• 한국정보시스템학회지:정보시스템연구
• /
• 제29권2호
• /
• pp.71-94
• /
• 2020

Purpose With the development of Social Network Service(SNS) and mobile devices, many companies have been using the Facebook as a Word-of-Mouth(WOM) channel. This study examines the effects of psychological distance and message type on WOM using the Facebook's real messages. And the moderating effect of the message type on the relationship between psychological distance and WOM was also analyzed. Design/methodology/approach A content analysis was used as a research method. A total 7,483 messages were collected from 50 companies' Facebook Fanpage (based on the ranking of socialbakers.com) and content analysis was conducted using human coding. As the influencing variables, the message type and psychological distance and the number of 'Likes', 'Share', and 'Comment' were used as the dependent variable. The R3.4.4 was used to perform descriptive statistics, cross-tab analysis, and analysis of variance(ANOVA). Findings First, a larger proportion of Facebook messages have close psychological distance for all message types(information, advertisement, event, and customer relationship). Second, 'Like' and 'Comment' number were significantly higher in messages of close psychological distance. Third, the effects of psychological distance on 'Like', 'Share', and 'Comment' number were different according to message type. However, 'advertisement' message type had significantly more numbers for all WOMs('Like', 'Share', and 'Comment') in messages with close psychological distance.

• 한국의상디자인학회지
• /
• 제15권1호
• /
• pp.191-206
• /
• 2013

Nowadays consumers have begun to have interest in eco-friendliness, and re-design is being highlighted as a fashion alternative for consumers with interest in ethical consumption. This study established the concept of re-design fashion as a way to practice eco-friendly design and analyzed various re-design fashions with four types. And it also analyzed decorative and structural details being often employed for re-design. This study intends to suggest new alternative fashion in order to develop re-design fashion design that can satisfy both eco-friendliness and practicality. The results of the research are as follows: First, according to the result of analyzing re-design fashion types, they can be divided into the types of developing new products through combination of decorative details, combination of structural details, development of new fabric through fabric reconstruction, and reconstruction to different products. Second, according to the result of examining the details that can be used to develop new re-design fashion products, pleats, shirring, tuck, peplum, or tab's decorative details and neck-line, collars, sleeves, cuffs, or pocket's structural details are utilized often. Third, total seven recycled clothes were used to design three works taking decorative and structural details. Through this, the study suggests re-design fashion products that can solve environmental pollution resulted from wastes of clothes.

• Human Ecology Research
• /
• 제56권3호
• /
• pp.217-232
• /
• 2018

This study analyzes the determining factors of the digital divide index in married female immigrants based on panel data from the National Information Society Agency (2016). There were 287 participants, all of whom owned a smartphone. The study divided the consumer groups into three age groups: 20-29, 30-39, and 40-49 years. SPSS 19.0 was used to statistically analyze the results. The findings of the analysis were described using frequency, descriptive, cross-tab, ANOVA, correlation, and multiple regression analysis. The findings of this research are as follows. First, nationality, acquisition of Korean nationality, and duration of living in Korea were significantly different among the three groups. Second, digital competency and online service usage were also significantly different among the three groups. Third, PC usage ability, mobile usage ability, and diversity of online usage significantly influenced the digital divide index in all age groups. Fourth, residential duration in Korea significantly decreased the digital divide index for groups in their 30s and 40s. Fifth, Loneliness significantly increased the digital divide index for groups in their 20s. Sixth, depression significantly increased the digital divide index for groups in their 30s. The study will help to further understand age-related differences and the digital divide of married female immigrants.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.319-323
• /
• 2003

In this paper, we propose a hybrid transceiver for underwater acoustic communication, which allows the system to reduce complexity and increase robustness in time variant underwater channel environments. It is designed in the digital domain except for amplifiers and implemented by using a multiple digital signal processors (DSPs) system. The digital modulation technique is quadrature phase shift keying (QPSK) and frame synchronization is an energy (non-coherent) detection scheme based on the quadrature receiver structure. DSP implementation is based on block data parallel architecture (BDPA). We shaw experimental results in th? underwater anechoic basin at KRISO. The results indicate that the frame synchronization is performed without PLL. Also, we shaw that the adaptive equalizer can compensate frame synchronization error and the correction capability is dependent on the length of equalizer.

• 대한전기학회논문지
• /
• 제45권4호
• /
• pp.562-567
• /
• 1996

A new lateral MOS controlled thyristor, named Shorted Anode LMCT(SA-LMCT), is proposed and analyzed by a two-dimensional device simulation. The device structure employs the implanted n+ layer which shorts the p+ anode together by a common metal electrode and provides a electron conduction path during turn-off period. The turn-off is achieved by not only diverting the hole current through the p+ cathode short but also providing the electron conduction path from the n-base into the n+ anode electrode. In addition, the modified shorted anode LMCT, which has an n+ short junction located inside the p+ anode junction, is also presented. It is shown that the modified SA-LMCT enjoys the advantage of no snap-back behavior in the forward characteristics with little sacrificing of the forward voltage drop. The simulation result shows that the turn-off times of SA-LMCT can be reduced by one-forth and the maximum controllable current density may be increased by 45 times at the expense of 0.34 V forward voltage drop as compared with conventional LMCT. (author). 11 refs., 6 figs., 1 tab.

• 대한전기학회논문지
• /
• 제45권1호
• /
• pp.1-8
• /
• 1996

Recently, much attention has been paid to problems which is concerned with voltage instability phenomena and much works on these phenomena have been made. In this paper, by substituting d $P_{k}$ d $e_{k}$ ( $v^{\rarw}$= e +j f) for $P_{k}$ in conventional load flow, direct method for finging the limit of voltage stability is proposed. Here, by using the fact that taylor se- ries expansion in .DELTA. $P_{k}$ and .DELTA. $Q_{k}$ is terminated at the second-order terms, constraint equation (d $P_{k}$ d $e_{k}$ =0) and power flow equations are formulated with new variables .DSLTA. e and .DELTA.f, so partial differentiations for constraint equation are precisely calculated. The fact that iteratively calculated equations are reformulated with new variables .DELTA.e and .DELTA.f means that limit of voltage stability can be traced precisely through recalculation of jacobian matrix at e+.DELTA.e and f+.DELTA.f state. Then, during iterative process divergence may be avoid. Also, as elements of Hessian mat rix are constant, its computations are required only once during iterative process. Results of application of the proposed method to sample systems are presented. (author). 13 refs., 11 figs., 4 tab.

• International Journal of Automotive Technology
• /
• 제6권2호
• /
• pp.125-131
• /
• 2005

This article reports the experimental and numerical results for free sprays under ultra-high injection pressure conditions to give us better understandings of spray characteristics and also to make clear a limit pressure condition in diesel sprays. The high pressure injection system developed in this work is devised to reach ultra-high pressure conditions in the range from 150 MPa to 355 MPa. The free spray injected from a single nozzle injector is visualized by the Schlieren technique and the high speed camera. In particular, it is found that the shock waves are present and propagated along the edge of spray in the downstream direction. The measured spray penetration length increases gradually with the injection pressure, but its increasing rate is decreased as the injection pressure increases. The Sauter mean diameter is also no longer augmented for the injection pressures higher than 300 MPa. In addition, the three­dimensional numerical simulations are conducted for comparing the measurements with the predictions based on two different breakup models. The TAB model results show better agreements with experimental data than the WAVE model under ultra-high injection pressure conductions. Moreover, the simulation results show that the gas-phase pressure increases substantially in the vicinity of the spray tip region. It supports the experimental observation that the shock waves are formed at the front of spray tip and are propagated downstream.

• 한국표면공학회지
• /
• 제26권3호
• /
• pp.149-157
• /
• 1993

In the study of TAB(Tape Automated Bonding)technologies, Cu-Cr sputtered seed layer has been used to improve the adhesion between Polyimide and Cu film and electrical properties. But the Cu electrodeposit on Cu-Cr film had poor adhesion or powder-like form due to the surface Cr oxides on the Cu-Cr film. By means of activating the Cu-Cr film with the oxalic acid and phosphoric acid, the Cu film with the improved adhesion could be coated on the Cu-Cr sputtered film in CuSO4 solution. The etching rate was compared with increasing the Cr content of the sputtered Cu-Cr film, and anodic polarization curve in FeCl3 solution was investigated. With increasing the Cr content, the etching rate was reduced. The clean etching cross section could be obtained with increasing the concentration of FeCl3 solution. But above the 13 w/o Cr content, Cu-Cr sputtered film could not bed etched cleanly only with FeCl3 solution and additives were needed.

• 한국임상수의학회지
• /
• 제28권5호
• /
• pp.519-521
• /
• 2011

1살령 Goffin cockatoo (Cacatua goffini)가 경부 주변의 부드러운 무통성의 풍선 모양 종괴를 주증으로 내원 하였다. 문진과 신체 검사를 통해 두경부 기낭의 외상에 의한 피하 기종으로 진단하였으며, 이를 방사선 검사로 확인 하였다. 피하 탭이 성공적이지 못하여, 변경된 시린지를 이용한 스텐트를 장착하였다. 장착 2주 간 부작용은 나타나지 않았으며 스텐트의 수술적 제거 후, 피하 기종은 소실되었다.

• Journal of Welding and Joining
• /
• 제31권6호
• /
• pp.58-64
• /
• 2013

Several joining methods involving resistance welding, laser welding, ultrasonic welding and mechanical joining are currently applied in manufacturing lithium-ion batteries. Cu and Al alloys are used for tab and bus bar materials, and laser welding characteristics for these alloys were investigated with similar and dissimilar material combinations in this study. The base materials used were Al 1050 and oxygen-free Cu 1020P alloys, and a disk laser was used with a continuous wave mode. In bead-on-plate welding of both alloys, the joint strength was higher than the strength of O tempered base material. In overlap welding, the effect of welding parameters on the tensile shear strength and bead shape was evaluated. Tensile shear strength of overlap welded joint was affected by interfacial bead width and weld defect formation. The tensile-shear specimen was fractured at the heat affected zone by selecting proper laser welding parameters.