotential bonding is an important requirement for protection of low-voltage installations against lightning surges. The TN system provides the best means to reduce the incoming lightning surges through the neutral line of low-voltage service systems. In addition, It is highly recommended to install the additional earthing at the service position of low-voltage consumers.

Mutagenesis of Slow Growing Rhizobium japonicum by Transposon Tn5 (Transposon Tn5를 이용한 Slow growing Rhizobium japonicum의 돌연변이 유도)

  • Kim, Sung-Hoon;Rhee, Yoon;Sun, Dae-Kyu;Yoo, Ick-Dong
    • Korean Journal of Microbiology
    • /
    • v.26 no.4
    • /
    • pp.305-311
    • /
    • 1988
  • The spectinomycin resistant strain of slow growing R. japonicum R-168 was selected to be participated in conjugation with E. coli WA803/pGS9. Tn5 was introduced from suicide vector pGS9 into R. japonicum R-168 $spr^{r}$ chromosome at the frequency of $1.0\times 10^{-5}-5.0\times 10^{-7}$ and the transconjugante were selected on the yeast extract-mannitol plate containing kanamycin ($50{\mu}$g/ml) and spectinomycin ($100{\mu}$g/ml) after 8-9 days incubation. All transconjugants we tested were found to contain Tn 5 DNA on their genome, which was confirmed by Southern hybridization experiments. R. japonicum RNa75, which had been selected through plant test, was found to be defective in symbiotic nitrogen fixing ability and the production of leghemoglobin in soybean nodules formed by the inoculation of this mutant. In addition, this mutant strain hardly developed nitrogenase activity asymbiotically in contrast with the wild type strain, indicating that some nitrogen fixing gene might be blocked in this strain and the production of leghemoglobin could be decreased by the interference in nitrogen fixing genes.

  • PDF