• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.95-95
• /
• 2014

An OLED(Organic Light-Emitting Diode) device based on the emissive electroluminescent layer a film of organic materials. OLED is used for many electronic devices such as TV, mobile phones, handheld games consoles. ULVAC's mass production systems are indispensable to the manufacturing of OLED device. ULVAC is a manufacturer and worldwide supplier of equipment and vacuum systems for the OLED, LCD, Semiconductor, Electronics, Optical device and related high technology industries. The SMD Series are single-substrate sputtering systems for deposition of films such as metal films and TCO (Transparent Conductive Oxide) films. ULVAC has delivered a large number of these systems not only Organic Evaporating systems but also LTPS CVD systems. The most important technology of thin-film encapsulation (TFE) is preventing moisture($H_2O$) and oxygen permeation into flexible OLED devices. As a polymer substrate does not offer the same barrier performance as glass substrate, the TFE should be developed on both the bottom and top side of the device layers for sufficient lifetimes. This report provides a review of promising thin-film barrier technologies as well as the WVTR(Water Vapor Transmission Rate) properties. Multilayer thin-film deposition technology of organic and inorganic layer is very effective method for increasing barrier performance of OLED device. Gases and water in the organic evaporating system is having a strong influence as impurities to OLED device. CRYO pump is one of the very useful vacuum components to reduce above impurities. There for CRYO pump is faster than conventional TMP exhaust velocity of gases and water. So, we suggest new method to make a good vacuum condition which is CRYO Trap addition on OLED evaporator. Alignment accuracy is one of the key technologies to perform high resolution OLED device. In order to reduce vibration characteristic of CRYO pump, ULVAC has developed low vibration CRYO pumps to achieve high resolution alignment performance between Metal mask and substrate. This report also includes ULVAC's approach for these issues.

• Journal of the Korean Chemical Society
• /
• v.40 no.5
• /
• pp.327-332
• /
• 1996

The rates of solvolylsis of methyl chloroformate, phenyl chloroformate and 1-adamantyl derivatives in binary solvent mixtures have been measured by conductometric method at various temperatures and pressures. The activation parameters were estimated from the rate constants. The activation volume (${\Delta}V_o^{\neq}$) and the activation entropy (${\Delta}S^{\neq}$) are both negative, but the activation enthalpy (${\Delta}H^{\neq}$) is positive. This behavior is discussed in terms of electrostriction of solvation. The reactivities of these reactions were also estimated from the correlation of the activation volumes with the activation entropies. From these results, it could be estimated that the solvolyses of 1-adamantyl fluoroformate (in aqueous TFE) and 1-adamantyl tosylate have pathway involving unimolecular reaction, while the reaction of methyl chloroformate, phenyl chloroformate and 1-adamantyl fluoroformate (in aqueous alcohol) proceed through a bimolecular reaction.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.10
• /
• pp.1478-1484
• /
• 2003

CRAMP was identified from a cDNA clone derived from a mouse femoral marrow cells as a member of cathelicidin-derived antimicrobial peptide. Tertiary structure of CRAMP in TFE/$H_2O$ (1 : 1, v/v) solution has been determined by NMR spectroscopy previously and consists of two amphipathic $\alpha-helices$ from Leu4 to Lys10 and from Gly16 to Leu33. These two helices are connected by a flexible region from Gly11 to Gly16. Analysis of series of fragments composed of various portion of CRAMP revealed that an 18-residue fragment with the sequence from Gly16 to Leu33 (CRAMP-18) was found to retain antibacterial activity without cytotoxicity. The effects of two Phe residues at positions 14 and 15 of CRAMP-18 on structure, antibacterial activity, and interaction with lipid membranes were investigated by $Phe^{14,15}$ ${\rightarrow}$ Ala substitution (CRAMP-18-A) in the present study. Substitution of Phe with Ala in CRAMP-18 caused a significant reduction on antibacterial and membrane-disrupting activities. Tertiary structures of CRAMP-18 in 50% TFE/$H_2O$ (1 : 1, v : v) solution shows amphipathic ${\alpha}$-helix, from $Glu^2{\;}to{\;}Leu^{18}$, while CRAMP-18-A has relatively short amphipathic ${\alpha}$-helix from $Leu^4{\;}to{\;}Ala^{15}$. These results suggest that the hydrophobic property of $Phe^{14}{\;}and{\;}Phe^15$ in CRAMP-18 is essential for its antibacterial activity, ${\alpha}$-helical structure, and interactions with phospholipid membranes.

• Journal of the Korean Chemical Society
• /
• v.23 no.1
• /
• pp.7-14
• /
• 1979

Changes in CD, ORD and uv-spectra during the mutarotation of poly(trans-5-methyl-L-proline) (PTMP) were studied. The forward mutarotion of PTMP occurred in strong organic acids and trifluoroethanol, while the reverse mutarotation was observed by dilution of the trifluoroethanol solution with excess aliphatic alcohols. The changes in CD, ORD and uv-spectra during the forward and reverse mutarotation proceeded paralell to those found for the mutarotation of polyproline. The chemical shift of the ${\alpha}CH-$proton was shifted downfield about 0.3 ppm during the forward mutarotation. The reduced viscosity for the forward mutarotation increased from 0.15 to 0.26 (dl/g) during 5 days. The equilibrium between form I and form II was estabilished in an appropriate solvent mixture. All changes in solution properties mentioned above are similar to those found for polypoline. These results support that the two forms of PTMP are the same conformations as polyproline form I and form II, i. e., a right-handed helix with all cis amide bonds and a lefthanded helix with all trans amide bonds.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.409-414
• /
• 2008

The fabrication of gelatin nanofibers by electro spinning has been examined using the TFE/DW co-solvent system. It has been found that no beads-on-string structure was formed for the solution containing ionic salts. The resulting fibers exhibited a uniform diameter ranging from 110 to 125 nm. As the concentration of ionic salts increases, the beads become smaller and more spindle like, due to the increase of viscosity and conductivity. The addition of ionic salts induces a higher charge density on the surface of ejected jet during spinning, leading that higher elongation forces are applied to the jet. The higher enhancement of viscosity and conductivity was observed in gelatin solutions by the use of divalent salt. However, the concentration of ionic salts scarcely affected the variation of fiber diameter. While very low crystallinity was observed from XRD pattern for the sample containing no ionic salt, which increased with increasing the concentration of ionic salts.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.67-70
• /
• 2022

In order to prevent water vapor and oxygen permeation in the organic light emitting diodes (OLED), Al₂O₃ thin-film encapsulation (TFE) technology were investigated. Atomic layer deposition (ALD) method was used for making the Al₂O₃ TFE layer because it has superior barrier performance with advantages of excellent uniformity over large scales at relatively low deposition temperatures. In this study, the thickness of the Al₂O₃ layer was varied by controlling the numbers of the unit pulse cycle including Tri Methyl Aluminum(Al(CH₃)₃) injection, Ar purge, and H₂O injection. In this case, several process parameters such as injection pulse times, Ar flow rate, precursor temperature, and substrate temperatures were fixed for analysis of the effect only on the thickness of the Al₂O₃ layer. As results, at least the thickness of 39 nm was required in order to obtain the minimum WVTR of 9.04 mg/m²day per one Al₂O₃ layer and a good transmittance of 90.94 % at 550 nm wavelength.

• Journal of the Korean Magnetic Resonance Society
• /
• v.4 no.1
• /
• pp.41-49
• /
• 2000

To design more efficient peptide antagonist against the HBV, preSl(21-47) which carries the HBV receptor binding site for hepatocytes was synthesized and the solution structure of preSl(21-47) was investigated using CD spectroscopy and NMR spectroscopy in membrane-mimicking environments. According to CD spectra, preSl(21-47) has a random structure in aqueous solution, while conformational change was induced by addition of TFE and SDS micelle. Tertiary structures as determined by NMR spectroscopy shows that preSl(21-47) has a very flexible structure even in SDS micelle.

• Journal of the Korean Society of Safety
• /
• v.13 no.4
• /
• pp.172-179
• /
• 1998

The effects of $^{60}Co\;{\gamma}-Ray$ irradiation on TSC characteristics of TFE type polytetrafluoroethylene(PTFE) were investigated. The $\alpha$ peak on TSC curve of PTFE was decreased, while the $\beta$ peak was reversely increased by the increasing of $\gamma$-irradiation doses up to 80 krad(0.8 kGy). Moreover, $\alpha$ and $\beta$ peaks on TSC curve of the irradiated PTFE are changed with the increasing of the forming temperature and forming electric field. In annealing the irradiated PTFE specimens at room temperature in air, it was shown a continuous recovery of TSC characteristics with time, which is assumed the traped charge carriers are liberated from the shallow traps and undergoes a recombination process during room temperature decay.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.2
• /
• pp.113-117
• /
• 2016

Temperature dependent reverse-bias current-voltage (I-V) characteristics in Cu Schottky contacts to oxygen plasma treated n-InP were investigated. For untreated sample, current transport mechanisms at low and high temperatures were explained by thermionic emission (TE) and TE combined with barrier lowering, respectively. For plasma treated sample, experimental I-V data were explained by TE or TE combined with barrier lowering models at low and high temperatures. However, the current transport was explained by a thermionic field emission (TFE) model at intermediate temperatures. From X-ray photoemission spectroscopy (XPS) measurements, phosphorus vacancies (VP) were suggested to be generated after oxygen plasma treatment. V_P possibly involves defects contributing to the current transport at intermediate temperatures. Therefore, minimizing the generation of these defects after oxygen plasma treatment is required to reduce the reverse-bias leakage current.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.5
• /
• pp.285-289
• /
• 2015

We prepared silver Schottky contacts to O-polar and nonpolar m-plane bulk ZnO wafers. Then, by considering various transport models, we performed a comparative analysis of the current transport properties of Ag/bulk ZnO Schottky diodes, which were measured at 300, 200, and 100 K. The fitting of the forward bias current-voltage (I-V) characteristics revealed that the tunneling current is dominant as the transport component in both the samples. Compared to thermionic emission (TE), a stronger contribution of tunneling current was observed at low temperature. The reverse bias I-V characteristics were well fitted with the thermionic field emission (TFE) in both the samples. The presence of acceptor-like adsorbates, such as O₂ and H₂O, modulated the surface conductive state of ZnO, thereby affecting the tunneling effect. The degree of activation/passivation of acceptor-like adsorbates might be different in both the samples owing to their different surface morphologies and surface defects (e.g., oxygen vacancies).