• Elastomers and Composites
• /
• 제58권2호
• /
• pp.81-86
• /
• 2023

Asphalt pavements are generally composed of fine and coarse aggregates, bitumen, and modifier. Asphalt pavement wear particles (APWPs) are produced by friction between the road surface and the tire tread, and they flow into the environment such as rivers and oceans. Model APWPs were prepared and a single APWP of 212-500 (S-APWP) and 500-1000 ㎛ (L-APWP) was analyzed using thermogravimetric analysis (TGA) to investigate inhomogeneity in the compositions of the APWPs. The reference TGA thermogram was built using thermograms of the raw materials and formulation of the model asphalt pavement. The compositions of the APWPs were different from each other. Ash contents of the APWPs were lower than expected. Inhomogeneity in the total contents of bitumen and modifier was more severe than that in the other components. The inhomogeneity of the S-APWPs was more severe than that of the L-APWPs.

• 한국포장학회지
• /
• 제8권2호
• /
• pp.18-26
• /
• 2002

Films of methylcellulose(MC), chitosan and their blends were prepared using water and acid solution as a solvent. The transition behavior and miscibility of polymers and their blends were characterized by dynamic mechanical analysis(DMA) and thermogravimetric analysis(TGA). The DMA analysis of PEG400/MC blends has shown that PEG400 was compatible with MC and was effective plasticizer since the curves of $tan{\delta}$ against temperature exhibited single peak, corresponding to single glass transition temperature, which were displaced to lower values with increasing PEG400 content. Results of DMA analysis and TGA analysis of MC/chitosan blends indicate that there are some miscibility between MC and chitosan in the blends, attributed to the similarities between two polysaccharides and interactions of two polymers in the blends. The inclusion of PEG400 in the blends increase the miscibility between two components in the blends.

• 한국화재소방학회논문지
• /
• 제33권1호
• /
• pp.1-6
• /
• 2019

열중량 분석법(TGA)을 이용하여 소방용 합성수지 배관으로 사용되는 CPVC의 활성화 에너지를 측정하였다. 열중량 분석법을 이용한 활성화 에너지는 Kissinger method와 Flynn-Wall-Ozawa method를 이용하여 계산하였다. 활성화 에너지를 계산한 결과 Kissinger method에 의해 128.07 kJ/mol, Flynn-Wall-Ozawa method에 의해 145.60 kJ/mol로 나타났다. Kissinger method와 Flynn-Wall-Ozawa method에 의해 계산된 활성화 에너지의 차이는 해석 방법이 다르다는 점을 감안했을 때 큰 차이가 없다고 판단된다. 향후 가속열화을 이용한 열적 열화평가 및 공기오븐노화시험을 통한 CPVC의 연소특성을 시험하고, 수명을 예측하고자 한다.

• 대한안전경영과학회지
• /
• 제10권4호
• /
• pp.111-120
• /
• 2008

The combustion reaction of polypropylene was investigated using a thermogravimetric technique under an air atmosphere condition at several heating rates from 10 to $50^{\circ}C/min$. To obtain information on the kinetic parameters, the dynamic thermogravimetric analysis curve and its derivative were analyzed by a variety of analytical methods such as Kissinger, Friedman, Freeman-Carroll, Chatterjee-Conrad, Ozawa and Coats-Redfern methods. The comparative works for the kinetic results obtained from various methods should be performed to determine the kinetic parameters, because there are tremendous differences in the calculated kinetic parameters depending upon the mathematical method taken in the analysis.

• Elastomers and Composites
• /
• 제51권3호
• /
• pp.206-211
• /
• 2016

Experimental error sources for thermogravimetric analysis (TGA) of poly(ethylene-co-vinyl acetate) (EVA) were investigated and sample preparation method to reduce the experimental error was suggested. Maximum dissociation temperatures of EVA for the first and second dissociation reactions ($T_{m1}$ and $T_{m2}$, respectively) were measured. By decreasing the weight of raw EVA, the $T_{m1}$ increased but the the $T_{m2}$ decreased. When weight of the raw EVA was over 10 mg, the TGA curve showed abnormal behaviors. The abnormal TG behaviors were explained by gathering and instantaneous evaporation of acetic acid formed by deacetylation of the VA unit. When TGA analysis of EVA was performed using untreated (raw) EVA, the experimental errors were about 1%. In order to eliminate the abnormal TG behaviors and to reduce the experimental errors, EVA film made by solvent casting was used. For the treated EVA (EVA film), the abnormal TG behaviors did not appear, the $T_{m1}$ decreased by about $2^{\circ}C$ but the $T_{m2}$ increased by about $6^{\circ}C$, and the experimental errors were reduced by 0.5%.

• Elastomers and Composites
• /
• 제50권1호
• /
• pp.18-23
• /
• 2015

Vinyl acetate (VA) contents of poly(ethylene-co-vinyl acetate) (EVA) analyzed by infrared spectroscopy (IR), nuclear magnetic spectroscopy (NMR), and thermogravimetric analysis (TGA) were compared. Four grade EVAs supplied by Aldrich Co. and four grade EVAs manufactured by DuPont Co. were used. For IR analysis, VA contents were determined using calibration curve (absorbance ratio of $1739cm^{-1}/2922cm^{-1}$ or $609cm^{-1}/1464cm^{-1}$) of reference EVAs. Correlation coefficients of the calibration curves were not sufficiently high ($r^2{\leq}0.96$). For NMR analysis, VA contents were determined using peaks of $CH_3$, $CH_2$, and CH. VA contents determined by NMR analysis were less than those marked by suppliers more than 10%. For TGA, VA contents were determined using weight loss through deacetylation. VA contents determined by TGA were slightly different with those marked by suppliers. Difference in the VA contents determined by different analytical methods was discussed, and difference in the analytical results according to the EVA suppliers was also examined.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.156-159
• /
• 2006

Gasification and melting method is one of the most potential means for waste treatment process with low emission of fly ash or heavy metal, dioxin and high possibility of using slags as resources. Moisture contents influences directly a gasification characteristics of waste. So it is necessary to investigate the effect of moisture contents in gasification. But it is hard to consider the effect of moisture contents, using samples of powder form of Milligram's order in existing thermogravimetric analyser. Therefore, we made a thermogravimetric analysis device to applicate samples of Gram's order. Gasification characteristics are typically reported with result from thermogravimetric analysis date for wood and RDF samples along with changing moisture contents. It is discussed the way to apply these analysis results to gasification and melting furnace.

• Journal of the Korean Wood Science and Technology
• /
• 제29권3호
• /
• pp.59-67
• /
• 2001

Rice husk flours were analyzed by chemical composition and thermogravimetric methods in nitrogen atmosphere to discuss its feasibility as a raw material for manufacturing agricultural lignocellulosic fiber-thermoplastic polymer composite. It was revealed in the chemical composition analysis that rice husk flour was composed of moisture, 5.0%; lignin, 21.6%; holocellulose, 60.8%; ash, 12.6%. In the thermogravimetric analysis (TGA), thermal decomposition behavior of rice husk flour from room temperature to $350^{\circ}C$ was similar to that of wood flour, but rice husk flour was more thermally stable from 350 to $800^{\circ}C$ than wood flour because of higher silica content in the rice husk flour and smaller particle size of rice husk flour. The activation energy of thermal decomposition was evaluated using Flynn & Wall expression. As the thermal decomposition proceeded in rice husk flour, the activation energy of thermal decomposition appeared almost constant up to ${\alpha}=0.25$, but thereafter increased. Activation energy of thermal decomposition in wood flour, however, decreased steeply up to ${\alpha}=0.3$, but thereafter remained almost constant. From the results, rice husk flour was thought be a substitute for wood flour in manufacturing agricultural lignocellulosic fiber-thermoplastic polymer composite in the aspect of thermal decomposition.

• Journal of the Korean Wood Science and Technology
• /
• 제45권5호
• /
• pp.572-579
• /
• 2017

WPC 내 목질섬유 함량 분석은 신뢰도 높은 목재 플라스틱 복합재(WPC) 소비시장 형성을 위해 상당히 중요하다. 본 연구에서는 polypropylene과 목질섬유를 복합화한 단순 WPC 배합 조건에서 WPC 내 목질섬유 함량에 대한 분석을 TGA를 이용한 열분석 방법과 AMS를 이용한 바이오 탄소 함량 분석 방법을 통해 진행하였다. TGA를 통한 열분해 분석법은 $5^{\circ}C/min$의 승온속도로 고분자 PP의 최대 미분 온도를 이용하여 신뢰도 높은 WPC 내 목질섬유 함량에 관한 검량선을 얻을 수 있었다. TGA와 AMS의 분석 방법 비교에 있어서는, 바이오 탄소 함량을 이용하는 AMS 분석법이 더 높은 신뢰성을 보여주었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.22-25
• /
• 2005

열용량분석기(TGA)를 사용하여 고온에서의 탄소/페놀릭 복합재료의 열분해를 연구하였다. 온도상승 속도는 5, 10, 15, 30 그리고 $50^{\circ}C/min$ 이었으며 온도 상승속도가 증가할수록 최대 열분해 반응의 온도도 상승하였다. 열분해반응에서 얻어진 자료를 근간으로 물리-수학적인 모델을 제시하였으며 모델의 실효성을 판단하기 위하여 고체 추진기관 노즐의 연소시험을 통하여 내부 온도 분포 및 밀도 분포 자료를 해석 모델과 비교하였다. 향후 연구를 통하여 이러한 열분해 인자는 고체 추진기관의 열 및 구조 해석의 입력 자료로 활용이 될 것이다.