• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.5
• /
• pp.41-52
• /
• 2004

In this study, parameters of long and short term runoff model were optimized using genetic algorithm as a basic research for integrated water management in a watershed. In case of Korea where drought and flood occurr frequently, the integrated water management is necessary to minimize possible damage of drought and flood. Modified TANK model was optimized as a long term runoff model and storage-function model was optimized as a short term runoff model. Besides distinguished parameters were applied to modified TANK model for supplementing defect that the model estimates less runoff in the storm period. As a result of application, simulated long and short term runoff results showed 7% and 5% improvement compared with before optimized on the average. In case of modified TANK model using distinguished parameters, the simulated runoff after optimized showed more interrelationship than before optimized. Therefore, modified TANK model can be applied for the long term water balance as an integrated water management in a watershed. In case of storage-function model, simulated runoff in the storm period showed high interrelationship with observed one. These optimized models can be applied for the runoff analysis of watershed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.95-99
• /
• 2005

중장기 이수계획 수립이나 미래 기후변화에 대한 수자원 영향평가 연구 등에서 월 단위 이상의 유출량을 계산할 수 있는 강우-유출 모형의 필요성이 강조되고 있다. 본 연구에서는 월 유출모의를 위해 개념적 물수지모형의 적용가능성을 검토하였다. 4개의 물수지모형을 대청댐 상류유역에 대하여 구축하고, 기존에 구축된 일 강우-유출 모형인 SSARR 및 TANK 모형과 비교하였다. 그 결과 가장 우수한 모의능력을 보여준 abcd 모형을 미계측유역에 적용하기 위해 매개변수를 지역화기법으로 추정하였다. 즉 13개 다목적댐 중 9개 다목적댐에서 구한 매개변수와 유역특성인자를 이용하여 회귀식을 작성한 후 미계측유역으로 가정한 4개 다목적댐에 적용하여 검증하였다. 검증결과 효율성계수가 $90\%$ 이상으로 비교적 간단하면서 모의능력이 우수한 개념적 월 물수지모형은 중장기 유출량모의에 그 활용성이 클 것으로 기대된다.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.4
• /
• pp.121-133
• /
• 2015

The TANK model has been widely used in rainfall-runoff modeling due to its simplicity of concept and computation while achieving forecast accuracy. A major barrier to the model application is to determine parameter values for ungauged watersheds, leading to the need of a method for the parameter estimation. The objective of this study was to develop regression equations for estimating the 3th TANK model parameters considering their variations for the ungauged watersheds. Thirty watersheds of dam sites and stream stations were selected for this study. A genetic algorithm was used to optimize TANK model parameters. Watershed characteristics used in this study include land use percent, watershed area, watershed length, and watershed average slope. Generalized equations were derived by correlating to the optimized parameters and the watershed characteristics. The results showed that the TANK model, with the parameters determined by the developed regression equations, performed reasonably with 0.60 to 0.85 of Nash-Sutcliffe efficiency for daily runoff. The developed regression equations for the TANK model can be applied for the runoff simulation particularly for the ungauged watersheds, which is common for upstream of agricultural reservoirs in Korea.

• Journal of Korean Society of Forest Science
• /
• v.98 no.3
• /
• pp.272-278
• /
• 2009

This study was conducted to develope calculation method of standard rainfall, which was used for predicting the outbreaking time of disaster by using Tank model, on warning and evacuation for soil sediment disaster. We investigate adeption possibility of developed method through comparing storage function method with Tank model. We calculated storage amount rainfall by storage function method and Tank model with 36 hillslope failures which have record on outbreaking time of disaster. The result in case of Sedimentary (quarternary period) showed that the difference of outbreaking time was 1.6 hour in case of tank model, but 3.2 hour in case of storage function method. In addition, the deviation of the peak storage were 7% in case of tank model, but 63% in case of storage function method. Total evacuation period was analyzed by using observed 5 years (1993-1997) rainfall data as well as each standard rainfalls which were determinated by two methods. The result showed that evacuation time by storage function method was about twice as many as that by tank model. Therefore, we concluded that calculation by tank model for predicting the outbreaking time of disaster was more useful and accurate than storage function method.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.35 no.3
• /
• pp.23-35
• /
• 1993

The objectives of this paper were to validate the proposed network flow model using field data and to demonstrate the model applicability for various purposes. The model was tested with data from the Banweol watershed, where an intentive streamflow gauging system has been established. Model parameters were not calibrated with field data so that it can be validated as ungaged conditions. Three different schemes were employed to represent the drainage system of the tested watershed : a single, complex, and detailed network. The single network assumed the watershed as a cell, while complex and detailed networks considered several cells. The results from different schemes were individually compared satisfactorily to the observed daily stages at the Banweol reservoir located at the outlet of the watershed. The results from three schemes were in close agreement with each other, Justifying that the model performs very well for different network schemes being used. Daily streamflow from three network schemes was compared for a selected reach within the watershed. The results were very close to each other regardless of network formulation. And the model was applied to simulate daily streamflow before and after the construction of a reservoir at a reach. The differences were discussed, which reflected the influences of the dam construction upon the downstream hydrology. Similar appliocations may be possible to identify the effects of hydraulic structures on streamflow.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.1
• /
• pp.32-41
• /
• 1994

This paper presents the model-ship correlations based on model test results of 36 ships. All of model tests were conducted at KRISO towing tank The correlation factors $C_P,\;C_N,\;and\;C_{NP}$ are estimated by the ITTC Standard Method and compared with the results of another towing tank. In the 36 ships, the block coefficients of thirty ships are greater than 0.72. Nevertheless the comparison of factors is in good agreement. The corrections to the scale effect on wake fraction ${\Delta}{\omega}_c$ and roughness allowance $C_{Ac}$ are subject matter in practice. The correction formulae are proposed by functions of ship length and form factor. And the correction formula of resistance coefficient ${\Delta}C_{Fc}$ based on Townsis's hull roughness formula is presented.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.6
• /
• pp.591-596
• /
• 2012

Recently, a vessel's maneuvering performance is considered to be an important subject to secure safety at short sea shipping. Especially the high turning performance, which is required to avoid the marine pollution by the ships that was grounded, becomes more severe. In this paper, we discuss the effect of increasing rudder force on turning performance of short sea shipping ship by free running test in towing tank. First of all, we make the 47K PC model ship and high-lift rudder using Coanda effect. And we make the free running test system for the turning test in towing tank. And also we perform the turing test of 47K PC model in several changes of Coanda jet momentum and evaluate the turing performance such as advance and tactical diameter. Finally, we confirm that the increasing of rudder force is very effective to improvement of turning performance of short sea shipping ship.

• Journal of Korea Water Resources Association
• /
• v.51 no.12
• /
• pp.1171-1180
• /
• 2018

Korea's water transmission system is operated by the nonpressure flow method that flows from highlands to lowlands due to the nature of Korea with many mountainous areas. In order to store water in the highlands, the water pumps are installed and operated. However, In this process, a lot of electrical energy is consumed. therefore, it is necessary to minimize the energy consumption by optimizing the size and operation schedule of the water pumps. The optimal capacity and operation method of the water pump are affected by the size of the tank (distributing reservoir). Therefore, in order to economically design and operate the water transmission system, it is reasonable to consider both the construction cost of the water pump and the tank and the long-term operation cost of the water pump at the step of determining the scale of the initial facilities. In this study, the optimum design model was developed that can optimize both the optimal size of the water pump and the tank and the operation scheduling of the water pump by using the genetic algorithm (GA). The developed model was verified by applying it to the water transmission systems operated in Korea. It is expected that this study will help to estimate the optimal size of the water pump and the tank in the initial design of the water transmission system.

• Journal of the Korean Geophysical Society
• /
• v.1 no.1
• /
• pp.59-68
• /
• 1998

Ground penetrating radar (GPR) experiments were performed in a sand tank to study the ability of detection of buried pipes and to characterize the signal of the reflection wave. The ratios of diameter of buried pipes to the depth were set 4 up to 24 % and materials were metal, synthetic resin, and wood. In case of groundwater table below buried materials, strong reflection signals were observed irrespective of diameter and depth except for wood. While it is very difficult to detect the reflection signals in case that the groundwater table is set to higher than buried materials. The reflection signals from the bottom of the sand tank, however, were clearly observed even in case of higher groundwater table. This implies that the weak reflection signals from the buried materials are not all due to the wave attenuation. The vertical reflection profiling method is recommended in case that the object of the survey is to find horizontal position of buried material because this method has the advantage in cost and time of survey. However, the full or partial CMP gather method is recommended in case that the objects of the survey are to get the detailed subsurface information, i.e. the depth to buried material, interval velocity of geological layer, and mapping the groundwater table.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.3
• /
• pp.22-28
• /
• 1999

Flow measurements on the propeller plane of a 180,000 TDW Bulk Carrier model are carried out using a 3D fiber optics LDV at a towing tank. Mean velocities are successfully obtained. The turbulence characteristics such as Reynolds stresses, skewnesses, and flatnesses, are also investigated. However, those turbulence characteristics may include some errors due to the characteristics of the towing-tank experiments.