Shin, Eun Jeong;Ha, Hun Joo;Shin, Wan Gyoon;Park, Kwang Jun
Korean Journal of Clinical Pharmacy
/
v.15
no.1
/
pp.27-33
/
2005
This study was intended to contribute towards the development of proper drug use system for pediatric patients by investigationg problems related to their medication and identifying drugs that need to be developed into low dosage tab-lets or syrups for pediatric use based on our analysis on the prescriptions for pediatric inpatients from 22 hospitals in South Korea on a day of Feb. 2003. The usage rates in the proportion of less than 0.5 and 1 per unit of oral solid formulation were $29.9{\%}$ and $54.3{\%}$ in hospitals with 1000 beds or more, 36.5 and $60.6{\%}$ in hospitals with 500 to less than 1000 beds, $60.8{\%}$ and $81.6{\%}$ in hospitals with less than 500 beds. Of the 63 oral solid formulation products that were used two or more times in the proportion oi less than 0.5 units, 34 products ($54.0{\%}$) were used as such despite the fact that syrups and lower dosage tablets or capsules were available in the market, and 24 products ($38.1{\%}$) so even when syrup formulations were available. Therefore, it would be desirable that pharmacist communities in charge of dispensing identify the most frequently crushed drugs or those that require special attention in choosing dispensing powders or solutions and develop dispensing guidelines that can be adopted by pharmacists in practice. Moreover government-led policies are needed to encourage development and manufacture of the formulations for pediatrics and to correct unsound prescription and dispensing practices such as using crushed forms of certain oral solid formulations although alternative formulations are available in the market.
The present study evaluated the manual dexterity and usability of conductive gloves when operating touchscreen devices in the cold. Twelve male subjects (23.3±1.5 years in age) participated in three experimental conditions: no gloves, fabric conductive and lambskin conductive gloves. Manual dexterity was tested using both Purdue Pegboard (PP) and ASTM dexterity tests at an air temperature of 5℃ and air humidity of 30%RH. Glove usability was tested through the following touchscreen tests: tap, double tap, long tab, drag, flick, and multi-touch. The results showed that manual dexterity according to the PP (2.5 mm of a pin diameter) and ASTM tests (8 mm of a stick diameter) was worse for the two glove conditions than for the no glove condition (p<.005). PP dexterity was better for the fabric glove condition than for the lambskin glove condition (p<.05); however, there was no difference in ASTM dexterity between the two glove conditions. Hand and finger skin temperatures were higher for the glove conditions than the bare hand condition (p<.05), with no differences between the two glove conditions. The touchscreen usability was the best for the no glove condition, followed by fabric gloves (p<.05). Wearing either fabric or lambskin gloves diminishes hand dexterity while maintaining hand and finger temperatures at higher levels. For improved hand dexterity in dealing with small numbers, letters on a touchscreen in cold environments, we recommend wearing fabric conductive gloves rather than lambskin conductive gloves.
Kim, Chang-Kyoon;Choe, Jae-Ho;Im, Young-Jae;Jung, Eui-S.
Journal of the Ergonomics Society of Korea
/
v.29
no.5
/
pp.771-782
/
2010
Today, the number of elderly drivers who use navigation is increasing with the growing number of elderly drivers. The purpose of this study is to provide guidelines on the interface of car navigation for elderly users. To extract significant factors which were distinguished between young and elderly users, both young and elderly users executed the driving test by installing two car navigation alternatives. The analysis was conducted through t-test. The results show that significantly different factors were the number and the meaning of the menu items in the initial screen, the location and the meaning of the menu icons in the map screen, the ease of search of the menu and the text size in the menu screen. Improvements for the factors of the initial screen and map screen were made with reference to ergonomic guidelines, and suggested through experiments comparing design alternatives for the menu screen. Design alternatives were made through a combination of investigative variables, and the analysis was conducted through ANOVA. The results show that Alternative 7 (the location of the tab was placed at the bottom, menu representation was done with the text font size of 18pt and the location of menu navigation icons was shown at the upper left) was preferred in terms of user's preference and the execution time. So if the suggested menu for elderly users are added to the existing design, both users will satisfy their desires. The guidelines suggested in this study will help the designer of car navigation take elderly users into consideration.
Journal of the Korea Institute of Information and Communication Engineering
/
v.10
no.10
/
pp.1773-1778
/
2006
This paper propose the method of constructing the Digital Logic Systems based on the Improved Automatic Theorem Proving Techniques(IATP) over Finite Fields. The proposed method is as following. First, we discuss the background and the important mathematical properties for Finite Fields. Also, we discuss the concepts of the Automatic Theorem Proving Techniques(ATP) including the syntactic method and semantic method, and discuss the basic properties for the Alf. In this step, we define several definitions of the IAIP, Table Pseudo Function Tab and Equal. Next, we propose the T-gate as Building Block(BB) and describe the mathematical representation for the notation of T-gate. Then we discuss the important properties for the T-gate. Also, we propose the several relationships that are Identity relationship, Constant relationship, Tautology relationship and Mod R cyclic relationship. Then we propose Mod R negation gate and the manipulation of the don't care conditions. Finally, we propose the algorithm for the constructing the method of the digital logic systems over finite fields. The proposed method is more efficiency and regularity than my other earlier methods. Thet we prospect the future research and prospects.
Journal of the Korea Institute of Information Security & Cryptology
/
v.23
no.3
/
pp.479-490
/
2013
Recently, the number of attacks by malicious application has significantly increased, targeting Android-platform mobile terminal such as Samsung Galaxy Note and Galaxy Tab 10.1. The malicious application can be distributed to currently used mobile devices through open market masquerading as an normal application. An attacker inserts malicious code into an application, which might threaten privacy by rooting attack. Once the rooting attack is successful, malicious code can collect and steal private data stored in mobile terminal, for example, SMS messages, contacts list, and public key certificate for banking. To protect the private information from the malicious attack, malicious code detection, rooting attack detection and countermeasure method are required. To meet this end, this paper investigates rooting attack mechanism for Android-platform mobile terminal. Based on that, this paper proposes countermeasure system that enables to extract and collect events related to attacks occurring from mobile terminal, which contributes to active protection from malicious attacks.
Agglutination is one of the most commonly employed reactions in clinical diagnosis. In this paper, we have designed and fabricated nickel mold insert for injection molding of a microfluidic lab-on-a-chip for the purpose of the efficient detection of agglutination. In the presented microfluidic lab-on-a-chip, two inlets for sample blood and reagent, flow guiding microchannels, improved serpentine laminating micromixer(ISLM) and reaction microwells are fully integrated. The ISLM, recently developed by our group, can highly improve mixing of the sample blood and reagent in the microchannel, thereby enhancing reaction of agglutinogens and agglutinins. The reaction microwell was designed to contain large volume of about $25{\mu}l$ of the mixture of sample blood and reagent. The result of agglutination in the reaction microwell could be determined by means of the level of the light transmission. To achieve the cost-effectiveness, the microfluidic lab-on-a-chip was realized by the injection molding of COC(cyclic olefin copolymer) and thermal bonding of two injection molded COC substrates. To define microfeatures in the microfluidic lab-on-a-chip precisely, the nickel mold inserts of lab-on-a-chip for the injection molding were fabricated by combining the UV photolithography with a negative photoresist SU-8 and the nickel electroplating process. The microfluidic lab-on-a-chip developed in this study could be applied to various clinical diagnosis based on agglutination.
Journal of the Korea Organic Resources Recycling Association
/
v.13
no.2
/
pp.98-106
/
2005
Population dynamics in the vermicomposting bed was investigated. And harvesting efficiencies of earthworm attracting traps with different attractants, mesh sizes of net and covering materials was evaluated. Peak density of earthworm population was $5kg/m^2$ and therafter its desity kept $4.4{\sim}5.0kg/m^2$. It was evaluated that suitable mesh size of the net was 7mm and proper covering materials of the earthworm attracting trap was cotton quilt. The earthworm harvesting efficiency of trap with attractant was much higher than that of trap without attractant. With more amount of attractant in the trap and with longer setting period of trap onto the vermicomposting bed, the earthworm attracting trap harvested more earthworms. Crushed pear-peel attracted much more earthworms than paper mill sludge, but it was difficult to supply enough amount of crushed pear-peel for practical need. Sugar solution(10%) with tab water was proven to be an alternative to crushed pear-peel because its attracting effect on earthworm was as high as crushed pear-peel and it was easy to prepare and supply in large quantity.
This study aims to examine the early use of Da-bo tap and their transformation by analyzing the various meanings of the term pagoda in Chinese translations, the Sanskrit version of the Lotus Sutra, as well as Dabotap in the Mogao Caves of Dunhuang. In addition, we aim to highlight changes in Dabotap usage, which started out as residential spaces, but transformed into burial spaces over time. The details can be summarized as follows. First, early Buddhist monuments were usually either pagodas serving as burial places for the dead or shrines that were not. A Dabotap is a type of pagoda enshrining the body of Prabhutaratna, and was initially used as a residential space, rather than a burial place for the dead. Second, the terms stupa and caitya are clearly distinguished from each other in the Sanskrit scriptures, and stupa is also further classified into dhatu, sarisa, and atmabhava based on the object being enshrined. In Gyeon-bo-tab-pum, the preconditions for caitya to transform into stupa is presented by explaining that worshipping the space enshrining the body of Prabhutaratna is worthy of the same status as the space enshrining sarira. Third, the Mogao Caves of Dunhuang had been depicted from the Western Wei of the Northern Dynasties until the time of the Yuan Dynasty. It was used as a residential space until the early Sui Dynasty, but was used as both residence and burial places until the Tang Dynasty when pagodas were first being constructed with wheel or circles forms on top, which then gradually changed into stupa (grave towers).
Computer vision technology is a component inspection to obtain a video image from the camera to the machine to perform the capabilities of the human eye with a field of artificial intelligence, and then analyzed by the algorithm to determine to determine the good and bad of production parts It is widely applied. Shape inspection method was used as how to identify the location of the start point and the end point of the search range, measure the height to the line scan method, in such a manner as to determine the presence or absence of the bolt tabs average brightness of the inspection area in a circular scan type value And the degree of similarity was calculated. The total time it takes to test in the test performance tests of two types of bolts tab enables test 300 min, and demonstrated the accuracy and efficiency of the inspection on the production line represented a complete inspection accuracy.
PURPOSE. The purpose of this study was to evaluate the repeatability and matching accuracy between two identical intraoral spectrophotometers. MATERIALS AND METHODS. The maxillary right central incisor, canine, and mandibular left central incisor of each of 30 patients were measured using 2 identical intraoral spectrophotometers with different serial numbers (EasyShade V). The color of each shade tab from 3 shade guides (VITA 3D-Master) was also determined with both devices. All measurements were performed by a single operator. Statistical analyses were performed to verify the repeatability, accuracy, and the differences between the devices with paired t-tests, one-way ANOVA, and intra-class correlation coefficients (ICCs) (${\alpha}=.05$). RESULTS. A high level of measurement repeatability (ICC>0.90) among $L^*$, $a^*$, and $b^*$ color components was observed within and between devices (P<.001). Intra-device matching agreement rates were 80.00% and 81.11%, respectively, while inter-device matching agreement rate was 51.85%. ANOVA revealed no significant different color values within each device, while paired t-test provided significant different color values between both devices. The CIEDE2000 color differences between both devices were $2.28{\pm}1.61$${\Delta}E_{00}$ for in-vivo readings. Regarding the clinical matching accuracy of both devices, ${\Delta}E_{00}$ values between teeth and matching shade tabs were $3.05{\pm}1.19$ and $2.86{\pm}1.02$, respectively. CONCLUSION. Although two EasyShade V devices with different serial numbers show high repeatability of CIE $L^*$, $a^*$, and $b^*$ measurements, they could provide different color values and shade for the same tooth.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.