DOI QR코드

DOI QR Code

Enhancement of critical current density in $BaCeO_3$ doped $YBa_2Cu_3O_{7-\delta}$ thin Films deposited by TFA-MOD process

TFA-MOD공정에서 $BaCeO_3$ 첨가에 의한 $YBa_2Cu_3O_{7-\delta}$ 박막의 임계전류밀도 증가

  • 이종범 (한국산업기술대학교 에너지대학원) ;
  • 김병주 (한국산업기술대학교 에너지대학원) ;
  • 이희균 (한국산업기술대학교 신소재공학과) ;
  • 홍계원 (한국산업기술대학교 에너지대학원)
  • Published : 2008.03.31

Abstract

The effect of $BaCeO_3$ doping on the critical current density of YBCO film by TFA-MOD method was studied. $BaCeO_3$ doping was made by two method; one is direct addition of $BaCeO_3$ nano-sized powder prepared by citrate process followed by grinding with planetary ball mill for 10 hours. Another is addition of Ba-Ce precursor solution prepared with Ba-acetate and Ce acetate dissolved in TFA to the YBCO-TFA precursor solution. The film was made by standard dip coating and heat treatment process with conversion temperature of $790^{\circ}C$ in 1000 ppm oxygen containing moisturized Ar gas atmosphere. The direct addition of $BaCeO_3$ powder resulted in YBCO film with good epitaxial growth and no evidence of second phase formation. The addition through precursor solution resulted in the increase of critical current density upto 30 at% doping and uniform dispersion of $BaCeO_3$ fine inclusion was confirmed by SEM-EDX.

Keywords

References

  1. Ijima Y, Kimura M, Saitoch T and Takeda K, "Development of Y-123-coated conductors by IBAD process," Physica C 335, 15 (2000) https://doi.org/10.1016/S0921-4534(00)00131-3
  2. Ijima Y, Kakimoto K, Kimura M, Takeda K and Saitoh T, Kakimoto K, Kimura M, T, "Reel. to reel continuous formation of Y-123 coated conductors by IBAD and. PLD method," IEEE Trans. Appl. Supercond. 11, 2816 (2001) https://doi.org/10.1109/77.919649
  3. Yamane H, Hirai T, Watanabe K, Kobayashi N, Muto Y, Hasei M and Kurosawa H, "Preparation of a high-Jc Y-Ba-Cu-O film at 700 $^{\circ}C$ by thermal chemical vapor deposition," Appl. Phys. 69, 7984 (1991)
  4. A. Gupta, R. Jagannathan, E. I.Cooper, E. A. Giess, J. I. Landman, and B. W. Hussey, "Superconducting oxide films with high transition temperature prepared from metal trifluoroacetate precursors," Appl. Phys. Lett., 52, 2077-2079 (1988) https://doi.org/10.1063/1.99752
  5. P. C. Mclntyre, M. J. Cima, and M. F. Ng, "Metal organic deposition of high-Jc Ba YCu O thin films from trifluoroacetate precursors onto (100) SrTiO," J. Appl. Phys., vol. 68, 4183-4187 (1990) https://doi.org/10.1063/1.346233
  6. Kem Young Yi, et al,. "Effect of Cerium Doping on Superconducting Properties of YBCO film prepared by TFA-MOD method" Progress in Superconductivity vol.8 No.1, 87-92 (2006)
  7. Seung-yi Lee, et al., "Effect of precursor composition on Jc enhancement of YBCO film prepared by TFA-MOD method," Appl Physica C, Superconductivity, vol 445-448, pp. 578-581 (2006) https://doi.org/10.1016/j.physc.2006.04.084
  8. J.Gutierrez, et al., "Strong isotropic flux pinning in solution-derived YBa2Cu3O7-$\delta$ nanocomposite superconductor fims," Nature materials vol 6, pp. 367-373(2007) https://doi.org/10.1038/nmat1893
  9. K. Ouzaoui et al., "Electrical conductivity of BaCeO3 synthesized by new sol-gel method," M. J. CONDENSED MATER Volume7, number1, (2006)
  10. Dong Wook Lee et al, "Low temperature synthesis of BaCeO3 nano powders by the citrate process," Journal of the Korean Ceramic Society Vol. 39, No. 6, pp. 604-609, (2002) https://doi.org/10.4191/KCERS.2002.39.6.604