• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.1
• /
• pp.37-43
• /
• 2020

This study was conducted to evaluate the effects of different nitrogen levels on the yield and nutrient quality of a newly developed domestic hybrid of Teosinte, Geukdong 6〔Zea mays L. subsp. mexicana (Schrad.) H. H. Iltis〕. The field experiment was conducted in a randomized block design with three replicates and consisted of four nitrogen (N) application rates, T1 (200 kg/ha), T2 (300 kg/ha), T3 (400 kg/ha), and T4 (500 kg/ha). No differences were found in plant length, leaf length, leaf width, leaf number, dead leaves, stem hardness, tiller number, and fresh yield (p>0.05). The T3 showed significantly greater dry matter yield at harvest (heading stage) compared to the other treatments (p<0.05). The crude protein content of T4 (10.49%) was higher than those of T1 and T2 (p<0.05). However, there was no significant difference between T4 (10.49%) and T3 (9.63%). The effects on crude fat, crude ash, neutral detergent fiber (NDF), acid detergent fiber (ADF), and crude fiber were not significant (p>0.05). The sugar content was higher in the T2 treatment than the other treatments (p<0.05). For Ca, T3 showed significantly greater content (p<0.05). However, no significant effects were found in the contents of Cu, Fe, K, Mg, Mn, Mo, and Zn (p>0.05). Na content was higher in order of T2 > T4 > T3 > T1 (p<0.05). Total mineral contents were not significantly different among the treatments (p>0.05). Given these results, we recommend the amount of nitrogen fertilization necessary for "Geukdong 6" to be around 400 kg per ha (T3), when considering, high fresh yield, dry matter yield, number of leaves and content of crude protein.

• Journal of Korea Multimedia Society
• /
• v.2 no.4
• /
• pp.468-475
• /
• 1999

Learning algorithm of SRNN doesn't use analytic maximum epoch, so that its performance is inefficient and its cost is high. In this paper, with the proper maximum epoch, we improve teaming efficiency. We first describe cost function of maximum epoch and computation time theoretically Then, using it, we propose that maximum epoch must be between 400 and 500. Estimated maximum epoch is verified by experiment.

• Transactions of Materials Processing
• /
• v.15 no.9 s.90
• /
• pp.673-678
• /
• 2006

Demands for micro parts have increased with recent advances in IT and machinery industries. However, the present technology loaves much to be desired to effectively produce parts with the volume of $1mm^{3}$ and less by mechanical method in large quantities. This paper provides a method for efficient quantity production of complete micro 3D structure using micro end-milling cutting process. The possibility has proven via manufacturing experiment of a multistage micro complex gear structure of $500{\mu}m$ in length, $500{\mu}m$ in maximum external diameter and a volume of $1mm^{3}$ and less.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.812-817
• /
• 2001

Impinging spray characteristics were investigated to find suitable injection pressure by using high pressure injection system. Spray radius and spray height were increased continuously until 2,500bar but the rate of enhancement was decreased suddenly over this injection pressure region. It is expected that the maximum suitable injection pressure of impinging spray exists at around 2,500bar.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.500-500
• /
• 2000

In this paper, we deal wit,11 a simple tim varying feedforward compensator in order to decrease the amount of undershoots and overshoots on the step response. This compensator makes the step type input be a ramp input with saturation for 0 $\leq$ t < $\alpha$. It will be shown that the system with the feedforward compensator has small amount of undershoot and overshoot at the price of rise time. Also, provided the system properly stable, the influence of the design parameter $\alpha$ on the step response of the system with the feedforward compensator is investigated in the current paper.

• Transactions of Materials Processing
• /
• v.8 no.6
• /
• pp.576-582
• /
• 1999

The high temperature behavior of Al 6061 alloy was characterized by the hot torsion test in the temperature ranges of 400∼550℃ and the strain rate ranges of 0.05∼5/sec. To decide optimum deformation condition, three types of deformation maps were individually made from the critical strain (εc). deformation resistance(σp) and deformation efficiency (η). The critical strain(εc) for dynamic recrystallization (DRX) which was decided from the inflection point of strain hardening rate(θ) - effective stress (σ) curve was about 0.65 times of peak strain (εp). The relationship among deformation resistance (peak stress, σp), strain rate (ε), and temperature (T) could be expressed by ε=2.9×1013[sinh(0.0256σp]7.3exp (-216,000/RT). The deformation efficiency (η)which was calculated on the basis of the dynamic materials model (DMM) showed high values at the condition of 500∼550℃, 5/sec for 100% strain. The results from three deformation maps were compared with microstructures. The best condition of plastic deformation could be determined as 500℃ and 5/sec.

• Journal of the Korean Electrochemical Society
• /
• v.6 no.3
• /
• pp.174-177
• /
• 2003

Electric double-layer capacitors based on charge storage at the interface between a high surface area activated carbon electrode and an electrolyte solution are characterized by their long cycle-life and high power density in comparison with batteries. However, energy density of electric double-layer capacitors obtained at present is about 6 Wh/kg at a power density of 500W/kg which is smaller as compared with that of batteries and limits the wide spread use of the capacitors. Therefore, a new capacitor that shows larger energy density than that of electric double-layer capacitors is proposed. The new capacitor is the hybrid capacitor consisting of activated carbon cathode, carbonaceous anode and an organic electrolyte. Maximum voltage applicable to the cell is over 4.2V that is larger than that of the electric double-layer capacitor. As a result, discharged energy density on the basis of stacked volume of electrode, current collector and separator is more than 18Wh/l at a power density of 500W/l.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.497-500
• /
• 1999

This paper reports on the fabrication and characteristics of recessed gate GaN MESFETs fabricated using a photoelectrochemical wet etching method. The unique etching process utilizes photo-resistive mask and KOH based etchant. GaN MESFETs with successfully recessed gate structure was characterized in terms of dc and RF performance. The fabricated GaN MESFET exhibits a current saturation at $V_{DS}$ = 4 V and a pinch-off at $V_{GS}$ =-3V The peak drain current of the device is about 230mA/mm at 300 K and the value is remained almost same for 500K operation. The $f_{T}$ and $f_{max}$ from the device are 6.357Hz and 10.25 GHz, respectively.y.y.

• Corrosion Science and Technology
• /
• v.5 no.3
• /
• pp.94-98
• /
• 2006

The next generation nuclear power reactor will use Pb-Bi as the cooling material. The steel structure materials such as HT-9 used in the reactor suffer from corrosion when they are exposed to high temperature Pb-Bi. Therefore corrosion should be prevented to use Pb-Bi as the coolant material without any safety problem. One method is to control the oxygen content in Pb-Bi. An appropriate amount of oxygen in Pb-Bi can produce a thin oxide layer on steel, and this layer protects the steel from corrosion attack. Since the required oxygen content in Pb-Bi is in the range of $10^{-5}$ to $10^{-7}$ wt%, this small oxygen content can be controlled by flowing a mixture of hydrogen gas and water vapor. The stagnant corrosion test of HT-9 samples was performed by controlling the oxygen content up to 2,000 hours. The corrosion behavior of HT-9 was analyzed at the temperatures of $500^{\circ}C$ and $650^{\circ}C$ with a reduced condition and a oxygen content of $10^{-6}$ wt%.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.1150-1152
• /
• 1993

$TiO_2-Nb_2O_5$ thin films are fabricated by Sol-Gel method and their electrical properties have been investigated. The crystalline form is amorphous under $400^{\circ}C$ and is anatase over $500^{\circ}C$. The surface conductivity of films is higher that of $500^{\circ}C$ than that of $600^{\circ}C$.