• Proceedings of the Korean Environmental Health Society Conference
• /
• 2001.04a
• /
• pp.55-56
• /
• 2001

• Industrial Engineering and Management Systems
• /
• v.13 no.2
• /
• pp.117-117
• /
• 2014

• Safety and Health at Work
• /
• v.13 no.4
• /
• pp.377-378
• /
• 2022

• Rubber Technology
• /
• v.9 no.1
• /
• pp.1-12
• /
• 2008

Effects of silane modifier, bis(triethoxysilylpropyl) tetrasulfide (TESPT(S4)) and bis(triethoxysilylpropyl) disulfide (TESPD(S2)), on silica filled compound were investigated upon processability, dynamic, mechanical, heat build-up, blowout properties, and silica dispersion in natural rubber (NR). The temperature of the S2 treated silica compound generated higher than that of the S4 treated compound during internal mixer compounding. The shear viscosity of the S2 compound exhibited lower than that of the S4 compound and the viscosity measured in dynamic mode was close to each other. The elongation modulus of the S2 compound exhibited lower than that of the S4; however, the tear resistance strength of the S2 compound exhibited higher than that of the S4 compound. The loss tan$\delta$ values of the S2 compound exhibited higher than those of the S4 at room temperature. The augmentation of the test temperature lowered the tan$\delta$ values of each compound, which results in close tan$\delta$ values to each other at $100^{\circ}C$. The S2 compound deformed less than the S4 compound, and the blowout time of each compound was close to each other. The S2 compound generated more heat build-up than the S4 compound. The abrasion loss of the S2 compound was less than that of the S4 compound. The size of the silica agglomerate reduced on both S4 and S2 compounds upon vulcanization. The addition of the bifunctional silanes (S2 and S4) on silica filled NR compound improved the processability of each compound and their effects were more significant on the S2 compound than the S4 compound. After vulcanization the silica agglomerate size of each compound reduced compared with before vulcanization.

• The Journal of Internal Korean Medicine
• /
• v.26 no.4
• /
• pp.926-934
• /
• 2005

It is well known that NERD(Non-erosive gastroesophageal reflux disease) is a well known esophageal disease. Symptoms of NERD may be divided into two classes. Important symptoms are acid regurgitation and heartburn. Secondary symptoms are noncardiac chest pain, dysphagia, chronic coughing, hoarseness, sore throat, globus, halitosis, epigastric pain or discomfort and abdominal pain or discomfort related to bowel movement. The relationship between NERD and Tan-San(呑酸) is complex. But the most common symptoms of NERD are acid regurgitation and heartburn. These symptoms arc similar to Tan-San and can be treated with oriental medical herb and acupuncture. Ljintang-Gamibang(二陳湯加味方) mentioned in the Donguibogam(東醫寶鑑) is one of these oriental medical herbs. Therefore, this comparative study between first medical examination and end of medical treatment with Ljintang-Gamibang and acupuncture was made. The clinical progress of NERD was investigated. After treatment, all seven patients showed improvement in all symptoms associated with NERD, including general condition. The results of this study suggest that Ljintang-Gamibang and acupuncture are an effective treatment for NERD and progressive research to develop a practical treatment of NERD are needed.

• Korean Journal of Environment and Ecology
• /
• v.25 no.1
• /
• pp.71-80
• /
• 2011

The fish fauna and characteristics of population of Zacco platypus in the 9 microhabitat at the Tan Stream was investigated from August, 2009 to April, 2010. The collected species during the survey period were 17 species belong to 7 families. Korea endemic species were Hemiculter eigenmanni and Odontobutis interrupta, which showed a ration of 11.8% in collected species. Dominant species was Z. platypus and subdominant species was Carassius auratus. Dominated species of C. auratus was at the dam-type pool, Meander-type pool, run, and rock-type pool, Pseudogobio esocinus was side channel, Rhinogobius brunneus was riffle, and Z. platypus was channel connected pool, substrate-type pool and channel unconnected pool. Length-weight relationship in the population of Z. platypus was 3.29. PCA analysis was in to the 3 groups identified. Bary-curtis cluster analysis indicated that the substrate-type pool and channel unconnected pool 65.9% showed the most similar, riffle, and dam-type 30.4% were identified as the most contrast.

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.985-992
• /
• 2013

Polytrimethylene terephthalate(PTT) offers several advantageous properties such as good tensile strength, uniformity, stiffness, toughness, UV stability, resilience, stain resistance, outstanding elastic recovery, and dyeability. The effects of annealing temperature on physical properties and the structure of PTT filaments and yarn were investigated by measuring wide-angle X-ray diffraction (WAXD), density, optical birefringence, dynamic visco elasticity, and tensile testing. The intensity of maximum tan ${\delta}$ decreased and the temperature of maximum tan ${\delta}$ shifted to a higher temperature as the annealing temperature of filaments increased; however, it shifted to a lower temperature when the annealing temperature exceeded $130^{\circ}C$. In addition, crystallinity, density and D-spacing of (010) crystal face increased as the annealing temperature increased. Optical birefringence and specific stress were almost constant up to $100^{\circ}C$ and then decreased above $130^{\circ}C$. The shrinkage of PTT filament is 0 in boiling water when annealed above $130^{\circ}C$; consequently, the use of annealed fiber above $130^{\circ}C$ can remove thermal instability when dyeing PTT fiber. In the case of yarns, the thermal stability and physical properties of yarns showed the best effect when the ply number is less than 5, twist number is less than 400tpm, and the annealing time is 20minutes.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.28 no.2
• /
• pp.63-73
• /
• 1986

The model was developed by applying the principles of Bacot and Vidal to measure the behavior of deformation of the reinforced earth wall, and various tasts were performed by using the plastic fabric filter and the galvanized steel plate as a strip. The results obtained are as follows; 1. When the reinforced earth wall is deformed by the load, the strip is completely reinforced by the backfill materials and changed to the rigid block state, under the state of failure which permits sliding only, the next theoretical equation is formed. (H/L) . tan$\theta$ [cosO-sinOtanO] =2sinO[tan($\theta$ +0) +tanO] 2.The degree of the mutual reinforcement of the backfill material and the strip depend on the physical characteristics of the each material especially the angle of shearing resistance of the backfill material is desirable over 20$^{\circ}$ and, if it is over 400, its function could be a maximum. 3.The distribution of the maximum tensile strain of the reinforcement is changing with the height of reinforced earth wall, and when the height from bottom of the reinforced earth wall is 1.85 to 3. 35m, the maximum tensile strain appears at 2m from the skin element. The maximum tensile strain is increased by the depth of the reinforced earth wall from surface, and increased with the lapse of time after construction. 4.The failure surface of the reinforced earth wall by the concrete skin was about 60$^{\circ}$and the failure behavior of the reinforced earth wall in which the fabric filter was buried was slow, and so the pore pressure could be decreased. 5.It is possible to construct the fabric retained earth wall by the plastic fabric filter only. And the reinforcing effect between the steel plate and the plastic fabric filter is not largely different. however, in the aspect of the economic durability, the plastic fabric filter is more advantageous. 6.The reinforcing action mainly depends on the width and the length of the reinforcing materials, if possible, the full width is advantageous to enlarge the contact area with backfill. but considering the economic aspect, it is neccessary to develop the method controlling the space of the strip.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.1
• /
• pp.24-32
• /
• 2004

A mathematical model is used to investigate nitrogen dynamics in the intensive aquaculture ponds in the western coast of Korea. Parameters associated with water quality, sediments and growing of shrimp (Fenneropenaeus chinensis) are measured to calibrate the model for feeding ponds A and B and storage ponds. The model describes the fate of nitrogen including loadings of ammonia from feeds, phytoplankton assimilation, nitrification, sedimentation, volatilization and discharge. The model obtains good agreements with the measured values of TAN $(NH_4,\;NH_3),\;NO(NO_2,\;NO_3)$ and Chl (chlorophyll a). Impacts of water exchange on TAN and Chl are investigated, showing that the range of 0.01-0.2 (/day) cannot effectively reduce TAN but reduces Chl. Nitrogen in the ponds A is removed by sedimentation $66\%,$ volatilization $8\%,$ discharge of particulate and dissolved $8\%.$ The pond B shows $56\%\;and\;26\%$ of sedimentation and volatilization, respectively, to yield $10\%.$ decrease and 8c/o increase compared to those in the pond A. While the pond A has larger area (1.02:0.66 ha) and same stocking density (0.025 md./L) at the beginning of culture, the pond B obtains higher stocking density (0.0065:0.0091 md./L), longer feeding period (103:121 day) and resultant higher shrimp production (1.15:2.13 t/ha/cycle) at harvest. This is possibly due to the hydraulic characteristics driven by paddlewheels. At low ratio of the low speed area and the pond area, the rate of sedimentation is high, while the rate of gas exchange is low. Thus, the measurement and model analysis suggest that water quality and shrimp production are positively correlated with the hydraulic characteristics in the shrimp ponds.

• The Korean Journal of Malacology
• /
• v.28 no.3
• /
• pp.187-196
• /
• 2012

Recently, for the purpose of constructing artificial ecosystem, the public aquarium and experimental mesocosm systems are receiving attention. To design and establish an aquarium and mesocosm system, there is need of several materials for simulating the environment, such as sediments, rocks, and plants. Expecially for sessile mollusks, there must be proper materials to which sessile invertebrates can adhere. Nowadays, many aquariums and mesocosm systems are using dead coral skeletons for sessile mollusks. This study was proceeded to have data on the effect of dead coral skeletons on water qualities with the experiment on the environmental factors. For this purpose, I made glass tank for experiment, chose two types of dead coral skeletons imported from the Indonesia and observed the change of water qualities and decomposition efficiency of TAN (total ammonia-nitrogen), nitrite ($NO_2{^-}$) and nitrate ($NO_3{^-}$). As a result, the lager the surface area was, the more TAN, nitrite and nitrate decomposition rate increased. In addition, coral skeletons covered with crustose algae and bacteria in the tank showed faster TAN, nitrite and nitrate removal rate and stabilization. Accordingly, this experiment suggested that dead coral skeletons could be used as a sub filter for the closed system as well as an adhering plate.