• Food Science of Animal Resources
• /
• v.30 no.3
• /
• pp.495-503
• /
• 2010

Analyses were conducted to estimate the effect of quality grade on the carcass characteristics, physico-chemical and sensory traits of Longissimus dorsi in Hanwoo. A total of 42,113 carcasses were selected on the basis of five quality grades (grade $1^{++}$, $1^+$, 1, 2, and 3) and an additional 258 samples of Longissimus dorsi were used to evaluate the beef quality. The increase in quality grade from grade 3 to grade $1^{++}$ was significant (p<0.05) for carcass weight (from 338.7 kg to 387.2 kg), backfat thickness (from 7.45 mm to 12.23 mm) and marbling score (from 1.09 to 8.31). In contrast, significantly decreased levels of meat color, fat color, texture and maturity were apparent with increasing quality grade (p<0.05). Increasing quality grade was also correlated with significant increases (p<0.05) in crude fat contents (from 3.57% to 25.68%) and water holding capacity (from 52.41% to 58.03), and a decrease of the Warner-Bratzler shear force from 8.29 kg to 2.83 kg. The highest $L^*$ value (41.53) and highest cooking loss (22.11%) were observed with grade $1^{++}$ and 3 beef, respectively. There was no difference observed on $pH_{24}$ (5.53 to 5.66) among the quality grades, which were within the normal range. Sensory evaluation experiments revealed that quality grades were associated with significantly altered (all p<0.05) tenderness, juiciness, flavor, and overall acceptability. The crude fat contents showed significant correlation with juiciness (r=0.59), tenderness (r=0.71), flavor (r=0.55), and overall acceptability (r=0.69). The lower sensory trait scores were related to higher WBs. Grade $1^+$ Hanwoo beef had a significantly higher WBs and lower fat contents when compared to grade $1^{++}$ Hanwoo beef (p<0.05).

• Fire Science and Engineering
• /
• v.18 no.1
• /
• pp.54-66
• /
• 2004

In this article, we are to suggest the hazard-assessing method for the underground pipelines, and find out the pipeline-maintenance schemes of high efficiency in cost. Three kinds of methods are applied in order to refer to the approaching methods of listing the hazards for the underground pipelines: the first is RBI(Risk Based Inspection), which firstly assess the effect of the neighboring population, the dimension, thickness of pipe, and working time. It enables us to estimate quantitatively the risk exposure. The second is the scoring system which is based on the environmental factors of the buried pipelines. Last we quantify the frequency of the releases using the present THOMAS' theory. In this work, as a result of assessing the hazard of it using SPC scheme, the hazard score related to how the gas pipelines erodes indicate the numbers from 30 to 70, which means that the assessing criteria define well the relative hazards of actual pipelines. Therefore. even if one pipeline region is relatively low score, it can have the high frequency of leakage due to its longer length. The acceptable limit of the release frequency of pipeline shows 2.50E-2 to 1.00E-l/yr, from which we must take the appropriate actions to have the consequence to be less than the acceptable region. The prediction of total frequency using regression analysis shows the limit operating time of pipeline is the range of 11 to 13 years, which is well consistent with that of the actual pipeline. Concludingly, the hazard-listing scheme suggested in this research will be very effectively applied to maintaining the underground pipelines.

• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1278-1284
• /
• 2000

The study was performed to elucidate the effects of ethylene-absorbent on the quality of 'Fuyu' persimmon fruits in the MA package. Five persimmons were packed in a MA package film (low density polyethylene, 0.055 mm film thickness), and stored at $-0.5^{\circ}C$ for 60 days. Two persimmons were repacked in a MA package with or without ethylene absorbent $(1\;M\;KMnO_4+zeolite)$ and stored at $-0.5^{\circ}C$. Ten days later, these packages was moved to $2^{\circ}C$ or $25^{\circ}C$ storage room to examine the effect of the ethylene-absorbent on the quality of the fruits. Ethylene removal by enclosed ethylene absorbent in MA packaging reduced the rate of fruit respiration at $25^{\circ}C$, so that $O_2$ and $CO_2$ concentration in packing were maintained higher and lower, respectively, compared to control. These effects were not observed, however, in $2^{\circ}C$ post-storage. Fruit firmness and sugar composition were also influenced by ethylene absorbent, showing more delayed flesh softening and higher sucrose concentration in ethylene absorbent treated fruits than control. But ethylene-absorbent treatment lowered glucose and fructose concentration. That shows that ethylene could influence on sugar composition by inhibiting sucrose inversion to glucose and fructose. The production of ethanol and acetaldehyde was reduced by ethylene removal, but the effect was not so high as other quality indices.

• Restorative Dentistry and Endodontics
• /
• v.30 no.6
• /
• pp.450-460
• /
• 2005

The aim of this study was to evaluate the effect of cavity shape, bond quality of bonding agent and volume of resin composite on shrinkage stress developed at the cavity floor. This was done by measuring the shear bond strength with respect to iris materials (cavity shape , adhesive-coated dentin as a high C-factor and Teflon-coated metal as a low C-factor), bonding agents (bond quality: $Scotchbond^{TM}$ Multi-purpose and Xeno III) and iris hole diameters (volume; 1mm or 3mm in $diameter{\times}1.5mm$ in thickness). Ninety-six molars were randomly divided into 8 groups ($2{\times}2{\times}2$ experimental setup). In order to simulate a Class I cavity, shear bond strength was measured on the flat occlusal dentin surface with irises. The iris hole was filled with Z250 restorative resin composite in a bulk-filling manner. The data was analyzed using three-way ANOVA and the Tukey test. Fracture mode analysis was also done When the cavity had high C-factor, good bond quality and large volume, the bond strength decreased significantly The volume of resin composite restricted within the well-bonded cavity walls is also be suggested to be included in the concept of C-factor, as well as the cavity shape and bond quality. Since the bond quality and volume can exaggerate the effect of cavity shape on the shrinkage stress developed at the resin-dentin bond, resin composites must be filled in a method, which minimizes the volume that can increase the C-factor.

• Restorative Dentistry and Endodontics
• /
• v.32 no.1
• /
• pp.1-8
• /
• 2007

This study compared the microshear bond strength (${\mu}SBS$) of light-cured and dual-cured composites to enamel bonded with three self-etching adhesives. Crown segments of extracted human molars were cut mesiodistally, and 1 mm thickness of specimen was made. They were assigned to three groups by used adhesives: Xeno group (Xeno III), Adper group (Adper Prompt L-Pop), and AQ group (AQ Bond). Each adhesive was applied to cut enamel surface as per manufacturer's instruction. Light-cured (Filtek Z 250) or dual-cured composite (Luxacore) was bonded to enamel of each specimen using Tygon tube. After storage in distilled water for 24 hours, the bonded specimens were subjected to ${\mu}SBS$ testing with a crosshead speed of 1 mm/minute. The mean ${\mu}SBS$ (n = 20 for each group) was statistically compared using two-way ANOVA, Tukey HSD, and t test at the 0.05 probability level, The results of this study were as follows ; 1. The ${\mu}SBS$ of light-cured composite was significantly higher than that of dual-cured composite when same adhesive was applied to enamel. 2. For Z 250, the ${\mu}SBS$ of AQ group ($9.95{\pm}2.51 MPa$) to enamel was significantly higher than that of Adper soup ($6.74{\pm}1.80 MPa$), but not significantly different with Xeno group ($7.73{\pm}2.01 MPa$). 3. For Luxacore, the ${\mu}SBS$ of Xeno group ($5.19{\pm}1.32\;MPa$) to enamel was significantly higher than that of Adper group ($3.41{\pm}1.19\;MPa$), but not significantly different with AQ group ($4.50{\pm}0.96\;MPa$).

• Restorative Dentistry and Endodontics
• /
• v.32 no.1
• /
• pp.69-79
• /
• 2007

The purpose of this study was to investigate the effects of composite resin restorations on the stress distribution of notch shaped noncarious cervical lesion using three-dimensional (3D) finite element analysis (FEA). Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072 ; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). ANSYS (Swanson Analysis Systems, Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid or flowable resin and each restoration was simulated with adhesive layer thickness ($40{\mu}m$) A static load of 500 N was applied on a point load condition at buccal cusp (loading A) and palatal cusp (loading B). The principal stresses in the lesion apex (internal line angle of cavity) and middle vertical wall were analyzed using ANSYS. The results were as follows 1. Under loading A, compressive stress is created in the unrestored and restored cavity. Under loading B, tensile stress is created. And the peak stress concentration is seen at near mesial corner of the cavity under each load condition. 2. Compared to the unrestored cavity, the principal stresses at the cemeto-enamel junction (CEJ) and internal line angle of the cavity were more reduced in the restored cavity on both load con ditions. 3. In teeth restored with hybrid composite, the principal stresses at the CEJ and internal line angle of the cavity were more reduced than flowable resin.

• Restorative Dentistry and Endodontics
• /
• v.32 no.1
• /
• pp.19-27
• /
• 2007

The purpose of this study is to develope new dental color-space system. Twelve kinds of dental composites and one kind of dental porcelain were used in this study. Disk samples (15 mm in diameter, 4 mm in thickness) of used materials were made and sample's CIE $L^*a^*b^*$ value was measured by Spectrocolorimeter (MiniScan XE plus, Model 4000S, diffuse/$8^{\circ}$ viewing mode, 14.3 mm Port diameters, Hunter Lab USA) The range of measured color distribution was analyzed. All the data were applied in the form of T### which is expression unit in CNU Cons Dental Color Chart. The value of $L^*$ lies between 80.40 and 52.70. The value of $a^*$ are between 10.60 and 3.60 and $b^*$ are between 28.40 and 2.21. The average value of $L^*$ is 67.40, and median value is 67.30. The value of $a^*$ are 2.89 and 2.91 respectively. And for the $b^*$, 14.30 and 13.90 were obtained. The data were converted to T### that is the unit count system in CNU-Cons Dental Color Chart. The value of $L^*$ is converted in the first digit of the numbering system. Each unit is 2.0 measured values. The second digit is the value of $a^*$ and is converted new number by 1.0 measured value. For the third digit $b^*$ is replaced and it is 2.0 measured unit apart. T555 was set to the value of $L^*$ ranging from 66.0 to 68.0, value of $a^*$ ranging from 3 to 4 and $b^*$ value ranging from 14 to 16.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.2
• /
• pp.103-110
• /
• 1991

This study was conducted to determine riboflavin status of young healthy Korean women. Eight subjects consumed general Korean diet for 3 weeks. Riboflavin intake was measured during the period and Erythrocyte Glutathione Reductase Activity coefficient (EGRAC) was analyzed at the end of experimental period. The subjects who showed EGRAC value above 1.20 were supplemented 6 mg riboflavin per day for 1 week. The average age of subjects was 22.1 years old, height was 154.4cm, weight was 49.2kg, chest circumference was 81.2cm, the sum of skinfold thickness of 3 parts was 79.5mm and Body Mass Index(BMI) was 20.6. Hemoglobin concentration was 13.0g/100ml, hematocrit value was 44.0% A/G ratio was 1.4, and the activity of sGOT, sGPT, alkaline phosphatase was 14.3, 11.0 and 6.5, respectively. The average daily intake of energy, protein and riboflavin was 1745kcal, 56.1g and 1.14mg, respectively. The mjor source of riboflavin were milk, egg, Korean cabbage, rice, beef and so on. The average EGRAC value was 1.2748. percentages of subjects who showed EGRAC value above 1.20 was 65.2%. After oral administration of 6mg riboflavin, the EGRAC value of all these subjects was returned to normal range. Riboflavin intake was correlated positively with energy as well as protein intake, and correlated negatively with EGRAC value. However, riboflavin intake per 1,000kcal was not correlated with EGRAC value.

• Journal of The Korean Ophthalmological Society
• /
• v.59 no.11
• /
• pp.1030-1038
• /
• 2018

Purpose: To evaluate whether early visual acuity response at 4 weeks after the first intravitreal anti-vascular endothelial growth factor (VEGF) injection or 4 weeks after the third injection in neovascular age-related macular degeneration (nAMD) is associated with 12-month follow-up outcome. Methods: Thirty treatment-naive patients (30 eyes) with nAMD, treated with intravitreal anti-VEGF, were retrospectively included. Initially, all patients were injected at least three times for three consecutive months and followed up with a pro re nata regimen for at least 12 months. The relationship between 4 weeks after the first and third anti-VEGF injections in visual acuity response was explored, including the mean change from baseline in best-corrected visual acuity (BCVA). The mean change in BCVA was classified into three groups according to visual improvement: <1, 1-<3, or ${\geq}3$ logMAR line(s) in BCVA. The associations among baseline characteristics (gender, age, duration of symptoms, initial BCVA, central macular thickness, and intraocular pressure) and visual acuity responses 4 weeks after the first and third anti-VEGF injections were also assessed. Results: The proportions of eyes with <1, 1-<3, and ${\geq}3-line(s)$ improvement at 4 weeks after the first injection were 6 eyes (20%), 7 eyes (23.3%), and 17 eyes (56.6%), respectively. The proportions of eyes with <1, 1-<3, and ${\geq}3-line(s)$ improvement at 4 weeks after the third injection were 9 eyes (30%), 9 eyes (30%), and 12 eyes (40%), respectively. A BCVA response ${\geq}3-lines$ improvement at 4 weeks after the third injection showed significant associations with ${\geq}3-line(s)$ improvement and BCVA response at 12 months in multiple logistic and linear regression analyses (p = 0.04). Conclusions: In this study, BCVA response ${\geq}3-lines$ improvement at 4 weeks after the third injection showed a significant association with ${\geq}3-line(s)$ improvement and BCVA response at 12 months.

• Journal of agriculture & life science
• /
• v.45 no.2
• /
• pp.93-101
• /
• 2011

This study was conducted to investigate the effect of probiotic from pine needle microbes on growth performance, blood characteristics, carcass traits and economy of pigs. One hundred eighty pigs (L${\times}$Y${\times}$D, average body weight=75 kg) were grouped and housed with 15 animals per pen for 3 replications per each treatment. The ingredients and pine needle microbes mixed and fermented on anaerobic condition for 10 days to make the fermented diet. The basal diet was substituted with 0 (CON), 3 (T1), 5 (T2) and 10% (T3) of fermented diet, the pigs were fed for 42 days and slaughtered at the end of the trial to measure the carcass traits. Crude protein concentration of fermented diet on 10 day was higher (p<0.05) than that of on 0 day, while crude fiber concentration and pH were lower (p<0.05). The supplementation of fermented diet did not affect on growth performance and feed intake. Hemoglobin concentration of whole blood in T3 was higher (p<0.05) than that of CON, and hematocrit concentrations in CON and T1 were higher (p<0.05) than that of T2 and T3. The concentration of platelet was higher (p<0.05) in T1 than in T2 and T3. The CON had higher (p<0.05) total cholesterol, LDL-cholesterol and triglycerides concentrations than the treatments, whereas lower (p<0.05) HDL-cholesterol concentration. Carcass weight and dressing in T1 and T3 were higher (p<0.05) than those of CON and T2. The backfat thickness was higher (p<0.05) in CON and T2 than in T3. The carcass grade and economy improved by supplementation of fermented diet compare to CON. In conclusion, the supplementation of fermented diet using probiotics from pine needle microbes could improve health and meat quality and reduce the feed cost of pigs.