• 한국방사선학회논문지
• /
• 제14권5호
• /
• pp.545-552
• /
• 2020

이 연구의 목적은 NCRP 보고서 151과 IAEA 안전 보고서 시리즈 47 기반으로 직접차폐식 도어의 납 두께 계산식을 유도하는 데 있다. 직접차폐식 도어에서 선량률 계산식을 유도한 후, 이 식을 납 차폐 두께 계산식에 대입하여 도어에서 차폐 두께 계산식을 유도하였다. 유도된 직접차폐식 도어의 차폐 두께 계산식으로부터 계산된 납 차폐 두께는 NCRP 및 IAEA 2차 방벽 차폐 두께 계산 방법으로 산출된 두께보다 약 6% 낮았다. 이 결과는 NCRP 및 IAEA 2차 방벽 차폐 두께 계산 방법으로부터 두께 계산이 더 보수적이고 2차 빔 차폐에 잘 맞는다는 의미로 해석된다. 결론적으로, 이 연구에서 유도된 직접차폐식 도어의 납 차폐 두께 계산식은 도어의 차폐 설계에 유용하게 사용될 수 있을 것으로 사료된다.

• 한국임상보건과학회지
• /
• 제1권2호
• /
• pp.31-37
• /
• 2013

Purpose. This study was to investigate the analysis of the central corneal thickness and anterior chamber depth of eyes in Korean Young Population using the Pentacam topography. Methods. The subjects consisted of 126 eyes from normal cornea of Korean aged 7-12($8.857{\pm}1.501$) years during 2009. The thinnest location, pachy apex, and pupil central region of the cornea thickness was measured using the Pentacam pachymetry. The anterior chamber depth of normal corneas was measured with Pentacam. Results. The thinnest location of corneal thickness was $547.413{\pm}37.893$um. The pachy apex of cornea thickness was $552.103{\pm}36.016$um. Also, the pupil center of corneal thickness was measured $552.143{\pm}36.418$um. On the other hand, the mean thickness in the central cornea was a statically significant relationship(t-test, p=0.0002) between pachy apex and thinnest zone. Also the mean thickness of the central cornea was a statically significant correlation(pearson p=0.0001) among the pupil center, pachy apex and thinnest zone. The anterior chamber depth was $3.137{\pm}0.308$mm. The mean depth in the anterior chamber of cornea was a statically relationship(t-test, p>0.05) between OD and OS. Conclusions. The results of this clinical study suggested that the analysis of the central corneal thickness and anterior chamber depth using Pentacam in Korean young population can provide the useful morphological information in diagnosis of cornea for the contact lens fitting and corneal refraction surgery.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.181-184
• /
• 2001

Chemical Mechanical Polishing(CMP) of Shallow Trench Isolation(STD structure in 0.18 m semiconductor device fabrication is studied. CMP process is applied for the STI structure with and without reverse moat pattern and End Point Detection (EPD) method is tested. To optimize the transistor properties related metal 1 parameters. we studied the correlation between CMP thickness of STI using high selectivity slurry. DOE of gate etch recipe, and 1st metal DC values. Remaining thickness of STI CMP is proportional to the thickness of gate-etch process and this can affect to gate profile. As CMP thickness increased. the N-poly foot is deteriorated. and the P-Poly Noth is getting better. If CD (Critical Dimension) value is fixed at some point,, all IDSN/P values are in inverse proportional to CMP thickness by reason of so called Profile Effect. Weve found out this phenomenon in all around DOE conditions of Gate etch process and we also could understand that it would not have any correlation effects between VT and CMP thickness in the range of POE 120 sec conditions. As CMP thickness increased by $100\AA$. 3.2 $u\AA$ of IDSN is getting better in base 1 condition. In POE 50% condition. 1.7 $u\AA$ is improved. and 0.7 $u\AA$ is improved in step 2 condition. Wed like to set the control target of CD (critical dimension) in gate etch process which can affect Idsat, VT property versus STI topology decided by CMP thickness. We also would like to decide optimized thickness target of STI CMP throughout property comparison between conventional STI CMP with reverse moat process and newly introduced STI CMP using high selectivity slurry. And we studied the process conditions to reduce Gate Profile Skew of which source known as STI topology by evaluation of gate etch recipe versus STI CMP thickness.

• The Korean Journal of Physiology
• /
• 제3권1호
• /
• pp.29-32
• /
• 1969

Skinfold thickness measurement and total body fat calculation were made in summer (July) and winter (December or January) On 70 medical students (age: 20 yr),8 national team basketball players (age: 20 yr), and 9 middle-age men. Skinfold thickness measurements were made on 4 sites, namely, back, arm, waist and abdomen. The mean skinfold thickness (mm) of the 4 sites was substituted into the following formulae. For adult of 20 years old: % Fat=0.911x+8.1, and for middle-aged men % Fat=1.199x+1.41. In young medical students and ball players body weight decreased, mean skinfold thickness increased in winter season. As a result total body fat .(% body weight) increased in winter In middle-aged men both body weight and mean skinfold thickness increased in winter and resulted in an increase in the total body fat. The detailed data are as follows: 1. In medical students summer: winter values were: body weight, 59.7 :58.9 kg; mean skinfold thickness, 7.85 : 8.12 mm; and total body fat, 15.0 : 15.5% body weight (P<.30). 2. In national team basketball players summer: winter values were: body weight, 73.5 : 69.1 kg; mean skinfold thickness, 7.2 : 7.5 mm; total body fat, 11.6 : 12.1% (P:NS). 3. In middle-aged men summer vs winter values were: body weight, 61.5 : 63.0 kg; mean skinfold thickness, 10.3 : 11.8 mm; total body fat, 17.2 : 18.0% (P:NS). 4. Skinfold thickness on back showed no seasonal variation and on abdomen the thickness increased in winter. 5. It was concluded that the predominant factor in increasing total body fat in winter is the decrease in body exercise in the winter time.

• Imaging Science in Dentistry
• /
• 제48권3호
• /
• pp.213-221
• /
• 2018

Purpose: The purpose of this study was to evaluate the relationship between masseter muscle thickness, facial morphology, and mandibular morphology in Korean adults using ultrasonography. Materials and Methods: Ultrasonography was used to measure the masseter muscle thickness bilaterally of 40 adults(20 males, 20 females) and was performed in the relaxed and contracted states. Facial photos and panoramic radiography were used for morphological analyses and evaluated for correlations with masseter muscle thickness. We also evaluated the correlations of age, body weight, stature, and body constitution with masseter muscle thickness. Results: In the relaxing, the masseter was $9.8{\pm}1.3mm$ in females and $11.3{\pm}1.2mm$ in males. In the contracted state, it was $12.4{\pm}1.4mm$ in females and $14.7{\pm}1.4mm$ in males. Facial photography showed that bizygomatic facial width over facial height was correlated with masseter muscle thickness in both sexes in the relaxed state, and was statistically significantly correlated with masseter muscle thickness in males in the contracted state. In panoramic radiography, correlations were found between anterior angle length and posterior angle length and masseter muscle thickness in females, and between body length and posterior angle length, between anterior angle length and body length, between ramal length and body length, and between body length and condyle length in males. Conclusion: Masseter muscle thickness was associated with facial and mandibular morphology in both sexes, and with age in males. Ultrasonography can be used effectively to measure masseter muscle thickness.

• Imaging Science in Dentistry
• /
• 제31권2호
• /
• pp.85-91
• /
• 2001

Purpose: To evaluate the effect of the slice thickness and the size of region of interest (ROI) on CT number using quantitative CT phantom Materials and Methods: The phantom containing 150 mg/cc, 75 mg/cc and 0 mg/cc calcium hydroxyapatite was scanned with 1, 3, 5 and 10 mm slice thicknesses by single energy quantitative computed tomography (QCT). CT numbers were measured on center position of the phantom. Shape of ROI was circular and sizes were 1, 3, 5, 11, 16, 21, 26 and 33 mm². ANOVA and Tukey's multiple comparison method were performed for statistical comparison of CT numbers according to different slice thicknesses. Coefficient of variation of CT number measured in each size of ROI was evaluated in same slice thickness. Results : CT numbers had statistically significant difference according to slice thicknesses (p<0.05). As the slice thickness increased, CT number also increased. As the density of phantom became lower and the size of ROI became smaller, the coefficient of variation of CT number increased. When the size of ROI was more than 11 mm² in 1 mm slice thickness, 5 mm² in 3 mm slice thickness and 3 mm² in 5 mm slice thickness, the coefficient of variation became consistent. In 10 mm slice thickness, the size of ROI had little effect on the coefficient of variation. Conclusion: CT number had variation according to the slice thickness and the size of ROI although the object was homogeneous. The slice thickness and the size of ROI are critical factors in precision of the CT number measurements.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.181-184
• /
• 2001

Chemical Mechanical Polishing(CMP) of Shallow Trench Isolation(STI) structure in 0.18 m semiconductor device fabrication is studied. CMP process is applied for the STI structure with and without reverse moat pattern and End Point Detection (EPD) method is tested. To optimize the transistor properties related metal 1 parameters, we studied the correlation between CMP thickness of STI using high selectivity slurry, DOE of gate etch recipe, and 1st metal DC values. Remaining thickness of STI CMP is proportional to the thickness of gate-etch process and this can affect to gate profile. As CMP thickness increased, the N-poly foot is deteriorated, and the P-Poly Noth is getting better. If CD (Critical Dimension) value is fixed at some point, all IDSN/P values are in inverse proportional to CMP thickness by reason of so called Profile Effect. Weve found out this phenomenon in all around DOE conditions of Gate etch process and we also could understand that it would not have any correlation effects between VT and CMP thickness in the range of POE 120 sec conditions. As CMP thickness increased by 100 ${\AA}$, 3.2 u${\AA}$ of IDSN is getting better in base 1 condition. In POE 50% condition, 1.7 u${\AA}$ is improved, and 0.7 u${\AA}$ is improved in step 2 condition. Wed like to set the control target of CD (critical dimension) in gate etch process which can affect Idsat, VT property versus STI topology decided by CMP thickness. We also would like to decide optimized thickness target of STI CMP throughout property comparison between conventional STI CMP with reverse moat process and newly introduced STI CMP using high selectivity slurry. And we studied the process conditions to reduce Gate Profile Skew of which source known as STI topology by evaluation of gate etch recipe versus STI CMP thickness.

• 대한기계학회논문집A
• /
• 제36권9호
• /
• pp.961-970
• /
• 2012

두께가 다른 이종강도 배관 용접부에서 인장, 내압 및 굽힘응력에 대한 하중지지능력을 평가하였다. 1.22, 1.54 및 1.89의 두께비를 갖는 API X65-API X80, API X42-API X65 및 API X42-API X80 배관 용접부를 유한요소해석을 통하여 하중지지능력을 평가하였다. 이종강도 배관의 두께비가 1.5 이하에서 인장강도와 최대모멘트는 면삭각도 변화에 큰 영향을 받지 않으나 두께비가 1.5 이상에서는 큰 영향을 받는다. 저강도 배관의 길이방향 면삭각도와 두께비 변화에 따라서는 내압에 의한 파열압력은 영향을 받지 않는다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.281-281
• /
• 2015

Shallow landslide often occurs in areas of this topography where subsurface soil water flow paths give rise to excess pore-water pressures downslope. Recent hillslope hydrology studies have shown that subsurface topography has a strong impact in controlling the connectivity of saturated areas at the soil-bedrock interface. In this study, the physically based SHALSTAB model was used to evaluate the effects of three soil thicknesses (i.e. average soil layer, soil thickness to weathered soil and soil thickness to bedrock soil layer) and subsurface flow reflecting three soil thicknesses on shallow landslide prediction accuracy. Three digital elevation models (DEMs; i.e. ground surface, weathered surface and bedrock surface) and three soil thicknesses (average soil thickness, soil thickness to weathered rock and soil thickness to bedrock) at a small hillslope site in Jinbu, Kangwon Prefecture, eastern part of the Korean Peninsula, were considered. Each prediction result simulated with the SHALSTAB model was evaluated by receiver operating characteristic (ROC) analysis for modelling accuracy. The results of the ROC analysis for shallow landslide prediction using the ground surface DEM (GSTO), the weathered surface DEM and the bedrock surface DEM (BSTO) indicated that the prediction accuracy was higher using flow accumulation by the BSTO and weathered soil thickness compared to results. These results imply that 1) the effect of subsurface flow by BSTO on shallow landslide prediction especially could be larger than the effects of topography by GSTO, and 2) the effect of weathered soil thickness could be larger than the effects of average soil thickness and bedrock soil thickness on shallow landslide prediction. Therefore, we suggest that using BSTO dem and weathered soil layer can improve the accuracy of shallow landslide prediction, which should contribute to more accurately predicting shallow landslides.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.236-243
• /
• 2014

Surface profiling and film thickness measurement play an important role for inspection. White light interferometry is widely used for engineering surfaces profiling, but its applications are limited primarily to opaque surfaces with relatively simple optical reflection behavior. The conventional bucket algorithm had given inaccurate surface profiles because of the phase error that occurs when a thin-film exists on the top of the surface. Recently, reflectometry and white light scanning interferometry were combined to measure the film thickness and surface profile. These techniques, however, have found that many local minima exist, so it is necessary to make proper initial guesses to reach the global minimum quickly. In this paper we propose combing reflectometry and white light scanning interferometry to measure the thin-film thickness and surface profile. The key idea is to divide the measurement into two states; reflectometry mode and interferometry mode to obtain the thickness and profile separately. Interferogram modeling, which considers transparent thin-film, was proposed to determine parameters such as height and thickness. With the proposed method, the ambiguity in determining the thickness and the surface has been eliminated. Standard thickness specimens were measured using the proposed method. Multi-layered film measurement results were compared with AFM measurement results. The comparison showed that surface profile and thin-film thickness can be measured successfully through the proposed method.