• 비파괴검사학회지
• /
• 제19권5호
• /
• pp.363-368
• /
• 1999

시험체의 두께나 초음파 속도를 측정하기 위해서 초음파 펄스-에코법이 널리 사용되고 있다. 초음파 속도를 결정하기 위해서는 초음파 송수신 장치를 포함한 오실로스코우프와 같은 초음파 측정 장치를 사용하여 시험편에서의 초음파진행 시간을 측정하고, 초음파 진행 거리에 해당하는 시험편의 두께를 버어니어 캘리퍼스 또는 마이크로미터와 같은 길이측정 도구를 사용하여 측정한다. 그리고 초음파를 이용하여 시험편의 두께를 측정할 때에는 초음파 속도를 알고 있는 대비 시험편으로 기준을 설정하여야 한다. 본 연구에서는, 대비 시험편 없이 재료의 두께와 초음파 속도를 동시에 구하는 방법을 제시하였다. 재질과 두께를 달리한 여러 시험편에서 측정된 초음파 속도와 두께가 기존의 방법에 의해 측정한 값과 잘 일치하였다.

• Archives of Plastic Surgery
• /
• 제39권5호
• /
• pp.528-533
• /
• 2012

Background Rectus abdominis muscle and abdominal subcutaneous fat tissue are useful for reconstruction of the chest wall, and abdominal, vaginal, and perianal defects. Thus, preoperative evaluation of rectus abdominis muscle and abdominal subcutaneous fat tissue is important. This is a retrospective study that measured the thickness of rectus abdominis muscle and abdominal subcutaneous fat tissue using computed tomography (CT) and analyzed the correlation with the patients' age, gestational history, history of laparotomy, and body mass index (BMI). Methods A total of 545 adult women were studied. Rectus abdominis muscle and abdominal subcutaneous fat thicknesses were measured with abdominopelvic CT. The results were analyzed to determine if the thickness of the rectus abdominis muscle or subcutaneous fat tissue was significantly correlated with age, number of pregnancies, history of laparotomy, and BMI. Results Rectus abdominis muscle thicknesses were 9.58 mm (right) and 9.73 mm (left) at the xiphoid level and 10.26 mm (right) and 10.26 mm (left) at the umbilicus level. Subcutaneous fat thicknesses were 24.31 mm (right) and 23.39 mm (left). Rectus abdominismuscle thickness decreased with age and pregnancy. History of laparotomy had a significant negative correlation with rectus abdominis muscle thickness at the xiphoid level. Abdominal subcutaneous fat thickness had no correlation with age, number of pregnancies, or history of laparotomy. Conclusions Age, gestational history, and history of laparotomy influenced rectus abdominis muscle thickness but did not influence abdominal subcutaneous fat thickness. These results are clinically valuable for planning a rectus abdominis muscle flap and safe elevation of muscle flap.

• 동의생리병리학회지
• /
• 제26권4호
• /
• pp.539-545
• /
• 2012

To evaluate of the ultrasonographic changes in hemiplegic and unaffected knee joints of hemiplegic ambulators with recent onset stroke. Twenty patients (40 knees) with prevalence duration of 14-39 weeks (mean 24.70 weeks) after a stroke insult were included. All participants were walking independently without leg dragging, had no previous knee injury. There were significant differences in intercondylar cartilage thickness and pes anserinous tendinopathy (PAT) between hemiplegic and unaffected knees (p<0.05). There were no differences in cartilage thickness of medial condyle and lateral condyle, patellar tendinitis/bursitis, suprapatellar effusion, synovitis, joint space narrowing, and Baker's cyst of ultrasonographic findings and x-ray findings in hemiplegic knee compared to the control except PAT (p<0.05). In hemiplegic knee, medial or lateral condylar cartilage thickness was significantly correlated with body weight, intercondylar cartilage thickness, and PAT (p<0.05). PAT was significantly correlated with Brunnnstrom stage and condylar cartilage thickness (p<0.05). Knee pain was significantly correlated with lateral condylar cartilage thickness (p<0.1). The hemiplegic knee had more ultrasonographic abnormalities including PAT and more cartilage thickness preservation in patient with recent onset stroke. Intraarticular sonographic findings including cartilage thickness was significantly correlated with extraarticular findings including PAT and a symptom of knee pain.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권3호
• /
• pp.335-341
• /
• 2003

Carcass weight and backfat thickness are two of important elements in determining the carcass trait in pigs and are studied on animal genetics, nutrition, and endocrinology. Growth factors stimulate or inhibit the proliferation and differentiation of various cells. In particular, insulin-like growth factors (IGFs), transforming growth factor (TGF)-$\beta$, and epidermal growth factor (EGF) are involved in the growth and maintenance of muscle. Also, dehydroepiandrosterone-sulfate (DHEA-S) and cortisol are known to be related to the obesity and subcutaneous fat depth in pigs. Therefore, this study was performed to relate growth factors (IGFs, TGF-${\beta}1$, and EGF) and hormones (cortisol and DHEA-S) concentrations at antemortem and postmortem periods to carcass traits including carcass weight and backfat thickness. Blood and m. Longissimus were collected in pigs at antemortem (30 days before slaughter) and postmortem periods. After slaughtered, carcass weight and backfat thickness were measured. Growth factors and hormones in serum and m. Longissimus were measured by radioimmunoassay or enzyme-linked imuunosorbent assay. Before antemortem period, serum IGF-I and -II concentrations were positively correlated with the carcass weight and backfat thickness in gilts, and the concentrations of TGF- ${\beta}1$ and cortisol in barrows show the correlation with only carcass weight. Also, the positive correlations of muscular IGFs and TGF-${\beta}1$ at postmortem 45 min with the carcass weight and backfat thickness were detected. Consequently, these results suggest that the serum and muscular endocrine factors are involved in the carcass weight and backfat thickness in pigs.

• 대한치과보철학회지
• /
• 제33권4호
• /
• pp.634-644
• /
• 1995

The purpose of this study is to evaluate the color differences in the In-Ceram according to coping thickness and various abutment core materials ; amalgam, precious alloy, composite resin, non-precious alloy. After the porcelain was built up on the In-Ceram coping at the thicknes of 0.3mm and 0.5mm then it was cemented with glass ionomer cement to the post & core materials. The following results were obtained. 1. There were significant differences in the $L^*$ values $a^*$ and $b^*$ values in the cementation of different cores, to the In-Ceram(P<0.01). $L^*$ values were not significantly different between the composite resin to the In-Ceram and the $a^*\;b^*$ values were not significantly different between the amalgam and the non-precious alloy. 2. All of cementations of In-Ceram to the core materisal had color difference(${\Delta}E^*ab$) compared to the In-Ceram. In the 0.3mm thickness of the In-Ceram copping non-precious alloy indicated the greatest value, while the composite resin core showed the lowest value with a thickness of 0.5mm In-Ceram copping. 3. By controlloing the In-Ceram coping thickness $L^*$ value was significatly different(P<0.01), but not in $a^*$ and $b^*$ values. 4. In an amalgam, precious & non-prcious alloys there was a 1,74 to 3.06 range color difference in the controlled thickness of In-Ceram coping at the thickness of 0.3mm and 0.5mm. The above results suggest that the requirement of the sufficient thickness of In-Ceram coping and the suitable core material in order to get an estheti restoration by In-Ceram and also to intercept the original core color.

• 한국산학기술학회논문지
• /
• 제14권4호
• /
• pp.1533-1539
• /
• 2013

본 논문에서는 층류 및 난류 유동 특성 중 경계층 두께와 배제 두께, 그리고 모멘텀 두께에 대한 기존의 이론값과 실제 CFD 해석을 통한 수치해석의 데이터를 비교하였다. Freestream velocity는 Reynolds 수에 영향을 주게 되고, airfoil 주변에서의 유동의 층류 및 난류에 영향을 주게 된다. 층류 및 난류의 경우 유동특성이 달라 경계층 두께 및 배제두께, 그리고 모멘텀 두께가 달라지게 되고, 결국 airfoil의 공력특성인 양력과 항력, 그리고 pitching moment에 영향을 주며, separation point도 다양한 angle of attack에서 바뀌게 된다. 이번 연구에서의 목적은 비점성 유동과, 층류 및 난류 각 경우에 대한 유동특성에 대해 알아보는 것이다. 연구에서 사용된 airfoil의 경우 c=1인 Joukowski airfoil을 사용하였으며, CFD는 상용 프로그램인 Fluent 6.0을 통해 NACA-0012 airfoil을 사용하였다. 층류 및 난류에서의 $Re_c$는 $Re_c$=3,000, 700,000이며 각각에 해당하는 속도는 0.045, 10 m/s이다. 본 연구를 통해 기존의 실험값과 수치해석의 결과가 잘 일치함을 알 수 있으며, 이를 통해 다양한 airfoil의 형상을 모델링할 수 있는 근거를 마련하였다.

• 대한물리의학회지
• /
• 제10권1호
• /
• pp.71-82
• /
• 2015

PURPOSE: The aim of this study is to compare changes in the thickness of the gluteus medius muscle fiber between chronic low back pain(clbp) with gluteus medius weakness and healthy subject. METHODS: Ultrasound imaging was used to measure in the thickness of each fiber of the gluteus medius muscle based on maximal muscle contraction during abduction motion of the hip joint in a healthy group (11 subjects) and a chronic CLBP group (21 subjects). An independent t-test was performed to analyze the difference of thickness in each fiber of the gluteus medius muscle and the rate of changes in the fibers in the two groups. RESULTS: The fiber thickness changes in the gluteus medius muscle were significantly lower for the posterior fiber in the CLBP group compared to the healthy group (p<0.01). The changes in rate of difference of thickness the posterior part of the gluteus medius muscle was significantly lower in the CLBP group than in the healthy group (p<0.05). CONCLUSION: The findings of this study CLBP patients with weakness of the gluteus medius muscle that lower for the posterior fiber's difference of thickness and rate of change in the CLBP group compared to the healthy group. Indicate that rehabilitation of CLBP patients with weakness of the gluteus medius muscle should consider the functions of posterior fiber of the gluteus medius muscle.

• 대한방사선기술학회지:방사선기술과학
• /
• 제43권3호
• /
• pp.161-167
• /
• 2020

This study aimed to found out the effect of patellofemoral overlap distance by changing femur thickness and center X-ray angles in Merchant method images. Based on the femur thickness, it suggested tube angle minimizes overlap. It was conducted by Merchant method, a knee tangential view, and the image was obtained by changing the thigh thickness from 14 to 20 cm and the center ray angle from 60°, 57°, 55°. The images were measured by five researchers using a method of measuring the overlap, which was designed by them. The results showed at 60°, 57°, 55° angle, the patellofemoral overlap distance resulted in 0.47±0.66 to 20.89±0.65 cm, 2.26±0.28 to 15.73±0.62 cm, 1.39 ± 0.83 to 12.49 ± 0.37 cm. However, for 57° and 55°, no overlap in thickness under 14.5 and 14 to 15.5 didn't appear. it showed high correlation between femur thickness and overlap. The difference in the mean value of overlap in each group showed a statistically significant difference (p<0.01), all were classified as independent groups in the post-hoc test. In all images, the patellofemoral overlap distance increased as the thickness increased, and at the average thickness of Korean men and women, overlap decreased when reducing center ray. When conducting Merchant tests on Koreans, it was suggested it would be useful to use 57° angle because it minimize the effects of overlap and intrusions of tibia.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제46권5호
• /
• pp.313-320
• /
• 2020

Objectives: The aim of this study was to evaluate the relationship between masticatory muscle thickness and mandibular morphology in young Korean adults with normal occlusion and mandibular prognathism. Patients and Methods: Multidetector computed tomography (MDCT) was used to measure the masticatory muscle thickness on the right side in 100 Korean young adults (50 normal occlusion group, 50 mandibular prognathism group). Cephalometric analysis was done to measure mandibular morphology. Pearson correlation analysis was done to investigate the relationship between the masticatory muscle thickness and mandibular morphometry. Results: The four masticatory muscles showed positive correlation with intergonial width in all subjects. All muscles, except temporalis, positively correlated with height of the ramus and mandibular length. Positive correlation was also observed in all muscles, except medial pterygoid, with thickness of the ramus. In the normal occlusion group, all four masticatory muscles showed positive correlation with intergonial width and ramus thickness. Positive correlation was also observed in all muscles (except lateral pterygoid) with mandibular length. Masseter and lateral pterygoid positively correlated with height of the ramus. In the mandibular prognathism group, all masticatory muscles, except lateral pterygoid, showed positive correlation with intergonial width. The masseter muscle showed negative correlation with ANB. Conclusion: The results suggest a positive correlation of the thickness of masticatory muscles with both horizontal and vertical dimensions of the mandible. However, thickness of the masseter was found to decrease in patients with increasing severity of mandibular prognathism.

• 대한치과보철학회지
• /
• 제45권6호
• /
• pp.724-734
• /
• 2007

Statement of problem. Translucency and masking effect of provisional crown and fixed partial denture materials is an important esthetic consideration. But, provisional resin materials differ substantially in their ability to mask underlying colors. Purpose. The purpose of this study was to evaluate the translucency differences of provisional resin materials at various thicknesses and the correlation between the translucency and the masking efficiency. Material and methods. Two polymethyl methacrylate resins (Jet Tooth Shade, Alike) and three resin composites (Protemp 3 Garant, Luxatemp and Revotek LC) were used. Specimens (n=6) were fabricated from each material in 0.3, 0.5, 0.8, 1.0, 1.5, 2.0 and 3.0 mm thickness. The CIELAB parameters of each specimens were measured using a spectrophotometer. The translucency parameter (TP) values and the masking effect $({\Delta}ME^*{_{ab}})$ values were computed and all data were statistically analyzed by one-way ANOVA and the multiple comparisons Scheffe test. The correlation between the thickness and the TP values and the correlation between the thickness and the ${\Delta}ME^*{_{ab}}$ values were also evaluated by correlation analysis and regression analysis. Results. The TP values and the ${\Delta}ME^*{_{ab}}$ values were significantly related to the thickness in all specimens. The TP values were more sensitive to the change of thickness than the ${\Delta}ME^*{_{ab}}$ values. The order of the translucency by brand was different from the order of the masking effect by brand in all thickness groups. Conclusion. Within the limitations of this study, the translucency and masking effect of the provisional resin materials investigated were significantly related to their thickness. The masking effect of provisional resin was correlated with the translucency parameter, but the order of the masking effect by brand was different from the order of the translucency parameter.