• Resources Recycling
• /
• v.9 no.6
• /
• pp.36-44
• /
• 2000

Fly ash was composed of the unburned carbon and mineral particles. The former was able to attach on the bubbles, while the latter was not. Therefore, it was possible to separate the unburned carbon and the mineral from fly ash using the froth flotation process. This study was carried out to evaluate the separation efficiency as a function of the ny ash particle properties in the column flotation. Separation efficiency was analyzed for various size fraction of -38 fm,38~125 fm and 1125 W, and for various fly ash samples containing 7, 11, and 20 wt% unburned carbon. For the size fractions of -38 fm containing 7 wt% unburned carbon, separation efficiency was 86ft, whereas separation efficiency was found to be 74% for the size fraction of +125$\mu\textrm{m}$ containing 20 wt% unburned carbon. The results indicated that separation efficiency increased with the decrease in the particle size and the unburned carbon content of the fly ash.

• Analytical Science and Technology
• /
• v.26 no.4
• /
• pp.287-297
• /
• 2013

The optimization of analytical method for the thermal desorption of seven VOCs (volatile organic compounds) by TD-GC/MS (thermal desorption-gas chromatograph-mass spectrometer) with solid phase sorbent tube, and comparative analysis for the determination of VOCs plotted by standard sorbent tubes prepared using both gas phase and liquid phase materials were investigated. The result of paired t-test showed that a liquid phase standard sorbent tube method was in agreement with a gas phase standard sorbent tube method for six species of VOCs including benzene, toluene, ethylbenzene, o-, m-, and p-xylene except for styrene at the significance level (${\alpha}=0.01$), while the 15.6% of difference in response factor between both of gas phase and liquid phase standard plotting for the determination of styrene showed that both methods were significantly different at the significance level. Therefore, the liquid phase standard plotting method was employed to reduce erroneous data for the determination of styrene including BTEX. Under the optimized analytical method by liquid phase standard sorbent tube, recovery was between $100{\pm}5%$ for 7 species of VOCs, reproducibility ranged from 0.3 to 7.7%, and method detection limit (MDL) ranged from $0.01{\mu}g/m^3$ for o-xylene to $0.27{\mu}g/m^3$ for toluene. The optimized standard method was applied to determine VOCs VOCs from indoor air of of dormitory, one bedroom apartment, and a new car.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.4
• /
• pp.661-678
• /
• 1993

The purpose of this study was to analyze the stress distribution at supporting bone according to the types of endosseous implants. This investigation evaluated the stress patterns in rectangular photoelastic models produced by four different types of dental implants such as $Br\ddot{a}nemark$, screw type of Steri-Oss, blade type of Steri-Oss, IMZ with IMC and resin tooth using the techniques of quasi-three dimensional photoelasticity. All prostheses were casted in the same nonprecious alloy and were cemented or screwed on their respective implants and abutments. 20 kg of vertical load was applied on the central fossa of casted crown and 16 kg of inclined had was applied on the top third of distal surface of casted crown respectively. The results were as follows : 1. Under the vertical load, screw implants of Steri-Oss and $Br\ddot{a}nemark$ showed increasing stress condition between and around the screw threads along the implant lateral surface and cylindrical implant of IMZ showed the less stress condition along the lateral surface with concentration of stress mostly near the root apex. 2. Under the vertical load, the stress of Steri-Oss blade was distributed uniformly at the alveolar bone under the broad blade. 3. Under the inclined load, the stress concentration of Steri-Oss screw and $Br\ddot{a}nemark$ was developed highly around the mesiocervical bone area on the contralateral side to force application. The stress of $Br\ddot{a}nemark$ with flexible gold glod was more concentrated in the cervical bone area than that of Steri-Oss with stiff screw. 4. Under the inclined load, the stress of Steri-Oss blade broadly was distributed around the mesioceivical bone area and the lower and mesial bone area of the blade. 5. Under the Inclined load, IMZ implant showed the gap between c개wn and fixture due ta deformation of the IMC and IMZ was lower in stress concentration developed around the mesiocervical bone area than $Br\ddot{a}nemark$ and Steri-Oss screw. 6. Under the inclined load, the stress magnitude induced in the mesiocervical bone area of implants was in order of $Br\ddot{a}nemark$, Steri-Oss strew, IMZ and Stsri-Oss blade. 7. Tilting forces as compared to axial forces exerted greater magnitude of stress in the cervical bone area of the implant. 8. In respect of stress distribution, Steri-Oss blade was superior than any other implants and in respect of the stability by horizontal lone, IMB and $Br\ddot{a}nemark$ was inferior than any other implants.

• Journal of Periodontal and Implant Science
• /
• v.23 no.1
• /
• pp.109-126
• /
• 1993

Refractory periodontitis manifest progressive attachment loss in a rapid and unrelenting manner regardless of the type or frequency of therapy applied. The purpose of this study was ta evaluate the relation between the level of cytokines in GCF and periodontopathic microflora with disease activity of refractory periodontitis. Selection of patients with refractory periodontitis (7 males, 3 females) were made by long term clinical observation including conventional clinical history and parameters. Teeth that showed pocket depth greater than 6mm were selected as sample teeth. Subjects were examined at baseline and after 3 months. Prior to baseline test, individual acrylic stent was fabricated. Reference grooves were made on each sample tooth site. Pocket depth and attachment loss were measured by Florida Probe. Gingival index was measured at 4 sites each sample teeth. Disease activity was defined as attachment loss of ${\ge}$ 2.1mm, as determined by sequential probing and tolerance method. The pattern and amount of alveolar bone resorption was observed with quantitative digital subtraction image processing radiography. Morphological analysis of subgingival bacteria was taken by phase contrast microscopy. Predominant cultivable bacterial distribution and frequency were compared between disease-active and disease-inactive site using immunofluorescence microscopy and selective microbial culturing. Levels of $interleukin-l{\beta}$, 2, 4, 6 and $TNF-{\alpha}$ in GCF and blood serum sample were quantified by ELISA. In active sites, P. intermedia was significantly increased to compare with inactive site. $IL-1{\beta}$, IL-2, IL-6 and $TNF-{\alpha}$ in GCF were increased in active sites and IL-2 in serum was increased in active patients significantly. Alveolar bone loss in active site was correlated with $IL-1{\beta}$, IL-2 in GCF. And loss of attachment in active site was correlated with IL-2 in GCF. These results demonstrate that IL-2 in serum, $IL-1{\beta}$, IL-2, IL-6 and $TNF-{\alpha}$ in GCF, P, intermedia might be used as possible predictors of disease activity in refractory periodontitis before it is clinically expressed as attachment loss and quantitative alveolar bone change.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.5
• /
• pp.754-763
• /
• 2018

The maritime ICT-convergence equipment are essentially required to a type approval (TA) certification that needs environmental and functional tests, to install in vessel. The environmental test is to experiment the possession for required durabilities of the target device in maritime environment, and the functional test is to check the required functions of target equipment based on international standard. In Korea, the environmental testing facilities amount to 227 sites, but there is no functional testing facility. Because of this, we establish a function test facility for the maritime ICT-equipment. In this paper, we analyze and design the functional testing requirement and required interlocking simulators for digital interfaces and navigation communication equipment. We propose the 2-steps of functional testing procedures, which are single test and integration test, to improve the reliability of testing result. The single test is to examine own functions of the target device, and the integration test is to check harmonized operation with other navigation and communication devices.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.525-536
• /
• 2020

The study data used for the analysis of this study were obtained from the raw data during the 1st survey of the 2nd wave of the 2019 Panel Survey on the Employment of Persons with Disabilities conducted by the Korea Employment Agency for Persons with Disabilities. The results showed that, for regular workers, when there was a fixed term of employment contract, it was more likely that the job was retained for 12 months or longer. For the day laborers, workers without a fixed-term employment contract were more likely to retain their jobs for 12 months longer. This suggests that owing to the types of jobs that did not consider disabilities, people with disabilities were facing difficulties in terms of the options available in their job choices and their self-decisions. Therefore, the state would have to develop more job types and skills for these individuals to expand their career options. The growth in the employment of people with disabilities by small businesses that hire day laborers will depend on the diversification of the employment subsidy, which is again dependent on the size of the businesses.

• Journal of the Korean association of regional geographers
• /
• v.17 no.6
• /
• pp.710-725
• /
• 2011

The purpose of this study is to analyze both residential conditions and the resident impressions of the transition zone of central Daegu. The results drawn from a questionnaire survey of the residents are summarized as follows: 1) The proportion of people over the age of 60 living on a low income is high and consists mostly of retired citizens who have lived in the transition zone, in their own homes, for an extended length of time 2) The condition of infrastructure in the transition zone is very poor, however, despite the housing deterioration, the internal repair and maintenance of houses is more satisfactory than their external appearance. 3) Residential satisfaction received high ratings in every category except pollution and housing price. This response appears to stem from the easy commute of residents as well as the ready availability of facilities in the city center. 4) In terms of residential satisfaction, the residents can be divided into two groups. The first, with a high satisfaction rate, consists mainly of senior citizens who possess both personal homes and a stable living, having resided in the city center for most of their lives. The second, with a lower satisfaction rate, is composed mostly of younger residents who have lived temporarily in inexpensive rental homes. As a results, the residential area in the transition zone of central Daegu does not appear to be a problematic area like the slum of the West, but instead a stable settlement for its residents.

• Journal of Nutrition and Health
• /
• v.20 no.6
• /
• pp.395-404
• /
• 1987

A nutritional quality and rancidity of marketed korean traditional foods were assessed. That is, basic chemical analysis were done in Galbi-tang, Sullung-tang, Pibimbap, Pulkogi and Naeng Myon. Ca and P for the Galbi-tang and Sulung-tang and vitamin C for the Pibimbap were analyzed. Chemical analysis were done in Gangjung 4, Sanja 1, Parksan 6, Yoomilkwa, 4 out of korean traditional cookies. Amounts of energy and protein in Galbi -tang and protein and Ca in Sullung -tang are more than the recommended allowance at ta meal. Amounts of Ca in Galbi-tang and energy in SUllung-tang are less than the recommended . The amounts of energy and protein in Pibimbap, Pullkigi and Naeng Myon Except protein in Pullkogi are short of the recommended at a meal. And amounts of vitamin C in Pibimbap are short of the recommended, too. The content of carbohydrate in Korean traditional cookies is the highest one comparing to others. Contents of crude fat in Gangjung Parksan and Dasik which are made up of sesame, black sesame and pine nuts are higher than that of other Korean traditional cookies. Acid value and peroxide value in all Gangjung, Yoomilkwan and Sanja except the peroxide value in one Sanja product, are not in the excess of standard of peroxide value and acid value. The standard are 600meq/kg and 3 for peroxide value and acid value respectively in oil treated foods.

• Korean Journal of Psychosomatic Medicine
• /
• v.13 no.1
• /
• pp.32-40
• /
• 2005

Objectives : This study looked at the symptoms of alexithymia in schizophrenia and their association with clinical variables and schizophrenic symptomatology. Methods Consecutive fifty eight inpatients with DSM-IV diagnoses of schizophrenia completed 26item version of Toronto Alexithymia Scale (TAS), Symptom Checklist-90-Revised(SCL-90-R), and Positive and Negative Syndrome Scale(PANSS). Results : Authors did not find any correlation between scores of PANSS and TAS. However, all the subscale scores of SCL-90-R were significantly correlated with total score of TAS. Also, 'difficulty identifying and deistinguishing between feelings and bodily sensations' and 'difficulty describing feelings' significantly correlated with SCL-90-R subscale scores. 'Reduced daydreaming' had mixed findings and 'externally oriented thinking' did not correlate. Multiple regression model included Global Severity Index of SCL-90-R accounting 28.2% of variance for TAS scores. Conclusion : These findings together with discrepancy in results between objective and subjective tests suggest that alexithymia in schizophrenia may have two constructs, 'difficulty to describe and communicate feelings(state)' and 'externally oriented thinking(trait)' Authors suggest further study needs to confirm construct validity of TAS in this population.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.3
• /
• pp.299-320
• /
• 2008

We study on the astronomical calendars that was used in the Silla era. The calendars are deduced from the records in Samguksagi. They were influenced from calendaric system of Tang Dynasty, which are Lin duk calendar(麟德曆), Ta yen calendar(大衍曆) and Sun myung calendar(宣明曆). We analyse them in detail according to the time and duration of use. Water clock system of Unified Silla was used four water vessels for supplying water. We found the model from documents on ancient water clock that are appeared in the old Korean, Chinese and Japanese historical records. We have assumed the model of Unified Silla clepsydra is similar type with Chinese records during Tang dynasty and with Japanese reconstructed water clock in Temple Asoka. After fluid dynamic experiment, we decide the suitable diameter of supplying pipe and volume of the vessels used in the clepsydra. We introduce the experimental instruments and methods for accomplishing the clock. We designed and reconstructed the water clock of Unified Silla and float rods for measuring time, that is based on the Silla's calendaric system.