• Journal of Korean Neurosurgical Society
• /
• v.47 no.4
• /
• pp.252-257
• /
• 2010

Objective : Barbiturate coma therapy (BCT) is a useful method to control increased intracranial pressure (IICP) patients. However, the complications such as hypotension and hypokalemia have caused conditions that stopped BCT early. The complications of low dose BCT with $Bispectral^{TM}$ index (BIS) monitoring and those of high dose BCT without BIS monitoring have been compared to evaluate the efficacy of low dose BCT with BIS monitoring. Methods : We analyzed 39 patients with high dose BCT group (21 patients) and low dose BCT group (18 patients). Because BIS value of 40-60 is general anesthesia score, we have adjusted the target dose of thiopental to maintain the BIS score of 40-60. Therefore, dose of thiopental was kept 1.3 to 2.6 mg/kg/hour during low dose BCT. However, high dose BCT consisted of 5 mg/kg/hour without BIS monitoing. Results : The protocol of BCT was successful in 72.2% and 38.1% of low dose and high dose BCT groups, respectively. The complications such as QT prolongation, hypotension and cardiac arrest have caused conditions that stopped BCT early. Hypokalemia showed the highest incidence rate in complications of both BCT. The descent in potassium level were $0.63{\pm}0.26$ in low dose group, and $1.31{\pm}0.48$ in high dose group. The treatment durations were $4.89{\pm}1.68$ days and $3.38{\pm}1.24$ days in low dose BCT and high dose BCT, respectively. Conclusion : It was proved that low dose BCT showed less severe complications than high dose BCT. Low dose BCT with BIS monitoring provided enough duration of BCT possible to control ICP.

• Journal of Korean Society of Rural Planning
• /
• v.9 no.3 s.20
• /
• pp.35-39
• /
• 2003

In this study, the longevity index was suggested for researches about social and environmental effects to human immorality and criteria for defining longevity area were developed using statistical analysis. Candidates indexes based on researches about the tend of human death ratio were investigated. As a result statistical analysis, ratio of population over 85 yearn old and over 65 years was selected as a longevity index. Statistical analysis on the longevity distribution at each district showed that 'eup' and 'myun' are appropriate spatial unit to study social and geographical characteristics of longevity. The spatial analysis using the $ArcView^{TM}$ with the suggested index shows the time dependent variances of degree of immorality and spatial relationship between degree of immorality and human migration.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.146-147
• /
• 2000

The electromagnetic wave scattering from active objects has only recently attracted attention.$^{(1).(3)}$ Theoretical studies have considered normal-incidence plane-wave interactions with active dielectric cylinders with the prediction of large enhancements in the scattered field for bound mode structures. According to the theory of the electromagnetic wave scattering from a dielectric cylinder, the eigenvector solutions are discrete and have both guided (non-radiative) and leaky (radiative) mode solutions. By using an anti-guiding (leaky) structure instead of a guided structure and scattering at oblique incident angles near critical angle, the scattering resonances predicted by theoretical studies were obtained for the first time. A fine-grained scan of the plane-wave incident angle a reveals the existence of discrete scattering resonances. The diameter and real part of the index of refraction determine the resonant conditions and the imaginary part of the refractive index has a threshold value to make mode up for its radiation loss. The cross coupling between transverse electric (TE) and transverse magnetic (TM) modes is clearly detected for both active and passive scattering as theoretically expected. (omitted)

• Design & Manufacturing
• /
• v.1 no.1
• /
• pp.17-21
• /
• 2007

In the manufacture and processing of large plastic materials, product quality is tested and verified through several techniques such as injection processing, residual stress through injection molding and shrinkage. With regards to the injection molding process, common problems such as inconsistent density is seen when different points of the product are discovered to have varying thickness levels. Sink marks in product are then evident. This occurs when there is poor molding conditions caused about by poor runner and packaging systems incorporated into the process. We designed the runner system which is possible balanced filling to cavities using CAE program $Moldflow^{TM}$ and then obtained optimal processing conditions by Taguchi's Robust Design technique.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.4
• /
• pp.85-98
• /
• 2003

There has recently been an increasing interest of the watershed management as a solution to a wide range of problems related water environment, therefore this study attempted to construct the environment information system to monitor the Geumho River watershed, and to evaluate the impacts of the watershed characteristics on stream water quality. A detailed GIS database to analyze the environmental characteristics at the subwatershed units, including 1:25,000 scale topographical maps, detailed soil maps, land use, 10m-resolution DEMs, roads, streams, vegetation index(NDVI) calculated from Landsat TM imagery, rainfall, and soil loss using RUSLE, is compiled for the study area. The set of variables representing watershed urbanization or industrialization, residential and commercial landuse, industrial landuse, and road area have significantly negative(-) relationship with water quality variables(BOD, COD, SS, T-N, T-P). On the other hand, watershed indicators related to natural environmental conditions, forest cover and vegetation index(NDVI) in each subwatershed were significantly positive(+) relationship with water quality. Three other variables, agricultural landuse, amount of fertilizer and pesticides, and potential soil loss, were not significant in explaining the correlations between watershed environment and stream water quality.

• Korean Journal of Agricultural Science
• /
• v.37 no.1
• /
• pp.81-86
• /
• 2010

The urban thermal environment can be an important index to detect heat island phenomena and manage it to improve urban life quality. Cheongju is a typical plain-city that main part has been formed and developed in lowland. The Mushim stream crosses the city from south to north. We reviewed the use of thermal remote sensing in stream around areas and the thermal environments, focusing primarily on the Urban Heat Island(UHI) effect. The purpose of this study is to determine the relationship between the stream nearby urban area and the stream cooling effect of UHI. The objectives are to determine the usefulness of KOMPSAT-2 bands MS3 and MS4 for vegetation cover mapping, and the usefulness of LANDSAT TM band 6 in identifying thermal environmental characteristics and UHI. Land Surface Temperatures (LST) are retrieved by single-channel algorithm to study the UHI from the 6th band (thermal infrared band) of LANDSAT TM images and thermal radiance thermometer based on remote sensing method and the LST distribution maps are accomplished according to the retrieval results. There is also comparison of satellite-derived and in situ measured temperature. The results indicated that the LST of urban center is higher than that of suburban area, the temperature of mountain and water are the lowest area, so it is clearly proved that there are obvious UHI effects by stream. The surface temperature distribution of Mushim stream is detected $2^{\circ}C$ lower than urban area.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.148-155
• /
• 2020

The purpose of the study was to test the reliability and validity of the Korean version of Pittsburgh Sleep Quality Index (PSQI-K) and to examine the cutoff point of the PSQI-K for screening insomnia among young adults. The subjective quality and patterns of sleep in 64 participants were measured using PSQI-K and Fitbit Charge 3^TM. The properties of the instrument were analyzed using Cronbach's alpha coefficient for the internal consistency reliability, factor analysis for the construct validity, and Spearman's rho correlation coefficient for the correlation between the PSQI-K total scores and Fitbit tracker scores. The Cronbach's alpha coefficient of the PSQI-K was 0.69. The Spearman's rho correlation coefficient between the PSQI-K and Fitbit tracker was higher than 0.67. A cutoff point of ≥6.0 had a sensitivity of 0.93 and a specificity of 0.84. In conclusion, the PSQI-K is a reliable and valid instrument to evaluate sleep disturbance in Korean young adults.

• Ocean Systems Engineering
• /
• v.12 no.1
• /
• pp.87-142
• /
• 2022

An analysis for the computation of Fatigue Damage Index (FDI) under the effects of the various combination of the ocean loads like random waves, current, platform motion and VIV (Vortex Induced Vibration) for a certain design water depth is a critically important part of the analysis and design of the marine riser platform integrated system. Herein, a 'Computer Simulation Model (CSM)' is developed to combine the advantages of the frequency domain and time domain. A case study considering a steel catenary riser operating in 1000 m water depth has been conducted with semi-submersible. The riser is subjected to extreme environmental conditions and static and dynamic response analyses are performed and the Response Amplitude Operators (RAOs) of the offshore platform are computed with the frequency domain solution. Later the frequency domain results are integrated with time domain analysis system for the dynamic analysis in time domain. After that an extensive post processing is done to compute the FDI of the marine riser. In the present paper importance is given to the nature of the current profile and the VIV. At the end we have reported the detail results of the FDI comparison with VIV and without VIV under the linear current velocity and the FDI comparison with linear and power law current velocity with and without VIV. We have also reported the design recommendations for the marine riser in the regions where the higher fatigue damage is observed and the proposed CSM is implemented in industrially used standard soft solution systems (i.e., OrcaFlex^*TM and Ansys AQWA^**TM), Ms-Excel^***TM, and C++ programming language using its object oriented features.

• Journal of Environmental Science International
• /
• v.15 no.4
• /
• pp.373-378
• /
• 2006

The western coast of South Korea is famous for its large and broad tidal lands. Nevertheless, land reclamation, which has been conducted on a large scale, such as Sihwa embankment construction project has accelerated coastal environmental changes in the embankment inland. For monitoring of environmental change, vegetation change detecting of the embankment inland were carried out and field survey data compared with Landsat TM, ETM+, IKONOS, and EOC satellite remotely sensed data. In order to utilize multi-temporal remotely sensed images effectively, all data set with pixel size were analyzed by same geometric correction method. To detect the tidal land vegetation change, the spectral characteristics and spatial resolution of Landsat TM and ETM+ images were analyzed by SMA(spectral mixture analysis). We obtained the 78.96% classification accuracy and Kappa index 0.2376 using March 2000 Landsat data. The SMA(spectral mixture analysis) results were considered with comparing of vegetation seasonal change detection method.

• The korean journal of orthodontics
• /
• v.43 no.5
• /
• pp.235-241
• /
• 2013

Objective: The purpose of this study was to investigate whether extension of the custom base is necessary for enhancement of bond strength, by comparing the debonding forces and residual adhesives of 3 different lingual bracket systems. Methods: A total of 42 extracted upper premolars were randomly divided into 3 groups of 14 each for bonding with brackets having (1) a conventional limited resin custom base; (2) an extended gold alloy custom base: Incognito${TM}$; and (3) an extended resin custom base: KommonBase${TM}$. The bonding area was measured by scanning the bracket bases with a 3-dimensional digital scanner. The debonding force was measured with an Instron universal testing machine, which applied an occlusogingival shear force. Results: The mean debonding forces were 60.83 N (standard deviation [SD] 10.12), 69.29 N (SD 9.59), and 104.35 N (SD17.84) for the limited resin custom base, extended gold alloy custom base, and extended resin custom base, respectively. The debonding force observed with the extended resin custom base was significantly different from that observed with the other bases. In addition, the adhesive remnant index was significantly higher with the extended gold alloy custom base. Conclusions: All 3 custom-base lingual brackets can withstand occlusal and orthodontic forces. We conclude that effective bonding of lingual brackets can be obtained without extension of the custom base.