• 한국HCI학회:학술대회논문집
• /
• 2008.02b
• /
• pp.233-238
• /
• 2008

Ambient Media (or ambient displays, Wisneski et al 1998) is one of newly emergent dynamic design objects, representing information through subtle changes of everyday objects and environments. Unlike the existing GUI-based media focusing on the situation that a user is concentrating the media, ambient media enable a user to be peripherally aware of the information without his/her concentration. In order to design ambient media, it is necessary to interpret the basic elements of dynamic changes in physical space and the proper method to apply them for peripherally representing information in ambient media. The aim of this study is to investigate dynamic design elements and the method to apply them for ambient media design in physical space. We explored and refined the type of the dynamic design elements, analyzing dynamic qualities of ambient media cases as well as various time based design fields. As a result, 4 dynamic elements - tempo, connectivity, intensity and rhythm- were proposed. By literature reviews related to peripheral awareness in psychology or ambient media, we analyzed the characteristics of dynamic design elements. Based on that, we developed a new ambient media, 'Cyber Pung-Kyung', and applied dynamic elements for designing the prototype system. The research outcome is expected to contribute designing ambient media which can represent information peripherally or centrally as needed. Understanding the dynamic design elements is helpful for designing various time based design outcomes as well.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.62-68
• /
• 2010

This work proposes a 10b 100MS/s DAC based on a segmented local matching technique primarily for small chip area. The proposed DAC employing a segmented current-steering structure shows the required high linearity even with the small number of devices and demonstrates a fast settling behavior at resistive loads. The proposed segmented local matching technique reduces the number of current cells to be matched and the size of MOS transistors while a double-cascode topology of current cells achieves a high output impedance even with minimum sized devices. The prototype DAC implemented in a 0.13um CMOS technology occupies a die area of $0.13mm^2$ and drives a $50{\Omega}$ load resistor with a full-scale single output voltage of $1.0V_{p-p}$ at a 3.3V power supply. The measured DNL and INL are within 0.73LSB and 0.76LSB, respectively. The maximum measured SFDR is 58.6dB at a 100MS/s conversion rate.

• Research in Plant Disease
• /
• v.16 no.1
• /
• pp.48-58
• /
• 2010

In Korea, EBI fungicides which are highly effective for control of pear scab and rust but of high risk for development of resistance have been frequently sprayed by majority of pear growers. To detect any possible resistance or reduced sensitivity in the field strains of scab fungus to five EBIs, difenoconazole, fluquinconazole, flusilazole, fenarimole and hexaconazole, sensitivity tests were conducted with fungal specimens collected in Ulsan and Naju where scab usually occurs and EBIs have been intensively sprayed for many years. As the strains for which $EC_{50}$ values of the EBIs were largely shifted from those of base-line were occasionally found, the resistant or less sensitive strains were supposed to be distributed. In the activity test for the EBIs by artificial inoculation, in which EBI-treated pear leaves on the potted seedlings were inoculated with fungal spores collected in the two regions, development of resistances to EBIs were confirmed. Since the fungal spores collected at 4 and 2 orchards in Naju and Ulsan, respectively, produced much higher disease incidence on the leaves treated with hexaconazole than those on the untreated control, those fungal specimens were determined as resistant to hexaconazole. Similar results were also obtained with two specimens from Ulsan for flusilazole.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.746-756
• /
• 2015

The goal of this study was to review the wood shrinkage published in Journal of The Korean Wood Science and Technology from 1976 to 2015. Previous studies reported that shrinkage from Larix kaempferi in the tangential, radial, longitudinal directions ranged from 4.21%-9.79%, 2.09%-4.67%, 0.17%-0.33%, respectively. When different drying methods including closed cylinder drying, oven drying, and room temperature drying were used, volumetric shrinkage of Dipterocarpus grandiflorus was different, ranging from 31.6% to 21.0%. With an increment of the drying temperature of $115^{\circ}C$, $120^{\circ}C$, $125^{\circ}C$, the shrinkage of Larix kaempferi did not show a consistent trend. When sample size of Pinus densiflora was increased from $20{\times}20{\times}20mm$ to $100{\times}100{\times}100mm$, the tangential, radial and volumetric shrinkage decreased 2.61%, 1.32%, 0.80%, respectively. When a caliper having a sensitivity of 0.01 mm was used to measure $20mm^3$ specimen from Cryptomeria japonica, the measurement error occurred 1.97% in the radial direction and 35.7% in the longitudinal direction. From the previous studies, wood shrinkage could be influenced by sample size, drying method and measurement technique.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.12
• /
• pp.65-72
• /
• 2008

This paper proposes a new dual-loop digital PLL(DPLL) using seamless frequency tracking methods. The dual-loop construction, which is composed of the coarse and fine loop for fast locking time and a switching noise suppression, is used successive approximation register technique and TDC. The proposed DPLL in order to compensate the quality of jitter which follows long-term of input frequency is newly added cord conversion frequency tracking method. Also, this DPLL has VCO circuitry consisting of digitally controlled V-I converter and current-control oscillator (CCO) for robust jitter characteristics and wide lock range. The chip is fabricated with Dongbu HiTek $0.18-{\mu}m$ CMOS technology. Its operation range has the wide operation range of 0.4-2GHz and the area of $0.18mm^2$. It shows the peak-to-peak period jitter of 2 psec under no power noise and the power dissipation of 18mW at 2GHz through HSPICE simulation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.3
• /
• pp.410-420
• /
• 2012

A trial was conducted to: i) evaluate the BW growth, energy intakes and energetic efficiency of pigs fed high and low density diets from 27 to 141 kg BW, ii) evaluate sire line and sex differences when fed both diets, and iii) to compare ME to NE as predictor of pig performance. The experiment had a replicated factorial arrangement of treatments including four sire lines, two sexes (2,192 barrows and 2,280 gilts), two dietary energy densities and a light or heavy target BW, 118 and 131.5 kg in replicates 1 to 6 and 127 and 140.6 kg in replicates 7 to 10. Pigs were allocated to a series of low energy (LE, 3.27 Mcal ME/kg) corn-soybean meal based diets with 16% wheat midds or high energy diets (HE, 3.53 to 3.55 Mcal ME/kg) with 4.5 to 4.95% choice white grease. All diets contained 6% DDGS. The HE and LE diets of each of the four phases were formulated to have equal lysine:Mcal ME ratios. Pigs were weighed and pen feed intake (11 or 12 pigs/pen) recorded at 28-d intervals. The barrow and gilt daily feed (DFI), ME (MEI) and NE (NEI) intake data were fitted to a Bridges function of BW. The BW data of each sex were fitted to a generalized Michaelis-Menten function of days of age. ME and NE required for maintenance (Mcal/d) were predicted using functions of BW (0.255 and 0.179 BW^0.60 respectively). Pigs fed LE diets had decreased ADG (915 vs. 945 g/d, p<0.001) than pigs fed HE diets. Overall, DFI was greater (p<0.001) for pigs fed the LE diets (2.62 vs. 2.45 kg/d). However, no diet differences were observed for MEI (8.76 vs. 8.78 Mcal/d, p = 0.49) or NEI (6.39 vs. 6.44 Mcal/d, p = 0.13), thereby indicating that the pigs compensated for the decreased energy content of the diet. Overall ADG:DFI (0.362 vs. 0.377) and ADG:Mcal MEI (0.109 vs. 0.113) was less (p<0.001) for pigs fed LE compared to HE diets. Pigs fed HE diets had 3.6% greater ADG:Mcal MEI above maintenance and only 1.3% greater ADG:Mcal NEI (0.152 versus 0.150), therefore NEI is a more accurate predictor of growth and G:F than MEI.Pigs fed HE diets had 3.4% greater ADG:Mcal MEI and 0.11% greater ADG:NEI above maintenance than pigs fed LE diets, again demonstrating that NEI is a better predictor of pig performance than MEI. Pigs fed LE diets had similar daily NEI and MEI but grew slower and less efficiently on both ME and NE basis than pigs fed HE diets. The data suggest that the midds NE value (2.132 Mcal/kg) was too high for this source or that maintenance was increased for pigs fed LE diets.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.4
• /
• pp.531-540
• /
• 2012

Pigs from four sire lines were allocated to a series of low energy (LE, 3.15 to 3.21 Mcal ME/kg) corn-soybean meal-based diets with 16% wheat midds or high energy diets (HE, 3.41 to 3.45 Mcal ME/kg) with 4.5 to 4.95% choice white grease. All diets contained 6% DDGS. The HE and LE diets of each of the four phases were formulated to have equal lysine:Mcal ME ratios. Barrows (N = 2,178) and gilts (N = 2,274) were fed either high energy (HE) or low energy (LE) diets from 27 kg BW to target BWs of 118, 127, 131.5 and 140.6 kg. Carcass primal and subprimal cut weights were collected. The cut weights and carcass measurements were fitted to allometric functions (Y = A $CW^B$) of carcass weight. The significance of diet, sex or sire line with A and B was evaluated by linearizing the equations by log to log transformation. The effect of diet on A and B did not interact with sex or sire line. Thus, the final model was cut weight = (1+$b_D$(Diet)) A($CW^B$) where Diet = -0.5 for the LE and 0.5 for HE diets and A and B are sire line-sex specific parameters. Diet had no affect on loin, Boston butt, picnic, baby back rib, or sparerib weights (p>0.10, $b_D$ = -0.003, -0.0029, 0.0002, 0.0047, -0.0025, respectively). Diet affected ham weight (bD = -0.0046, p = 0.01), belly weight (bD = 0.0188, p = 0.001) three-muscle ham weight ($b_D$ = -0.014, p = 0.001), boneless loin weight (bD = -0.010, p = 0.001), tenderloin weight ($b_D$ = -0.023, p = 0.001), sirloin weight ($b_D$ = -0.009, p = 0.034), and fat-free lean mass ($b_D$ = -0.0145, p = 0.001). Overall, feeding the LE diets had little impact on primal cut weight except to decrease belly weight. Feeding LE diets increased the weight of lean trimmed cuts by 1 to 2 percent at the same carcass weight.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1023-1035
• /
• 2016

Suspended sediment concentration (SSC) is a crucial riverine parameter in terms that it can be utilized for analyzing sediment transport, stability assessment of river and structure and so on. However, in case of domestic, sediment discharge data are not enough because of using conventional sediment samplers. This study aimed at developing a practical technique for estimating suspended sediment concentration in high spatial and temporal resolution by building relationship between acoustic backscatter (or SNR) from H-ADCP with actually observed data using LISST-100X. In this regard, a dedicated correction algorithm was proposed particularly for the adapted H-ADCP (SonTek SL-3000). Then, a SNR-SSC relation was built based upon a real-scale field experiment, where both H-ADCP and LISST-100X were concurrently operated to observe SNR and SSC, respectively. The coefficient of determination for the developed regression equation of SNR-SSC relation was around 0.85~0.88, thereby the relation could be evaluated to be highly correlated. The result of this study might be potentially applied for real-time and simultaneous observation of SSC when H-ADCP could be applied.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.3
• /
• pp.323-332
• /
• 1997

Drainage is needed to run off excessive water stress during the rainy season for soybean cultivation in the converted upland from paddy field. This study was conducted to evaluate the effect of planting dates and drainage methods on growth and yield of sprout soybeans in the converted upland from paddy field. The stem and root growth at flowering stage showed no difference by drainage method but plant height, number of nodes and branches, and fresh weight of stem and root were much greater as planting date delayed. Seed yield was correlated positively with fresh weight of stem and root, and T/R ratio at the flowering stage, respectively. Lodging degree was not different by drainage method but was higher in planting at June 16 than May 15. Number of pods and 100 seed weight were not different by drainage method and 100 seed weight was heavy in Eunhakong, light in Kwangankong as planting date delayed. Higher seed yield was observed in surface drainage than open ditched drainage. Yield performance of Eunhakong was good in late planting, while that of Kwangankong was in early planting.

• Archives of design research
• /
• v.19 no.4 s.66
• /
• pp.71-80
• /
• 2006

Collaboration has become essential in the product design process due to internationalized and specialized business environments. This study presents a real-time collaborative 3D design workspace for distributed designers, focusing on the development and the evaluation of new interaction techniques supporting nonverbal communication such as awareness of participants, shared manipulation and tele-presence. Requirements were identified in terms of shared objects, shared workspaces and awareness through literature reviews and an observational study. An Augmented Reality based collaborative design workspace was developed, in which two main interaction techniques, Turn-table and Virtual Shadow, were incorporated to support shared manipulation and tele-presence. Turn-table provides intuitive shared manipulation of 3D models and physical cues for awareness of remote participants. Virtual shadow supports natural and continuous awareness of location, gestures and pointing of partners. A lab-based evaluation was conducted and the results showed that interaction techniques effectively supported awareness of general pointing and facilitated discussion in 3D model reviews. The workspace and the interaction techniques can facilitate more natural communication and increase the efficiency of collaboration on virtual 3D models between distributed participants (designer-designer, engineer, or modeler) in collaborative design environments.