• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.3
• /
• pp.471-481
• /
• 1995

Measurement factors for the dielectric properties of low dielectric loss materials (tan${\dalta}{\le}10^{-4}$) were investigated using the dielectric rod resonator method. It was shown that the relative conductivity (${\sigma}_{r}$) should be controlled within a 5% to obtain the standard deviations of less than 0.07 for permittivity .epsilon.r and 0.06${\times}10^{-4}$ for tan.delta.respectively. Surface resistivity (R$_s$) could be reduced when the surface roughness of parallelled conducting plate was less than 0.07 .mu.m. Measurement error for the permittivity was $\pm$0.02% independent of probe loop size, whereas the error in Q value was reduced with the decrease in probe loop size and also with the increase in the absolute values of Q. Reliable Q values were determined with the probe loop size of less than 4mm. The accurate for the distance between the measuring probe loop and the sample could be obtained when the insertion loss of resonant frequency ranged -15dB - -30dB.

• Steel and Composite Structures
• /
• v.26 no.1
• /
• pp.55-66
• /
• 2018

In this paper, the response of an underground fibreglass reinforced plastic (FRP) composite pipe system subjected to realistic loading scenarios that may be experienced by an actual buried pipeline is investigated. The model replicates an arbitrary site with a length of buried pipeline, passing through a $90^{\circ}$ bend and into a valve pit. Various loading conditions, which include effects of pipe pressurization, differences in response between stainless steel and fibreglass composite pipes and severe loss of bed-soil support are studied. In addition to pipe response, the resulting soil stresses and ground settlement are also analysed. Furthermore, the locations of potential leakage and burst have also been identified by evaluating the contact pressures at the joints and by comparing stresses to the pipe hoop and axial failure strengths.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.9
• /
• pp.75-84
• /
• 2020

The study investigates and measures the impact of financial restructuring on overall financial performance of commercial banks in Vietnam. Survey data for this research were collected from audited financial reports of 28 commercial banks in Vietnam, for the period from 2008 to 2018. In the study, we have built a model of econometric regression with the dependent variable being financial results measured through ROA and ROE. The research methods used include Pooled Ordinary Least Square Model (POLS), Fixed Effects Model (FEM), Random Effects Model (REM), and different Generalized Method of Moments (GMM). The results showed that the account payables restructuring and owners' equity restructuring are much needed. Increasing the owners' equity, decreasing the account payables would improve the overall financial performance, bad debts restructuring to decrease bad debts would also improve the financial performance as well. However, the financial restructuring in the period 2012-2015 and 2016-2018, indeed worsen the financial performance during those times. The findings of this study suggest that the evaluation of the financial performance after restructuring of commercial banks in Vietnam must be based on longer data. At the same time, it is necessary to examine differences between various banking groups to draw accurate conclusions on financial performance.

• Journal of Microbiology
• /
• v.43 no.3
• /
• pp.295-300
• /
• 2005

In the present study, the performances of conventional purification methods, packed bed adsorption (PBA), and expanded bed adsorption (EBA) for the purification of the nucleocapsid protein (NP) of Newcastle disease virus (NDV) from Escherichia coli homogenates were evaluated. The conventional methods for the recovery of NP proteins involved multiple steps, such as centrifugation, precipitation, dialysis, and sucrose gradient ultracentrifugation. For the PBA, clarified feedstock was used for column loading, while in EBA, unclarified feedstock was used. Streamline chelating immobilized with $Ni^{2+}$ ion was used as an affinity ligand for both PBA and EBA. The final protein yield obtained in conventional and PBA methods was $1.26\%$ and $5.56\%$, respectively. It was demonstrated that EBA achieved the highest final protein yield of $9.6\%$ with a purification factor of 7. Additionally, the total processing time of the EBA process has been shortened by 8 times compared to that of the conventional method.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.11 no.2
• /
• pp.164-167
• /
• 2006

The influence of temperature and agitation on the growth of Escherichia coli expressing hepatitis B core antigen (HBcAg) in stirred tank bioreactor were investigated. The highest specific growth rate for E. coli$(0.844 h^{-1})$ was achieved at a temperature of $37^{\circ}C$ and an agitation speed of 250 rpm. The activation energy for the growth of the E. coli strain W3110lQ in the stirred tank bioreactor was estimated to be 11 kcal/mol. The highest protein yield was achieved at a temperature of $44^{\circ}C$ and an agitation speed of 250 rpm. The relative protein concentration at $44^{\circ}C$ is 30 and 6% higher compared to that at 30 and $37^{\circ}C$, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.293-294
• /
• 2005

We have investigated dielectric properties depending on frequency in organic light -emitting diodes using 8-hydroxyquinoline aluminum ($Alq_3$) as an electron transport and emissive material. We analyzed the dielectric properties of organic light-emitting diodes using impedance of characteristics. impedance characteristics was measured complex impedance Z and phase $\Theta$ in the frequency range of 40 Hz to $10^8$ Hz. We obtained complex electrical conductivity, dielectric constant, and loss tangent (tan$\delta$) of the device at room temperature. From these analyses, we are able to interpret a conduction mechanism and dielectric properties contributed by an interfacial and orientational polarization.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.140-141
• /
• 2005

To measure elastic properties of semiconducting materials in power cable, we have investigated modulus of EVA/acetylene black composite showed by changing the content of acetylene black. The specimen was primarily kneaded in material samples of pellet form for 5 minutes on rollers ranging between 70[$^{\circ}C$] and 100[$^{\circ}C$]. Then this was produced as sheets after pressing for 20 minutes at 180[$^{\circ}C$] with a pressure of 200[kg/cm]. The contents of conductive acetylene black were 20, 30 and 40[wt%], respectively. The modulus experiment was measured by DMA 2980. The ranges of measurement temperature were from -50[$^{\circ}C$] to 100[$^{\circ}C$] and measurement frequency is 1[Hz]. The modulus of specimens was increased according to an increment of acetylene black content. And modulus was rapidly decreased at the glass transition temperature. The tan$\delta$ of specimens was decreased according to an increment of acetylene black content.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.136-137
• /
• 2005

To measure elastic properties of semiconducting materials in power cable, we have investigated modulus of EBA/carbon black composite showed by changing the content of carbon black. The specimen was primarily kneaded in material samples of pellet form for 5 minutes on rollers ranging between 70[$^{\circ}C$] and 100[$^{\circ}C$]. Then this was produced as sheets after pressing for 20 minutes at 180[$^{\circ}C$] with a pressure of 200[kg/cm]. The contents of conductive carbon black were 20, 30 and 40[wt%], respectively. The modulus experiment was measured by DMA 2980. The ranges of measurement temperature were from -50[$^{\circ}C$] to 100[$^{\circ}C$] and measurement frequency is 1 [Hz]. The modulus of specimens was increased according to an increment of carbon black content And modulus was rapidly decreased at the glass transition temperature. The tan$\delta$ of specimens was decreased according to an increment of carbon black content.

• The Plant Pathology Journal
• /
• v.34 no.2
• /
• pp.139-142
• /
• 2018

Pyrenophoratritici-repentis is the causal agent of tan spot. According to their ability to produce necrosis and/or chlorosis on a set of four differential bread wheats, the isolates of this fungus are currently grouped into eight races. When durum wheat genotypes were added to the differential set, a new virulence type was identified in Algeria. The isolates showing this virulence pattern are unable to attack bread wheat while they cause necrosis in durum genotypes. In this work, characterization of those isolates was based on pathological and molecular aspects. This included inoculation of bread and durum wheat, and virulence gene analysis using PCR and sequencing. The results showed that all isolates caused a resistance on all bread wheats of the differential set, while they produced necrosis in durum. ToxA and ToxB genes were amplified in all isolates, whereas toxb was absent. Sequence analysis for both genes showed no differences with those found in the two functional genes. The presence of two genes, ToxA and ToxB, despite the absence of symptoms usually caused by their products, suggests the existence of a new homologous for these two genes yet unknown. The presence of ToxA in the isolate unable to produce necrosis in Glenlea is reported for the first time.

• Korean Journal of Veterinary Pathology
• /
• v.1 no.2
• /
• pp.125-134
• /
• 1997

Porcine Reproductive and Respiratory Syndrome Virus infection (PRRSV) was confirmed by serology histopathology immunohistochemistry and bacteriologic examination in young pigs. Four suckling and six weaned piglets submitted from three different farms showed coughing sneezing labored rapid abdominal respiration lethargy and anorexia. Grossly apical and cardiac lung lobes appeared mottled with pale to dark tan discoloration. Submandibular and bronchial lymph nodes were tan and enlarged. All piglets were seropositive for PRRSV antibodies by the indirect immunofluorescent antibody(IFA) test. Microscopically lung lesions were characterized by hyperplasia and hypertrophy of type 2 pneumocytes infiltration of mononuclear cells in alveolar intersitium accumulation of necrotic debris in alveolar spaces accompanied by proliferation of alveolar multinucleated syncytial cells. Using immunohistochemical technique PRRSV antigens were demonstrated in alveolar macrophages and type 2 pneumocytes in histologic lung tissue sections. Also PRRSV antigens were detected in brain lymph nodes spleen and heart. Additionally piglets showed nonsuppurative meningoencephalitis mandibular necrotic lymphadenopathy splenic atrophy and myocardial necrosis.