• Journal of Korean Society on Water Environment
• /
• v.18 no.2
• /
• pp.123-130
• /
• 2002

Bench scale experiments were carried out with two biological nutrient removal(BNR) units, A/O and $A^2O$ processes, to investigate the behavior of phosphorus in the system and to compare the characteristics of phosphorus removal in two BNR processes. To achieve this goal, COD/T-P and COD/TKN ratios of the influent was varied in the range of 23~64 and 5~24, respectively. In A/O process, influent COD/T-P ratio should be kept higher than 44mg/L to meet the final effluent T-P concentration lower than 1mg/L and in $A^2/O$ process, influent COD/T-P and COD/TKN ratios higher than 56 and 10, respectively, were required for good phosphorus release and uptake with no influence of nitrate nitrogen in return sludge. At this conditions, the rate of phosphorus release in the anaerobic basin should be kept higher than 0.1 kg S-P/kg MLVSS d In A/O process, the phosphorus content of anaerobic and aerobic sludges was increased as SRT of total system was becoming longer resulting in decreasing the difference of phosphorus content between two sludges while phosphorus release in anaerobic basin and phosphorus uptake in aerobic basin was not incident. In $A^2/O$ process, the phosphorus content of anaerobic and aerobic sludges were not increased with higher SRT of total system due to the relatively high nitrate concentration in return sludge. However, the difference of phosphorus content between anaerobic and aerobic sludges was incident when phosphorus release and uptake was observed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.294-296
• /
• 1999

Solid solution ceramics having various ratios between xPb( $Y_{1}$2/T $a_{1}$2/) $O_3$ and Pb(Z $r_{0.52}$ $Ti_{0.48}$) $O_3$were synthesized by a conventional solid state reaction for well sintered specimens, dielectric and piezoelectric prperties were studied as a function of composition. The dielectric constant of PYT-PZT ceramics of 4 mol% PYT was 1,424 at room temperature. The maximum value of electromechanical couping facotr $k_{p}$ of 51% $k_{t}$ of 30% were obtained at the composition of 4 mol% PYT, howerver mechanical quality factor( $Q_{m}$) had a minimum value of 69 at 4 mol% PYT. Also the maximum value of piezoelectric constant of $D_{33}$(310[pC/N]) and $d_{31}$(-131[pC/N]) were obtained at the composition of 4 mol% PYT content.ntent.t.t.t.

• Journal of the Korean Society for information Management
• /
• v.6 no.1
• /
• pp.15-36
• /
• 1989

The r a p i d i n c r e a s e o f microcomputer technology has r e s u l t e d i n t h e broad a p p l i c a t i o n t o various f i e l d s . The purpose of t h l s paper 1s to design a computerized r e t r i e v a l system f o r nuclear information m a t e r i a l s using a microcomputer.

• Bulletin of the Korean Mathematical Society
• /
• v.56 no.5
• /
• pp.1117-1127
• /
• 2019

Let ${\mathcal{L}}_2=(-{\Delta})^2+V^2$ be the $Schr{\ddot{o}}dinger$ type operator, where nonnegative potential V belongs to the reverse $H{\ddot{o}}lder$ class $RH_s$, s > n/2. In this paper, we consider the operator $T_{{\alpha},{\beta}}=V^{2{\alpha}}{\mathcal{L}}^{-{\beta}}_2$ and its conjugate $T^*_{{\alpha},{\beta}}$, where $0<{\alpha}{\leq}{\beta}{\leq}1$. We establish the $(L^p,\;L^q)$-boundedness of operator $T_{{\alpha},{\beta}}$ and $T^*_{{\alpha},{\beta}}$, respectively, we also show that $T_{{\alpha},{\beta}}$ is bounded from Hardy type space $H^1_{L_2}({\mathbb{R}}^n)$ into $L^{p_2}({\mathbb{R}}^n)$ and $T^*_{{\alpha},{\beta}}$ is bounded from $L^{p_1}({\mathbb{R}}^n)$ into BMO type space $BMO_{{\mathcal{L}}1}({\mathbb{R}}^n)$, where $p_1={\frac{n}{4({\beta}-{\alpha})}}$, $p_2={\frac{n}{n-4({\beta}-{\alpha})}}$.

• Korean Journal of Materials Research
• /
• v.2 no.5
• /
• pp.353-359
• /
• 1992

Thermal oxidation and plasma enhanced chemical vapor deposition of tantalum oxide thin films on p-type (100) Si substrates were studied to examine the dielectric nature of T$a_2O_5$ as a Al/T$a_2O_5$/p-Si capacitor. Microstructure and dielectric properties of the capacitors were investigated by XRD, AES, high frequency C-V analyzer, I-V meter and TEM. XRD analysis showed that the structure of T$a_2O_5$ films were amorphous, but the films were crystallized to hexagonal $\delta$-T$a_2O_5$ by 65$0^{\circ}C$ thermal oxidation treatment. It was found that the stoichiometry of the films was more or less close to 2 : 5. Leakage current density and relative dielectric constant of thermal oxidation T$a_2O_5$ film at 60$0^{\circ}C$ was 5.0${ imes}10^{-6}$/A/c$m^2 and 31.5, respectively. In the case of PECVD T$a_2O_5$film deposited at 0.47W/c$m^2 they were 2.5${ imes}10^{-5}$/A/$ extrm{cm}^2$ and 24.0, respectively. The morphology of the films and interfaces were investigated by TEM.

• Journal of Animal Science and Technology
• /
• v.46 no.4
• /
• pp.613-624
• /
• 2004

This study was aimed at investigating the effect of fat supplementation with divalent ions such as MgO and $CaCl_2$ on 1) in vitro ruminal fermentation characteristics and insoluble fatty acid formation, and on 2) animal performance in finishing Hanwoo bulls. In in vitro trial, five different types of diets based on supplementation sources of fat and divalent ions, i.e. T=basal diet+4% tallow, T-Ca=T+0.5% $CaCl_2$, T-Mg=TA+0.5% MgO, T-MgCa = T +0.5% $CaCl_2$+0.5% MgO, T-caS =4% Ca salt tallow, were tested. Higher pH values were observed at 6 hr incubation(P<0.01) while higher amount of VFA were produced in diets 4 and 5 at 12 hr incubation(P<0.05). Nutrients(DM, OM, Crude protein and NDF) degradation tended to increase in divalent ions or Ca-salts treated tallow treatments compared with tallow treatment after 12 h. The amount of insoluble fatty acid increased by adding MgO or $CaCl_2$ to tallow or Ca soap tallow during incubation(P<0.05). In in vivo trial, thirty finishing Hanwoo(average BW 460kg) were divided into three groups based on fat sources and divalent ions, i.e. Control(EE 2.40), T-MgCa = control + tallow + $CaCl_2$ + MgO, T-CaS = control + Ca soap tallow (EE 5.30%). After feeding each diet for 80 days, average daily weight gain showed 0.89, 1.02, 1.17kg in diets 1, 2 and 3, respectively. The highest feed efficiency was observed(0.12) in diet 2 group, followed by diet 3 (0.10) and 1 groups(0.08; P < 0.05). In conclusion, the present results could be sununarized that the performance of Hanwoo bulls was improved by tallow with divalent ions without any negative effect on rumen fermentation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.291-294
• /
• 2000

The crystallization behavior and dc Conductivities of CuO-P$_2$O$_{5}$ -Nb$_2$O$_{5}$ -V$_2$O$_{5}$ glasses prepared by quenching on the copper plate were investigated. The conductivities of the glasses were range from 10$^{-5}$ s.$cm^{-1}$ / at room temperature, but the conductivities of the glass-ceramics were 10$^{-3}$ s.$cm^{-1}$ / increased by 10$^2$order. The crystalline product in the glass-ceramics was CuV$_2$O$_{6}$ . The linear relationship between in($\sigma$T) and T$^{-1}$ suggested that the electrical conduction in the present glass-ceramics would be due to a small polaron hopping mechanism.

• Journal of Environmental Impact Assessment
• /
• v.28 no.6
• /
• pp.549-555
• /
• 2019

The purpose of this study is to ensure optimal operating conditions for improving the removal efficiency of phosphorus (P) and nitrogen (N) that are the causative agents of eutrophication by utilizing functional media. The main ingredients of the functional media used in this study are Si, Al, and Fe, SiO₂, KAlSiO₃O₈, Al₂O₂·2SiO₂O, H₃Al₂Si₂O₉, Fe₃O₄O), and berylite. To identify the maximum efficiency of the filtration process, the processing efficiency experiment was carried out according to flow method, velocity, and thickness of residual media. The flow method carried out two experiments, 50 m/day, 100 m/day, 150 m/day, 200 m/day, 250 m/day, and 20 cm, 40 cm, 50 cm, 60 cm, 80 cm of lead depth. Experiments have shown that SS, T-N, and T-P all showed higher elimination efficiency of the upflow current conditions than the downflow current conditions, and that the processing efficiency of the linearity is the highest at SS 50 m/day, T-N 150 m/day and T-P 100 m/day. In addition, the analysis of the removal efficiency according to the residual thickness showed that SS, T-N, and T-P all showed the highest efficiency at 60 cm. In addition, the analysis of the removal efficiency according to the residual thickness showed that SS, T-N, and T-P all showed the highest efficiency at 60 cm. It is considered desirable to set the top-down flow conditions and residual thickness of 60 cm and adjust the velocity of the line according to the target media for removal.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.1
• /
• pp.1-12
• /
• 2001

Tidal computations of $M_2,\;S_2,\; K_1$ and $O_1$ constituents in the northeast Asian sea are presented by blending the Topex/Poseidon (T/P) altimeter data into a hydrodynamic model with $5'{\times}5'$ resolution. A series of sensitivity experiments on a weighting factor, which is the control parameter in the blending method, are carried out using $M_2$ constituent. The weighting factor is set to be in inverse proportion to the square root of water depth to reduce noises which could occur in data-assimilative model by blending T/P data. Model results obtained by blending the T/P-derived $M_2,\;S_2,\; K_1$ and $O_1$ constituents simultaneously are compared with all T/P-track tidal data; Average values of amplitude and phase errors are close to zero. Standard deviations of amplitude and phase errors are approximately 2 cm and less than 10 degrees respectively. The data-assimilative model results show a quite good agreement with T/P-derived tidal data, particularly in shallow water region (h<250m). In deep water regions, T/P-derived tidal data show unreasonable spatial variations in amplitude and phase. The data-assimilative model results differ from T/P-derived data, but are improved to show reasonable spatial variations in amplitude and phase. In addition, the T/P-blended model results are in good agreement with coastal tide gauge data which are not blended into the model.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.666-669
• /
• 2002

In this Research, we would like to perform optimal design by using theoretical equation and experimental equation for development of transmission and P.T.O on work vehicle with multi-function that is suited fruit cultures in my country. For the purpose of reducing development period about product and minimizing risk about design error, detail design and interference check are accomplished by FEM analysis and CAD software.