• IEMEK Journal of Embedded Systems and Applications
• /
• v.18 no.4
• /
• pp.151-157
• /
• 2023

RPL (IPv6 Routing Protocol for Low-power Lossy Network) is a standardized routing protocol for LLNs (Low power and Lossy Networks) by the IETF (Internet Engineering Task Force). RPL creates routes and builds a DODAG (Destination Oriented Directed Acyclic Graph) through OF (Objective Function) defining routing metrics and optimization objectives. RPL supports a leaf mode which does not allow any child nodes. In this paper, we propose INFRA-RPL which provides a dynamic leaf mode functionality to a leaf node with the mobility. The proposed protocol is implemented in the open-source IoT operating system, Contiki-NG and Cooja simulator, and its performance is evaluated. The evaluation results show that INFRA-RPL outperforms the existing protocols in the terms of PDR, latency, and control message overhead.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.59-61
• /
• 2022

항로표지 시스템은 적은 양의 데이터를 간헐적으로 전송하고 넓은 지역에서 통신이 가능해야 하기 때문에 NB-IoT 시스템은 매우 적합한 기술이다. 본 연구에서는 LTE 시스템과 공존하는 inband-mode NB-IoT 시스템에서 상항링크 간섭을 분석하였다.

• Steel and Composite Structures
• /
• v.45 no.4
• /
• pp.605-619
• /
• 2022

The tensile behavior of the Thread-fixed One-side Bolt (TOB) at high temperatures was studied using the Finite Element Modeling (FEM) to explore the structural responses that could not be measured in tests. The accuracy of the FEM was verified using the test results from the failure mode, load-displacement curve as well as yielding load. Three typical failure modes of TOB connected T-stubs were observed, which were the Flange Yielding (FY), the Bolt Failure (BF) and the Coupling Failure mode (CF). The influence of the flange thickness tb and the temperature θ on the tensile behavior of the T-stub were discussed. The initial stiffness and the yielding load decreased with the increase of the temperature. The T-stubs almost lost their resistance when the temperature exceeded 700℃. The failure modes of T-stubs were mainly decided by the flange thickness, which relates to the anchorage of the hole threads and the bending resistance of flange. The failure mode could also be changed by the high temperature. Design equations in EN 1993-1-8 were modified and verified by the FEM results. The results showed that these equations could predict the failure mode and the yielding load at different temperatures with satisfactory accuracy.

• The Korean Nurse
• /
• v.33 no.3
• /
• pp.79-91
• /
• 1994

The purpose of this study was to identify the meaningful nursing diagnosis in maternity unit and to suggest formally the basal data to the nursing service with scientific approach. The subject for this paper were 64 patients who admitted to Chung Ang University Hospital, Located in Seoul, from Mar. 10, to July 21, 1993. The results were as follows: 1. The number of nursing diagnosis from 64 patients were 892 and average number of nursing diagnosis per patient was 13.9. 2. Applying the division of nursing diagnosis to Roy's Adaptation Model, determined nursing diagnosis from the 64 patients were 621 (69.6%) in physiological adaptation mode and (Comfort, altered r/t), (Injury, potential for r/t), (Infection, potential for r/t), (Bowel elimination, altered patterns r/t), (Breathing pattern, ineffective r/t), (Nutrition, altered r/t less than body requirement) in order, and 139 (15.6%) in role function mode, (Self care deficit r/t), (Knowledge deficit r/t), (Mobility, impaired physical r/t) in order, 122 (13.7%) in interdependence adaptation mode, (Anxiety r/t), (Family Process, altered r/t) in order, 10(1.1%) in self concept adaptation mode, (Powerlessness r/t), (Grieving, dysfunctional r/t) in order. 3. Nursing diagnosis in maternity unit by the medical diagnosis, the average hospital dates were 3.8 days in normal delivery and majority of used nursing diagnosis, (Comfort, altered r/t) 64.6%, (Self care deficit r/t) 13.6% in order, and the average hospital dates were 9.6 days in cesarean section delivery and majority of used nursing diagnosis, (Comfort, altered r/t) 51.6%, (Self care deficit r/t) 15.2%, (Infection, potential for r/t) 9.9%, (Injury, potential "for r/t) 8.1%, (Anxiety r/t) 5.0%, (Mobility, impaired physical r/t) 3.3% in order, and the average hospital dates were 15.8days in preterm labor and majority of used nursing diagnosis, (Comfort, altered r/ t), (Anxiety r/t), (Injury, potential for r/t) in order, and the average short-term hospital dates were 2.5days, long-term hospital dates were 11.5days in gynecologic diseases and majority of used nursing diagnosis, (Comfort, altered r/t). (Self care deficit r/t), (Injury, potential for r/t), (Infection, potential for r/t) in order.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.1
• /
• pp.112-117
• /
• 2004

This paper suggests the design and analysis of the fuzzy sliding mode control for a nonlinear system using Takagi-Sugeno(T-S) fuzzy model. In this control scheme, identifying procedure that the input gain matrices in a T-S fuzzy model are manipulated into the same one is needed. The input disturbances generated in the identifying procedure are resolved by incorporating the disturbance treatment method of the conventional sliding mode control. The proposed control strategy can also treat the input disturbances that can not be linearized in the linearization procedure of T-S fuzzy modeling. Design example for the nonlinear system, an inverted pendulum on a cart, demonstrates the utility and validity of the proposed control scheme.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.4
• /
• pp.1263-1274
• /
• 1996

In this paper, as elastic-plastic fracture toughness test under mixed mode loading was proposed using a single edge-cracked specimen subjected to bending moment(M), shearing force(F), and twisting moment(T). The J-integral of a crack in the specimen is expressed in the form J=$J_I$+ $J_II$$J_III$, where $J_I$, $J_II$ and $J_III$ are the components of mode I, mode II and mode III deformation, respectively. $J_I$, $J_II$ and $J_III$ can be estimated from M-$\theta$ ($\theta$;crack opening angle), F-U(U; crack shear displacement) and T-$\alpha$ ($\alpha$;crack twisting angle). In order to obtain the the M<-TEX>$\theta$, F-U and T-$\alpha$ diagram inreal time, a new deformaiton gage for mixed mode loading was proposed using the optical position sensing device(PSD). The elastic-plastic fracture toughness test was carried out with an aluminum alloy. The loading apparatus was designed and manufactured for this experiment. For the loading condition of the crack initatio in the mixed mode, the MMT -3(mode I+ mode II+ mode III) has the lowest values out of the all specimens. This implies that MMT-3 is possible of the crackinitation at lower load, if the specimen acts on together with the torque under the same loading condition. An elastic-plastic fracture toughness test using the PSD brings a successful experimentation in measuring the crack deformation(mode I+ mode II+ mode III).

• Journal of the military operations research society of Korea
• /
• v.10 no.2
• /
• pp.61-73
• /
• 1984

A block replacement policy using items with different reliability is discussed. We divide system unit failure modes into two modes and use less reliable unit when operating unit fails near the planned preventive replacement time. In this policy, item A has two failure modes. Mode-1 failure is removed by minimal repair, mode-2 failure by replacement. If mode-2 failure of item A happens in (0, $T-{\delta}$), failure item A is replaced by new item A. If mode-2 failure of item A happens in ($T-{\delta}$, T), failure item A is replaced by new item B. Item B should be cheaper and less durable than item A. Under this policy, we determine the preventive replacement interval $T^{*}$ and the interval ${\delta}^{*}$ of item B replacement which minimize the cost rate per unit time.

• ETRI Journal
• /
• v.6 no.3
• /
• pp.17-20
• /
• 1984

A block replacement policy using items with different reliability is discussed. We devide system unit failure modes into two modes and use less reliable unit when operating unit fails near the planned preventive replacement time. In this policy, item A has two failure modes. Mode-1 failure is removed by minimal repair, mode-2 failure by replacement. If mode-2 failure of item A happens in (0,T- $\delta$). failure item A is replaced by new item A. If mode-2 failure of item A happens in(T-$\delta$,T), failure item A is replaced by new item B. Item B should be cheaper and less durable than item A. Under this policy, we determine the preventive replacement interval T and the interval $\delta$ of item B replacement which minimize the cost rate per unit time.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.3
• /
• pp.90-94
• /
• 2018

In this paper, we applied a three-level T-type inverter with the one more voltage level than two-level inverter. However, the three-level T-type inverter has a systematic problem with voltage unbalances. So neutral point control is essential. Therefore, the voltage unbalance problem of the three - phase inverter was confirmed to be controlled within 5V using the neutral point control algorithm in charge and discharge mode. In addition, total harmonic distortion was reduced in three phases (u phase, v phase, w phase) when neutral point control was performed in charging mode and also in three phases (u phase, v phase, w phase) in discharge mode. In this paper suggests a neutral point control algorithm to solve the voltage unbalance of a three-level T-type inverter, and shows the improvement of the performance of the proposed algorithm through experiment.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.142-144
• /
• 2006

In this paper, the Ternary adder and multiplier are implemented by current-mode CMOS. First, we implement the ternary T-gate using current-mode CMOS which have an effective availability of integrated circuit design. Second, we implement the circuits to be realized 2-variable ternary addition table and multiplication table over finite fields GF(3) with the ternary T-gates. Finally, these operation circuits are simulated by Spice under $1.5{\mu}m$ CMOS standard technology, $1.5{\mu}m$ unit current, and 3.3V VDD voltage. The simulation results have shown the satisfying current characteristics. The ternary adder and multiplier implemented by current-mode CMOS are simple and regular for wire routing and possess the property of modularity with cell array.