본 연구는 유치열과 영구치열에서 구개의 길이, 폭, 깊이 및 치열궁의 형태 등을 조사하여 남녀간의 차이와 유치열과 영구치열간의 변화양상을 파악하는 것이다. 유치열기 아동 100명과 영구치열기 성인 100명 총 200명을 대상으로 하여 상악 석고 모형을 채득하고 3차원 laser scanner(SD Scanner, DS4060, LDI, U.S.A.)를 통한 석고 모델의 측정을 통해 cloud data, polygonization, section curve and loft surface, fit and horizontal plane (Surfacer 10.0. Imageware, U.S.A.)을 기초로 하여 구개의 폭, 길이, 높이 및 치열궁의 형태 등을 계측하였다. 통계학적 분석을 위해 t-tests가 사용되었다. 이에 다음과 같은 결론을 얻었다. 1. 구개의 계측항목에서 유치열 전방부 구개높이를 제외한 나머지 항목에서 남자가 여자보다 크게 나왔으며, 유치열은 전구개폭(p<0.05)과 후구개폭(p<0.01), 영구치열은 구개폭(p<0.05)과 전구개길이(p<0.01), 중구개, 후구개길이(p<0.05)에서 남녀간에 유의한 차이가 있었다. 2. 남녀의 구개지수에서 유치열에서는 구개장고지수(p<0.05)와 구개장폭지수(p<0.01)가 남녀간에 통계학적으로 유의한 차이가 있었다. 영구치열의 구개지수에서는 남녀간에 유의한 차이가 없었다. 3. 유치열과 영구치열의 계측항목 비교에서 후방부 구개폭이 가장 많이 증가하였으며, 다음으로 후방부 구개높이, 전방부 구개폭, 전방부 구개길이 순이었다. 전방부 구개높이와 후방부 구개길이는 오히려 감소하였다. 4. 유치열과 영구치열의 구개지수 비교에서 구개장고지수와 구개장폭지수, 후구개폭고지수는 영구치열에서 증가하였고, 나머지 지수는 감소하였다.보아 Er:YAG 레이저와 Chinese ink로 photosensitization을 시행한 후의 Nd:YAG 레이저 조사는 일정시간 동안 S. mutans의 증식과 산 생성능을 억제시키므로써 치아우식증 예방효과를 얻을 수 있다고 사료되나 억제효과가 오래가지 않아 임상적으로 효과를 얻기 위해서는 자주 조사를 해주어야 한다는 문제점을 안고 있어 임상적으로 치아우식증 예방이란 단독 목적으로 사용하기에는 실용성이 크지 않다고 사료된다.전자현미경 관찰에서 초음파 진동을 가한 군에서 resin tag의 길이가 길었고, lateral branch의 수도 많이 관찰되었다.TEX>$1\rightarrow6$ 결합이 주된 결합인 수용성 글루캔이었다. 이상의 결과를 종합하면 구강에서 분리된 Streptococcus salivarius 119에 의한 Streptococcus mutans의 인공치태 형성 억제작용은 수용성 글루캔 형성에 의한 것으로 사료되었다.동을 유도할 수 있다고 사료된다. 또한 이유식을 통한 다양한 식품의 경험 및 식품 섭취방법 등을 연습하는 과정을 통해 앞으로의 식생활 및 성장 발달에 영향을 미칠 것으로 사료된다. 따라서 영유아의 성장발달에 따른 적절한 영양교육의 실시가 보다 체계적으로 활성화 되어야 하겠으며 이를 위해 실제로 도움이 될 수 있는 구체적인 교육내용, 방법 및 도구의 개발이 요구된다.어서, B군은 A군,C군,D군과 비교하여 통계학적으로 유의성 있는 차이를 보였고(p<0.05), E군은 F군,G군과 비교하여 통계학적으로 유의성 있는 차이를 보였다(p<0.05). 3. 광중합형 및 자가중합형 교정용 전색제는 법랑질탈회 예방효과가 있었다. 4. 광중합형 및 자가중합형 교정용 전색제는 법랑질탈회 진행억제효과가 있었다. 5. 광중합형 및 자가중합형 교정용 전색제 표본에
목적: 본 연구에서는 Tc-99m 표지 항 CEA 항체의 $F(ab')_2$분절을 이용하여, 직장암 환자에서 수술 전 방사면역신티그라피의 유용성을 전향적으로 평가하고자 시행하였으며, 더불어 수술 시야에서 방사선 탐식자로 종양을 검출하는 조기 방사면역지침수술을 시도하였다. 대상 및 방법: 직장암으로 처음 진단 받은 환자로 수술 예정인 성인 환자 19명을 대상으로 $^{99m}Tc$표지 항CEA항체(F023C5)의 $F(ab')_2$ 분절을 정맥 주사 후 4시간 전신 평면 영상과 18시간 복부와 골반부의 SPECT 영상을 얻어서 국소 섭취 증가 부위를 양성으로 판정하였다. 방사면역지침수술은 주사 후 $21{\sim}26$시간에 시행되었고, 감마선 탐식자를 이용하여 개복 후 각 장기와 종양, 골반 림프절 및 배후 방사능을 측정하고, 수술로 적출된 종양과 림프절군의 방사능을 다시 측정하였으며, 병리 소견과 비교하였다. 결과: 19명 모두에서 수술 전 검사에서 발견되었던 병변들이 선암으로 진단되었고, 제거된 97개의 림프절군 중에 27개에서 림프절 전이가 있었고 2례에서 간 전이가 있었다. 수술 전 방사면역신티그라피의 SPECT 영상에서는 20개의 원발 병소들 중 11례에서만 양성 소견을 보여 민감도는 55%였고, 림프절 전이나 간 전이 병소를 수술 전 발견할 수 있었던 예는 없었다. 수술 중 모든 환자에서 간, 비장, 신장, 대동맥 및 주요 혈관의 방사능이 매우 높았고, 원발 종양부위와 림프절의 방사능 측정치는 정상 대장이나 소장의 방사능과 구분되지 않았다. 그러나, 제거된 조직들을 다시 감마선 탐식자로 방사능을 측정하였을 때, 원발 종양과 배후방사능의 방사능 측정치는 평균 $3.47{\pm}2.25$로 종양에서 방사능의 집적이 증가되어 있었다. 절제 후 97개 림프절군의 방사성 측정치를 분석하면, 배후 방사능보다 1.5배 이상 높은 방사능치를 양성 기준으로 판정할 때 민감도, 특이도, 양성예측률과 음성예측률은 각각 78.6%, 73.9%, 55.0%와 89.5%였다. 결론: 이상의 결과는 Tc-99m 표지 항체는 항 CEA 항체의 $F(ab')_2$분절을 사용한다 하더라도 높은 배후 방사능으로 조기 방사면역지침수술을 하는데 부적당하였고, 방사면역신티그라피도 수술 전 병기 결정에 도움이 되지 않았다. 향후, 직장암 환자에서 Tc-99m 표지 항체를 이용하여 조기 방사면역지침수술을 시행하기 위해서는 배후 방사능을 줄이고 종양의 특이 결합을 향상시키는 방법들을 더 개발하는 것이 필요하다고 생각된다.
Prior to making choices among online products and services, consumers often search online product reviews written by other consumers. Online product reviews have great influences on consumer behavior because they are believed to be more reliable than information provided by sellers. However, ever-increasing lists of product reviews make it difficult for consumers to find the right information efficiently. A customized search mechanism is a method to provide personalized information which fits the user's requirements. This study examines effects of a customized search mechanism and perceived similarity between consumers and product reviewers on consumer behaviors. More specifically, we address the following research questions: (1) Can a customized search mechanism increase perceived similarity between product review authors and readers? (2) Are product reviews perceived as more credible when product reviews were written by the authors perceived similar to them? (3) Does credibility of product reviews have a positive impact on acceptance of product reviews? (4) Does acceptance of product reviews have an influence on purchase intention of the readers? To examine these research questions, a lab experiment with a between-subject factor (whether a customized search mechanism is provided or not) design was employed. In order to enhance mundane realism and increase generalizability of the findings, the experiment sites were built based on a real online store, cherrya.com (http://www.cherrya.com/). Sixty participants were drawn from a pool that consisted of undergraduate and graduate students in a large university. Participation was voluntary; all the participants received 5,000 won to encourage their motivation and involvement in the experiment tasks. In addition, 15 participants, who selected by a random draw, received 30,000 won to actually purchase the product that he or she decided to buy during the experiment. Of the 60 participants, 25 were male and 35 were female. In examining the homogeneity between the two groups, the results of t-tests revealed no significant difference in gender, age, academic years, online shopping experience, and Internet usage. To test our research model, we completed tests of the measurement models and the structural models using PLS Graph version 3.00. The analysis confirmed individual item reliability, internal consistency, and discriminant validity of measurements. The results show that participants feel more credible when product reviews were written by the authors perceived similar to them, credibility of product reviews have a positive impact on acceptance of product reviews, and acceptance of product reviews have an influence on purchase intention of the readers. However, a customized search mechanism did not increase perceived similarity between product review authors and readers. The results imply that there is an urgent need to develop a better customized search tool in order to increase perceived similarity between product review authors and readers.
Objectives : This study was designed to evaluate clinical prognosis factors of Bell's palsy patients. Methods : The 100 subjects were chosen from 262 patients over 20years old who was diagnosised Bell's palsy through Acupuncture & Moxibustion and ENT medical specialist after visiting the hospital within 8days of onset of peripheral facial palsy and after Oriental-Western Medicine Treatment, recovered completely or had over three months cares because of incomplete recovery Oriental-Western Medicine Treatment included Acupuncture Treatment, Herb med treatment, medicines treatment, Physical therapy and Electrodiagnostic Test was operated after 7 to 10days after outbreaks of the disease. Clinical prognosis factors were analyzed using House-Brackmann grading system(HBGS) as a measurement of the degree of Facial Palsy. Collected data were analyzed as Chi-Square test, ANOVA test, Independent-Samples t-test regression analysis using SPSS 12.0 WIN Program. Results : 1. There was a significant difference in the results of treatment according to site of palsy, degree of initial palsy, time of initial recovery and existence of recovery after 3weeks from onset as clinical prognosis factors of Bell's Palsy, However, a statistically significant difference was not shown in the results of treatment according to gender, age, existence of Post Auricular Pain, Hypertension, Diabetes and existence of relapse. 2. As a result of overall treatment, 85% of patients were recovered almost entirely and 15% were not recovered completely. 3. There was a significant difference in the onset of Post Auricular Pain and duration of Post Auricular Pain according to the degree of Post Auricular Pain. 4. There was a significant difference in the degree of initial palsy and degree of palsy after 3weeks from onset according to the existence of Post Auricular Pain. However, a statistically significant difference was not shown in the period of time until initial treatment, The time of initial recovery, (H-B), The period from onset to recovey, ENoG value. Conclusions : Based on the above results, prognosis of Bell's palsy was affected by degree of initial palsy, time of initial recovery and existence of recovery after 3weeks from onset.
RF 송수신기 설계 분야에서 활발하게 연구하고 있는 융복합 단일칩 설계 기술은 차내 무선망을 위한 차량 무선 단말기에도 적용 가능하며, 이의 실현을 통하여 좀 더 경제적이고 소형화된 차내 융복합 시스템을 구현할 수 있다. 제안된 광대역 전압제어 발진기는 차내 무선망에 사용할 수 있는 표준인 CDMA, PCS, GSM850, 끌림, WCDMA, WLAN, Bluetooth, WiBro, S-DMB, DSRC, GPS, DVB-H/DMB-T/H(L Band) 등의 주파수 대역을 만족시킬 수 있도록 제안된 frequency planning을 따른다. 또한, cross-coupled된 트랜지스터 한 쌍과 MOS varactor에 PMOS를 채택함과 동시에, capacitor array에서는 differential 스위칭을 사용함으로써 위상잡음을 개선하였다. 측정결과, $5.3{\sim}6.0\;mW$의 전력을 소모하며, 주파수 대역은 $4.05{\sim}5.62\;GHz$ (33%의 tuning range)이고 위상잡음은 1 MHz의 offset 주파수에서 -117.16 dBc/Hz이며 이때 figure of merit (FOM)은 $180.5{\sim}180.8$이다.
This study is for the purpose of understanding User Satisfaction of Accounting Information System more closely by means of perceiving relations between Internal Controls and Quality. That is, this study is to assess Internal Controls and Quality and to connect those with User Satisfaction. This thesis is for the substantial study on whether Information Quality, System Quality, and Service Quality influenced by Internal Controls of Accounting Information System have an effect on User Satisfaction, when Internal Controls of Accounting Information System is good, The following hypothesis was made to achieve this purpose. First, Internal Controls will have an positive influence on Quality. Second, Qualify will positively affect User Satisfaction. Third, Internal Controls will positively Influence User Satisfaction. Fourth, Internal Controls will have a positive effect on User Satisfaction through Quality For the survey sample, this study gathered data on someone engaged in companies or organizations which have computer offices, and groups were differentiated between general staff and someone in charge of the computer office, and each group had different questions. In general, 622 of questions were distributed and 200 of the final valid samples were used for the substantial analysis. As the result of the study, the relations between Internal Controls and Quality are statistically significant. The relations between Quality and User Satisfaction ire also statistically significant. But the relations between Internal Controls and User Satisfaction are not statistically significant. Path Analysis was implemented to analyze the hypothesis on whether Internal Controls have an influence on User Satisfaction through Quality. When the result of analysis with Lisrel 8.5 was examined, index numbers(GFI, AGFI, RMR) representing the suitability of the model were enough to be taken and it is showed that there is the suitability of the model. Internal Controls of Accounting Information System can't have an influence on User Satisfaction with Quality. As the above hypothesis was rejected, Through Path Analysis, this study examined the influence which relations between Internal Controls and Quality, factors of User Satisfaction, have on User Satisfaction, and is very meaningful in terms of the first trial. And on the point of time when there are little studies on the effect analyses between Internal Controls and Quality, this study would be the promoter for the future. The limitation on this study is to analyze only mutual effects between factors by choosing Internal Controls, Quality, and User Satisfaction as survey variables. The study which measure items with precision which are related to each variable and understand measurement factors clearly should be implemented.
Objectives : The aim of the present study is to examine the effect and mechanism of Erycibae Caulis and Corydalis Tuber Pharmacopuncture (ECP) on a mouse model with collagen induced rheumatoid arthritis (CIA). Methods : We evaluated the Aspartate aminotransferase (AST), Alanine aminotransferase (ALT), Creatinine, and the Blood urea nitrogen (BUN) of serum to examine the safety of this study. In vivo, we compared the results of the non-treated group, the normal saline pharmacopuncture treated control group, the indomethacin treated group and the ECP group. We evaluated rheumatoid arthritis manifestation and the Rheumatoid Arthritis Index (AI). Also, immune cells in blood affected by ECP were evaluated by calculating the level of white blood cells (WBC), neutrophil, lympocytes and monocytes. Next, the level of Immunoglobulin M (IgM), Immunoglobulin G (IgG), Interleukin (IL)-$1{\beta}$, IL-6, IL-17, Tumor Necrosis Factor (TNF)-${\alpha}$ and Granulocyte-macrophage Stimulating Factor (GM-CSF)in serum were measured. We examined the imaging of cartilage degeneration using micro CT-arthrography of the hind paw. Additionally, we examined the effects of reducing bone volume (BV) ratio and bone surface/bone volume (BS/BV) ratio with 3D Micro-CT. Finally, we did a histopathologic examination analysis. Results : The absence of liver and kidney toxicity was evident. In vivo, edema of the joints of the ECP group decreased greatly in macroscopic observation. AI measurement of the ECP group also decreased significantly compared to the control group. The level of WBC, neutrophil, lympocytes, and monocytes in the blood decreased but there was no statistical significance of this data. IgM of the ECP group decreased significantly compared to the control group. IL-$1{\beta}$, IL-6, TNF-${\alpha}$, and GM-CSF production of the ECP group decreased significantly compared to the control group. As a result of examining joint condition with 3D micro CT, deformation and destruction of the joint was shown to have decreased. Bone density of ECP group increased at a statistically significant level compared to the control group. Degree of joint inflammation of ECP group decreased significantly compared to the control group. After H&E and M-T staining, infiltration of immune cells, subsidence of the cartilage, damage to the synovial cells and joint erosion decreased. Conclusion : This study showed that ECP hindered the process of rheumatoid arthritis and protected joints and cartilage.
Statement of problem. There have been many studies about marginal discrepancy of single restorations made by various systems and materials. But most of statistical inferences are not definite because of sample size, measurement number, measuring , instruments, etc. And there have been few studies about the marginal fit of Computer-aided Cercon crowns. Purpose. The purpose of this study was to compare the marginal fit of the anterior single restorations made using computer-aided milled Cercon crowns with metal-ceramic restorations and to obtain more accurate information by using a large enough sample size and by making sufficient measurements per specimen. Material and methods. The in vitro marginal discrepancies of computer-aided milled Cercon crowns and control groups (metal ceramic crowns) were evaluated and compared. The crowns were made from one extracted maxillary central incisor prepared by milling machine. 30 crowns per each system were fabricated. Measurements of a crown were recorded at 50 points that were randomly selected for marginal gap evaluation. Parametric statistical analysis was performed for the results. Results. The means and standard deviations of the marginal fit were 85$\pm$22$\mu$m for the control group and 91$\pm$15$\mu$m for the Cercon crowns. The t-test of the marginal discrepancies between Cercon crowns and metal-ceramic crowns were performed. Significant differences were not found between groups (P=0.230>.05). Based on the criterion of 120$\mu$m as the limit of clinical acceptability, the mean marginal fits of Cercon crowns and metal-ceramic crowns were acceptable. Conclusion. Within the limitations of this in vitro study, the following conclusions were drawn: 1. Mean gap dimensions and standard deviations at the marginal opening for maxillary incisal crowns were 85$\pm$22$\mu$m for the control (metal-ceramic crowns), 91$\pm$15$\mu$m for Cercon crowns. 2. The Cercon crowns showed slightly larger marginal gap discrepancy than the control but marginal gap between Computer-aided milled Cercon crowns and metal ceramic crowns did not showed significant difference (P>.05). 3. The Cercon crowns and metal ceramic crowns showed clinically acceptable marginal discrepancy.
Statement of problem: Damping of the peak force transmitted to implants has been reported by in vitro studies using impact forces on resin-veneered superstructures. Theoretical assumptions suggest that use of acrylic resin for the occlusal surfaces of a prosthesis would protect the connection between implant and bone. Therefore, the relationship between prosthesis materials and the force transmitted through the implant system also needs to be investigated under conditions that resemble the intraoral mechanical environment. Purpose: The purpose of this study was to analyze the fracture strength and modes of temporary prosthesis when a flange or occlusally extended structure were connected on the top of the abutment. Material and method: Modified abutments of winged and bulk design were made by casting the desired wax pattern which is made on the UCLA type plastic cylinder. Temporary crowns were made using templates on the modified abutments, and its fracture toughness and strain were compared to the traditional temporary prosthesis. To evaluate the effect of aging, 5.000 times of thermocycling were performed, and their result was compared to the 24hours specimen result. Results: The following conclusions were drawn from this study: 1. In the fracture toughness test, temporary crown's fracture line located next to the screw hole while modified designs with metal support showed fracture line on the metal and its propagation along the metal-resin interface. 2. Wing and bulk structure didn't show significant difference in the fracture toughness (p>0.05), but wing structure showed stress concentration on the screw hole area compared to bulk structure which showed even stress distribution. 3. In the fracture toughness test after thermocycling, wing and bulk structure showed increased or similar results in metal supported area while off-metal area and temporary crown showed decreased results. 4. In the strain measurement after thermocycling, its value increased in the temporary and bulk structure. However, wing structure showed decreased value in the loading point while increased value in the screw hole area. Conclusion: Wing type design showed compatible result to the bulk type that its application with composite resin prosthesis to the implant dentistry is considered promising.
The Objective of this study was to design the model which predict the future cash flow of hospitals and on the basis of designed model to support sound hospital management by the prediction of future cash flow. The five cash flow measurement variables discussed in financial accrual part were used as variables and these variables were defined as NI, NIDPR, CFO, CFAI, CC. To measure the cash flow B/S related variables, P/L related variables and financial ratio related variables were utilized in this study. To measure cash flow models were designed and to estimate the prediction ability of five cash flow models, the martingale model and the market model were utilized. To estimate relative prediction outcome of cash flow prediction model and simple market model, MAE and MER were used to compare and analyze relative prediction ability of the cash flow model and the market model and to prove superiority of the model of the cash flow prediction model, 32 Regional Public Hospital's cross-section data and 4 year time series data were combined and pooled cross-sectional time series regression model was used for GLS-analysis. To analyze this data, Firstly, each cash flow prediction model, martingale model and market model were made and MAE and MER were estimated. Secondly difference-test was conducted to find the difference between MAE and MER of cash flow prediction model. Thirdly after ranking by size the prediction of cash flow model, martingale model and market model, Friedman-test was evaluated to find prediction ability. The results of this study were as follows: when t-test was conducted to find prediction ability among each model, the error of prediction of cash flow model was smaller than that of martingale and market model, and the difference of prediction error cash flow was significant, so cash flow model was analyzed as excellent compare with other models. This research results can be considered conductive in that present the suitable prediction model of future cash flow to the hospital. This research can provide valuable information in policy-making of hospital's policy decision. This research provide effects as follows; (1) the research is useful to estimate the benefit of hospital, solvency and capital supply ability for substitution of fixed equipment. (2) the research is useful to estimate hospital's liqudity, solvency and financial ability. (3) the research is useful to estimate evaluation ability in hospital management. Furthermore, the research should be continued by sampling all hospitals and constructed advanced cash flow model in dimension, established type and continued by studying unified model which is related each cash flow model.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.