• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.90-92
• /
• 2003

Effects of organic additives on YBCO coated conductor prepared by MOD-TFA method were investigated. YBCO thin films were deposited on (100)-oriented single crystalline LaAlO$_3$substrates by conventional MOD-TFA process. The microstructures of YBCO thin films show labyrinth-like patterns. The origin of this microstructure was delineated by compositional inhomogeneity during the pyrolysis process of MOD process and it was shown that organic additives changes the microstructure and texture development of grown YBCO films

• Progress in Superconductivity
• /
• v.5 no.1
• /
• pp.80-83
• /
• 2003

Superconducting YBCO thin films are fabricated on single-crystalline substrates by Metallo-organic Depostion process employing Trifluoroacetic acid as a chelating agent (MOD-TFA). (100)-oriented single crystalline LaAlO$_3$ substrates were employed to grow superconducting film with high crystallinity. The fully processed YBCO thin films were characterized with XRD, SEM, EDS, etc. The microstructures of YBCO thin films show labyrinth-like patterns. The origin of this microstructure was delineated by compositional inhomogeneity during the MOD process and it was shown that the microstructure may be modified by additives. In this work, effects of additives on the microstructures and electrical properties of YBCO thin films have been investigated.

• Progress in Superconductivity and Cryogenics
• /
• v.10 no.1
• /
• pp.1-5
• /
• 2008

The effect of $BaCeO_3$ doping on the critical current density of YBCO film by TFA-MOD method was studied. $BaCeO_3$ doping was made by two method; one is direct addition of $BaCeO_3$ nano-sized powder prepared by citrate process followed by grinding with planetary ball mill for 10 hours. Another is addition of Ba-Ce precursor solution prepared with Ba-acetate and Ce acetate dissolved in TFA to the YBCO-TFA precursor solution. The film was made by standard dip coating and heat treatment process with conversion temperature of $790^{\circ}C$ in 1000 ppm oxygen containing moisturized Ar gas atmosphere. The direct addition of $BaCeO_3$ powder resulted in YBCO film with good epitaxial growth and no evidence of second phase formation. The addition through precursor solution resulted in the increase of critical current density upto 30 at% doping and uniform dispersion of $BaCeO_3$ fine inclusion was confirmed by SEM-EDX.

• Progress in Superconductivity
• /
• v.5 no.1
• /
• pp.84-87
• /
• 2003

$YBa_2$$Cu_3$$O_{7-x}$ (YBCO) thin films were fabricated by MOD-TFA process via dip-coating method on LaAlO$_3$, (LAO) single crystalline substrates. In this study, we investigated effect of annealing temperature and solvent on the microstructure and texture of YBCO thin films. The precursor films were annealed at various temperature to improve surface morphologies and phase purities. It was shown that the films annealed at relatively lower and higher temperature exhibit low phase purity and crystallinity. The effect of various solvents on surface morphologies and second phase has been investigated.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.87-89
• /
• 2003

YBa$_2$Cu$_3$$O_{7-x}$ thin films were fabricated by MOD-TFA process via dipping method on LaAlO$_3$(LAO) single crystalline substrates. In this study, we investigated effect of solvent on the microstructure and crystallinity of YBCO thin films. The YBCO films derived from solvent with low boiling point has good surface morphologies.s.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.1
• /
• pp.12-17
• /
• 2004

High critical current density. $J_c$ over $1MA/cm^2$ at 77 K in a self field was successfully achieved from the YBCO film prepared on (100) $SrTiO_3$ single-crystal substrates by the TFA-MOD process. Unlike a normal TFA-MOD process, we prepared the TFA precursor solution by dissolving YBCO powder into the trifluoroacetic acid. A significant amount of the second phases, including $BaF_2$, was observed in the films fired at $700-725^{\circ}C$ for 2 h under $P(O_2)=10^{-3}$ atm and $P(H_2O)=4.2%$, most probably due to an insufficient reaction time, and hence $T_c$ was greatly degraded. However the films fired at $750-800^{\circ}C$ for 2 h were composed of strongly c-axis oriented YBCO grams without any second phases. and exhibited the $T_c$ values of 89.5 ~ 91 K with a sharp transition. With increasing the firing temperature from 750 to $800^{\circ}C$ average grain size of YBCO was increased and grain connectivity was enhanced. The highest $J_c$ value of $1.1MA/cm^2$ was obtained from the YBCO film fired at $800^{\circ}C$.

• Progress in Superconductivity
• /
• v.7 no.1
• /
• pp.77-82
• /
• 2005

We report a successful fabrication of high-quality $SmBa_{2}Cu_{3}O_{7-{\delta}}$ (SmBCO) thin films on $LaAlO_3$(LAO)(100) single crystalline substrates by a modified TFA-MOD method. After the pyrolysis heat treatment of spin-coated films up to $400^{\circ}C$, SmBCO films were fired at various temperatures ranging from 810 to $850^{\circ}C$ in a reduced oxygen atmosphere (10 ppm $O_2$ in Ar). Optimally processed SmBCO films exhibited the zero-resistance temperature ($T_{c,zero}$) of 90.2 K and the critical current density ($J_c$) of $0.8\;MA/cm^2$ at 77K in self-field. Compared with the $J_c$ values (normally, > $2\;MA/cm^2$ at 77 K) of MOD-TFA processed YBCO films, rather depressed $J_c$ values in SmBCO films are most probably attributed to the existence of ${\alpha}$-axis oriented grains.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.12a
• /
• pp.33-34
• /
• 2006

The effects of Ba and Ce addition has been investigated in YBCO prepared by trifluoroacetate (TFA) metalorganic depostition (MOD) method. Precursor solutions with cation ratios of Y:Ba:Cu:Ce = 1:2+x:3:x (x = 0, 0.05, 0.1 and 1.5) have been prepared by adding an excess amount of cerium and barium. Coated film was calcined at lower temperature and conversion heat treatment at temperature of $780{\sim}810^{\circ}C$. It has been shown that the critical current (Ic) of YBCO film was degraded by doping of Ba and Ce atoms. But Ic was increased as the amount of doped Ba and Ce content increased from 5 % to 15 %. It was observed that there was little increase of a flux pinning force with Ba and Ce addition in YBCO film prepared by TFA-MOD process.

• Progress in Superconductivity
• /
• v.7 no.1
• /
• pp.87-91
• /
• 2005

[ $YBa_{2}Cu_{3}O_{7-x}$ ] thin films were fabricated on $LaAlO_3$(100) substrate by TFA-MOD process. Yttrium-excess (0, 2.5, 5, 10, 15, 20 $at\%$) coating solution was prepared by adding extra amount of yttrium into a stoichiometric(Y:Ba:Cu=1:2:3) TFA precursor solution. Results are presented concerning the influence of excess yttrium additions on the microstructure development and superconducting properties of $YBa_{2}Cu_{3}O_{7-x}$ film. Large sized CuO particles was observed by SEM EDS investigation. The addition of excess yttrium affected little on $T_c$ of $YBa_{2}Cu_{3}O_{7-x}$ film. $J_c$ of YBCO film was enhanced with excess yttrium addition. Jc maximum of $2.21\;MA/cm^2$ (77 K, self field) appeared with the $15\;at\%$ addition of excess yttrium. With further yttrium addition up to $20\;at\%$, Jc decreased down to $0.9\;MA/cm^2$.

• Progress in Superconductivity
• /
• v.8 no.1
• /
• pp.87-92
• /
• 2006

The effects of Ba and Ce addition has been investigated in YBCO prepared by trifluoroacetate(TFA) metalorganic depostition(MOD) method. Precursor solutions with cation ratios of Y:Ba:Cu:Ce=1:2+x:3:x(x=0, 0.05, 0.1 and 1.5) have been prepared by adding an excess amount of cerium and barium. Coated film was calcined at lower temperature under a moisture-containing oxygen atmosphere. Superconducting YBCO films have been obtained by performing conversion heat treatment at temperature of $780{\sim}810^{\circ}C$ under a moisture-containing Ar(1,000 ppm oxygen) atmosphere. It has been shown that the critical current($I_c$) of YBCO film was degraded by doping of Ba and Ce atoms. But $I_c$ was increased as the amount of doped Ba and Ce content increased from 5% to 15 %. It was observed that there was little increase of a flux pinning force with Ba and Ce addition in YBCO film prepared by TFA-MOD process.