• Nuclear Engineering and Technology
• /
• v.56 no.5
• /
• pp.1627-1637
• /
• 2024

This research paper proposes a novel methodology for predicting the optimal location of friction supports to effectively mitigate vibrational energy in piping systems. The incorporation of friction forces in the dynamic characteristics of the system introduces inherent nonlinearity, making its analysis challenging. Typically, numerical solutions in the time domain are employed to circumvent the complexities associated with finding analytic solutions for nonlinear systems. However, time domain analysis (TDA) can be computationally intensive and demand significant computational resources due to the intricate calculations stemming from nonlinearity. To address this computational burden, this study presents an efficient approach based on linear analysis to predict the ideal position for installing friction supports as a replacement for fixed supports. Furthermore, we investigate the relationship between the installation positions of friction supports and their effectiveness in absorbing vibrations using the harmonic balanced method (HBM). Both methodologies are validated by comparing the obtained results with those obtained through time domain analysis (TDA) using the finite element method (FEM).

• The Journal of the Korean Society for Microbiology
• /
• v.10 no.1
• /
• pp.1-8
• /
• 1975

Despite a number of recent studies on appendix its function appears to remain unknown. The present studies were undertaken in order to extend and confirm the previous studies concerning the role of appendix in immune response. An early hemagglutinin response of mercaptoethanol sensitive antibody(IgM antibody) in rabbit injected intravenously(i.v.) with 200mcg of bovine gamma globulin(BGG) was abolished by lethal whole body irradiation(900 r), but preserved in animals whose appendix and bone marrow were shielded during irradiation. Late formation of mercaptoethanol resistant antibody(IgG antibody) and the development of memory in bone marrow shielded animals were not affected by irradiation of the appendix. Formation of either IgM or IgG antibody to sheep red blood cells(SRBC) injected i.v. as determined by direct plaque forming cell(DPFC) technique in spleen were effectively abolished by appendectomy, thymectomy, or both followed by irradiation. When bone marrow was shielded in combination with autologous appendix reconstitution, DPFC response was about 5 times greater than the sum of two. Lysed appendix cells failed to restore the response. Lethally irradiated rabbits restored with combination of autologous appendix and thymus cells showed DPFC responses which were essentially normal. Three pools of appendix were obtained by manual separation technique and were stimulated with soluble concanavalin A(Con A), phytohemagglutinin-P(PHA) and pokeweed mitogen(PWM). Rabbit appendix cells responded to Con A, PHA and PWM. Cells of thymus dependent area(TDA) of the appendix were relatively enriched in their response to T cell mitogens compared to dome and follicle cells. The PHA/Con A responsive ratio of appenix TDA subpopulation was high, indicating that Con A responsive cells have a wider distribution among appendix. This finding showed that interfollicular area of the appendix is thymus-dependent. The present studies confirmed other evidence that the rabbit appendix cells itself are unable to form antibody and T lymphocytes in appendix TDA may be heterogenous, and that the appendix cells are synergistic with either bone marrow or thymus cells in the early hemagglutinin on splenic antibody response to BGG or SRBC.

• Toxicological Research
• /
• v.14 no.4
• /
• pp.525-533
• /
• 1998

The covalent interactions of toluenediisocyanate (TDI) with macromolecules were investigated both in vitro and in vivo. In vitro incubations of 2,4- and 2,6-TDI with DNA or proteins resulted in dose-dependent formation of TDI-protein and TDI-DNA adducts. TDI-treated DNA was highly resistant to enzymatic digestion and thermal hydrolysis, but was readily hydrolyzed under acidic conditions by releasing its corresponding toluenediamine (TDA), suggesting that TDI caused the crosslinking of DNA. Reaction of TDI with albumin and globin resulted in the formation of several adducts, and some adducts were formed in blood of TDI-treated rats in a dose-dependent fashion. Administration of TDI to rats resulted also in a dose-dependent binding of TDI to hepatic tissue. Levels of TDI-albumin adducts were 10 times higher than those of TDI-globin adducts; the biological half lives of TDI-albumin and TDI-globin adducts were 1.2 and 12.5 days, respectively. Globin adducts were detected up to 28 days after the treatment. Hepatic TDI protein adducts were persistent for a substantial period whereas the levels of hepatic TDI-DNA adduct were decreased rapidly. These results indicate that the isocyanato group of TDI is not readily hydrolyzed under physiological conditions, is transported to other organs, and is bound to DNA and/or proteins without further metabolic activation. As the adducted products degrade in the body, TDA is released and introduced to the liver. TDA may additionally bind to hepatic tissue after metabolic activation. Thus, the toxic effect of TDI exposure is considered to persist during the lifetime of the adducted biological macromolecules.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.25 no.4
• /
• pp.296-311
• /
• 2021

Topological Data Analysis (TDA), a relatively new field of data analysis, has proved very useful in a variety of applications. The main persistence tool from TDA is persistent homology in which data structure is examined at many scales. Representations of persistent homology include persistence barcodes and persistence diagrams, both of which are not straightforward to reconcile with traditional machine learning algorithms as they are sets of intervals or multisets. The problem of faithfully representing barcodes and persistent diagrams has been pursued along two main avenues: kernel methods and vectorizations. One vectorization is the Betti sequence, or Betti curve, derived from the persistence barcode. While the Betti sequence has been used in classification problems in various applications, to our knowledge, the stability of the sequence has never before been discussed. In this paper we show that the Betti sequence is unstable under the 1-Wasserstein metric with regards to small perturbations in the barcode from which it is calculated. In addition, we propose a novel stabilized version of the Betti sequence based on the Gaussian smoothing seen in the Stable Persistence Bag of Words for persistent homology. We then introduce the normalized cumulative Betti sequence and provide numerical examples that support the main statement of the paper.

• Corrosion Science and Technology
• /
• v.23 no.2
• /
• pp.145-153
• /
• 2024

In the automotive industry, the hole expanding test is widely used to assess the formability of punched holes in sheets. This test provides a good representation of formability within the framework defined by the ISO 16630 standard. During hole expanding tests on galvanized high strength steels, a negative effect was observed when there was a delay between hole punching and expansion, as compared to performing both operations directly. This effect is believed to be caused by hydrogen aging, which occurs when hydrogen diffuses towards highly-work hardened edges. Therefore, the aim of this study is to demonstrate the migration of hydrogen towards work-hardened edges in high strength Zn-coated steel sheets using a novel Thermal Desorption Analyzer (TDA) designed for small samples. This newly-developed TDA setup allows for the quantification of local diffusible hydrogen near cut edges. With its induction heating and ability to analyze Zn-coated samples while reducing artifacts, this setup offers flexible heat cycles. Through this method, a hydrogen gradient is observed over short distances in shear-cut galvanized steel sheets after a certain period of time following punching.

• Journal of Food Hygiene and Safety
• /
• v.30 no.1
• /
• pp.81-86
• /
• 2015

The purpose of our paper was to investigate the migration level of 4,4'-MDA(4,4'-methylenedianiline), 2,4-TDA(2,4-toluenediamine), aniline, acrylonitrile and methylmeth acrylate from plastic cookwares into food simulants and to evaluate the safety of each monomers. The test articles for monomers were PA (polyamide) items for 4,4'-MDA, 2,4-TDA and aniline, PU (polyurethane) items for 4,4'-MDA, ABS (acrylonitrile-butadiene- styrene) items for acrylonitrile, and acrylic resin items for methylmethacrylate. All the article samples of 321 intended for contact with foods were purchased in domestic market. 4,4'-MDA, 2,4-TDA and aniline were analyzed by LC-MS/MS (liquid chromatography -tandem mass spectrometer), acrylonitrile by GC-NPD (gas chromatography-nitrogen phos phorus detector) and methyl methacrylate by GC-FID (gas chromatography-flame ionization detector). The migration level of monomers were within the migration limits of Ministry of Food and Drug Safety (MFDS). As a result of safety evaluation, our results showed that the estimated daily intake (EDI, mg/kg bw/day)s were $2.39{\times}10^{-9}$ and $1.20{\times}10^{-9}$ for 4,4'-MDA and 2,4-TDA of PA, $4.32{\times}10^{-9}$ for acrylonitrile of ABS and $2.27{\times}10^{-7}$ for methylmethacrylate of acrylic resin. Reference Dose (RfD, mg/kg bw/day) of acrylonitrile and tolerable daily intake (TDI, mg/kg bw/day) of methacrylate were established respectively as 0.001 by EPA (US Environmental Protection Agency) and as 1.2 by WHO (World Health Organization). When comparing with RfD and TDI, the EDIs of acrylonitrile and methylmethacrylate accounted for $4.32{\times}10^{-4}%$ and $1.89{\times}10^{-5}%$ respectively.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.974-978
• /
• 1999

This study was concerned with the scouring effect of anionic surfactants, PAPE(sodium polyoxyethylene alkyl phosphoric ester) for cotton fibres. Sodium polyoxyethylene(7) nonylphenyl phosphoric ester(CPB-1) and the sodium polyoxyethylene(7) tridecyl phosphoric ester(CPB-2) were synthesized by the phosphoric esterification reaction from NP-7(polyoxyethylene(7) nonylphenyl ether) and TDA-7(polyoxyethylene(7) tridecyl ether) as scouring agents. Defoaming ability, fibre wetting time and absorbency rate of scouring agents were investigated. Being compared with the conventional scouring agent(Ultravon GP; Ciba-guyge Co.), CPB-1 and CPB-2 showed a higher defoaming ability in the cotton scouring process at room temperature. And CPB-1 has a higher wetting effect than the agents, CPB-2 or GP in distilled water bath but CPB-2 showed more scouring effect in 1.2 wt % NaOH solution bath.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.73-82
• /
• 2015

In evaluating lateral behavior on the seismic and wind load, the purpose of sensitivity analysis is to find critical variables and to identify characteristic response with variability of variables. The sensitivity analysis is very important in structural diagnosis, repair and reinforcement field. This study investigates the sensitivity by linear static analysis applying the TDA method in changing angles of diagrid braces on the same height structures. In case of mid rise model, under the seismic load, the brace member is determined as a major variable at $58^{\circ}$ but a high rise model, under the wind load, has the brace member as a major variable at $67.4^{\circ}$. In addition, location of critical sensitivity on the mid rise model is distributed over middle section, while it is distributed lower section on the high rise model.

• Journal of Adhesion and Interface
• /
• v.15 no.4
• /
• pp.151-160
• /
• 2014

A series of terpolymers based on stearyl methacrylate (SMA), n-methyol acrylamide (n-MAM), and 2-(perfluorooctyl) ethyl acrylate (PFOEA) were synthesized by changing PFOEA contents up to 8 wt% in order to obtain optimal water-repellent properties. In addition, various contents of m-isopropenyl-${\alpha}$,${\alpha}^{\prime}$-dimethylbenzyl isocyanate (TMI) from 1 to 4 wt% were added to the above terpolymers with 4 wt% of PFOEA content. The emulsion polymerization was carried out using tridecyl alcohol (EO)7 (TDA-7) as a nonionic surfactant, alkyl dimethyl amine derivatives (ADAD) as a cationic surfactant, and 2,2'-azobis(2-amidinopropane dihydrochoride) (AAPDL) as an initiator. The synthesized copolymers were characterized by FT-IR spectroscopies, contact angle, surface energy, and water-repellency. Surface and thermal properties were analyzed by SEM, TGA, and DSC. It was found that water repellency increased with increasing the contents of PFOEA and TMI.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.232-237
• /
• 2006

Operation deflection shapes(ODS) is defined as a motion of structure at particular frequency. The ODS is eligible to show any types of structural motions while the modes supply solutions only to linear and stationary motion. The principal vibration source of an auto teller machine(ATM) case was occurred due to resonance which was found by modal analysis. To reduce the vibration of ATM case, the motion of the case was visualized using ODS analysis, which can suggest how to modify the structure. As a result the vibration of the ATM case was greatly reduced with a stiffening bar between the opposite plates.