• Steel and Composite Structures
• /
• v.37 no.2
• /
• pp.211-227
• /
• 2020

To explore the feasibility of eliminating the longitudinal rebars and stirrups by using ultra-high-performance fiber reinforcement concrete (UHPFRC) in concrete encased steel composite stub column, compressive behavior of UHPFRC encased steel stub column has been experimentally investigated. Effect of concrete types (normal strength concrete, high strength concrete and UHPFRC), fiber fractions, and transverse reinforcement ratio on failure mode, ductility behavior and axial compressive resistance of composite columns have been quantified through axial compression tests. The experimental results show that concrete encased composite columns with NSC and HSC exhibit concrete crushing and spalling failure, respectively, while composite columns using UHPFRC exhibit concrete spitting and no concrete spalling is observed after failure. The incorporation of steel fiber as micro reinforcement significantly improves the concrete toughness, restrains the crack propagation and thus avoids the concrete spalling. No evidence of local buckling of rebars or yielding of stirrups has been detected in composite columns using UHPFRC. Steel fibers improve the bond strength between the concrete and, rebars and core shaped steel which contribute to the improvement of confining pressure on concrete. Three prediction models in Eurocode 4, AISC 360 and JGJ 138 and a proposed toughness index (T.I.) are employed to evaluate the compressive resistance and post peak ductility of the composite columns. It is found that all these three models predict close the compressive resistance of UHPFRC encased composite columns with/without the transverse reinforcement. UHPFRC encased composite columns can achieve a comparable level of ductility with the reinforced concrete (RC) columns using normal strength concrete. In terms of compressive resistance behavior, the feasibility of UHPFRC encased steel composite stub columns with lesser longitudinal reinforcement and stirrups has been verified in this study.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.140-148
• /
• 1992

The free vibration problem of symmetrically laminated composite rectangular plates is formulated based on anisotropic thick plate theory including the effects of shear deformation and rotary inertia. Considering the difficulty of obtaining closed-form solutions, Rayleigh-Ritz analysis using polynomials having the property of Timoshenko beam functions as trial functions is adopted. The boundary conditions elastically restrained against rotation are accomodated as well as classical boundary conditions. From the results of numerical studies, the validity of the present method is verified. And it is also found that the adoption of thick plate theory for the vibration analysis of laminated composite plates is essential because of the relatively large shear deformation effect, and that the convergence of the Rayleigh quotient to the stationary value is less rapid in anisotropic composite plates than that in the orthotropic ones due to more complicated mode shapes of the former.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.5
• /
• pp.60-71
• /
• 2007

The startup characteristic of liquid propellant rocket engine should be focused on the stable ignition of combustion chamber and gas generator. Also, to lessen the propellants consumption during this period which doesn't contribute to the flight thrust, the engine has to be transferred to the nominal mode quickly. Because of the risk of test, it is impossible to develop all the startup cyclogram or the specifications of engine by test, so the precedent numerical approach is quite necessary. In this study we developed a mathematical model for the startup phenomena in a liquid rocket engine driven by gas generator-turbopump system based on the commercial 1-D flow system analysis program, Flowmaster. Using this program we proposed a methodology to obtain the specifications of turbine starter and the opening time of shutoff valves for the stable startup of the engine. To verify this methodology we qualitatively compared the analysis results to the typical startup curve of the published engine, then found it is quite well matched.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.5
• /
• pp.39-48
• /
• 2000

We newly proposed a polymer based vertical asymmetric optical coupler, which was characterized by simple fabricating procedure and short coupling length. And we fabricated a thermo-optic modulator using the polymeric optical coupler. We optimized the proposed device by coupling characteristic analysis. In a TE polarized 1.33${\mu}{\textrm}{m}$ wavelength, we obtained very short coupling length(L=277.6${\mu}{\textrm}{m}$) with 0.4${\mu}{\textrm}{m}$ thickness of middle layer, high coupling efficiency(94%), and asymmetric vertical waveguides with n$_{u}$ = 1.522, n$_{l}$ = 1.51. We implemented vortical asymmetric thermo-optic modulator with lower inverted rib waveguide and upper slab waveguide. In the 600Hz bandwidth and 4.5㎽ input power, the extinction ratio of the mode was 17㏈ with an insertion loss of 4.5㏈.

• Journal of The Korean Association For Science Education
• /
• v.16 no.4
• /
• pp.429-440
• /
• 1996

This study examined the effects of the ARCS model for science education and found a way of improving ARCS while finding any weaknesses. More specific research questions were as follows: 1) Does the ARCS model enhance the learners' achivement in highschool Earth Science significantly?; 2) Does the ARCS model enhance the learners' motivation in highschool Earth Science significantly?; 3) What are the weaknesses of the prescriptions of the ARCS model for designing a lesson, if any?; 4) How can the weaknesses of the prescriptions of the ARCS modeI be overcome? In order to fulfill the purpose of this study, the two major research methodologies were implemented: pretest-posttest control group design and formarive research. This study was conducted in two distinct phases: 1) designing a set of instructions for 4 weeks with the principles of the ARCS model (to find the weaknesses of the ARCS model) and 2) teaching the instructions and checking the effectiveness of the ARCS model by pretest and posttest with control and experimental groups(to find weaknesses of the underlying theory of the ARCS). After the experiment, each group took an achievement test and an attitude test on the given instruction and gathered data were analyzed with t-tests. Also, from each four classes 7$\sim$8 students were randomly sampled and individually interviewed about the instructional effectiveness and their preference on the instructions. The results of this study are summarized as follows: Significant differences between the control group and experimental group are seen in three components; Attention, relevance, and satisfaction. No significant differences are seen in the attitude of confidence. The weakness of the prescriptions of the ARCS model, are insufficient of strategy for 'confidence'. For overcoming the weaknesses of the prescriptions of the ARCS model, developmental type research is needed.

• Journal of Microbiology
• /
• v.40 no.2
• /
• pp.119-124
• /
• 2002

Experiments for the characterization of inactivation were performed in a series of batch processes with the total coliform used as a general indicator organism based on the chlorine residuals as a disinfectant. The water samples were taken from the outlet of a settling basin in a conventional surface water treat- ment system that is provided with the raw water drawn from the mid-stream of the Han River, The inactivation of total coliform was experimentally analysed for the dose of disinfectants contact time, filtration and mixing intensity. The curves obtained from a series of batch processes were shaped with a general tailing-off and biphasic mode of inactivation, i.e. a sharp loss of bacterial viability within 15 min followed by an extended phase. In order to observe the effect of carry-over suspended solids on chlorine consumption and disinfection efficiency, the water samples were filtered, prior to inoculation with coliforms, with membranes of both 2.5$\mu$m and 11.0 $\mu$m pore size, and with a sand tilter of 1.0 mm in effective size and of 1.4 in uniformity coefficient. As far as the disinfection efficiency is concerned, there were no significant differences. The parameters estimated by the models of Chick-Wat-son, Hom and Selleck from our experimental data obtained within 120 min are: log(N/N$\_$0/)=-0.16CT with n=1, leg(N/N$\_$0/)=-0.71C$\^$0.87/ with n 1 for the Chick-Watson model, log (N/N$\_$0/)=-1.87C$\^$0.47/ T$\^$0.36/ for the Hom model, log (MHo)=-2.13log (1+CT/0.11) for the Selleck model. It is notable that among the models reviewed with regard to the experimental data obtained, the Selleck model appeared to most closely resemble the total coliform survival curve.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12C
• /
• pp.1669-1676
• /
• 2004

In H.264, 7 modes {16${\times}$16, 16${\times}$8, 8${\times}$16, 8${\times}$8, 8${\times}$4, 4${\times}$8, 4${\times}$4) are used to enhance the coding efficiency. The motion vector estimation with 7 modes may require huge computing time. In this paper, to speed up the motion vector estimation procedure while the high image quality remains, we propose a motion vector refinement scheme using the temporary motion vector generated with little computation. The proposed estimation process consists of three phases: Mode decision for a 16${\times}$16 macroblock, Composing a temporary motion vector, Refinement of the temporary motion vector. We demonstrate the effectiveness of the proposed method by computer simulation. In the results, the encoding time consumed by the proposed scheme has been reduced significantly while the encoded video quality remains unchanged.

• Journal of Information Management
• /
• v.24 no.2
• /
• pp.36-53
• /
• 1993

Nowadays we usually act based on information in order to act effectively, we should enlarge our access to information of course, we have several methods to choose from, but commercial databases are the most advantageous. One reason is that everyone has equal access to commercial databases. As a result, people or companies who use commercial database information skillfully have a distince advantage over those who don't commercial database services in japan have been changing rapidly since their birth more than twenty years ago. For example, the distribution mode of databases is changing : from the original batch(off line) to on-line and most recently to the coexistence of batch and on line with the advent of CD-ROM. It is important for us to keep up with the new trends in databases, and to utilize them effectively as a tool in the information age.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.8
• /
• pp.2061-2074
• /
• 1998

In pattern recognition and image analysis upplications, a graph is a useful tool for complex obect representation and recognition. However it takes much time to pair proper nodes between the prototype graph and an input data graph. Futhermore it is difficult to decide whether the two graphs in a class are the same hecause real images are degradd in general by noise and other distortions. In this paper we propose a matching algorithm using a matrix. The matrix is suiable for simple and easily understood representation and enables the ordering and matching process to be convenient due to its predefined matrix manipulation. The nodes which constitute a gaph are ordered in the matrix by their geometrical positions and this makes it possible to save much comparison time for finding proper node pairs. for the classification, we defined a distance measure thatreflects the symbo's structural aspect that is the sum of the mode distance and the relation distance; the fornet is from the parameters describing the node shapes, the latter from the relations with othes node in the matrix. We also introduced a subdivision operation to compensate node merging which is mainly due t the prepreocessing error. The proposed method is applied to the recognition of musteal symbols and the result is given. The result shows that almost all, except heavily degraded symbols are recognized, and the recognition rate is approximately 95 percent.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.12
• /
• pp.831-836
• /
• 2014

One-dimensional (1D) photonic crystals (PCs) were prepared by $TeO_x(2<x<3)/SiO_2$ with the difference refractive index, and fabricated by sputtering technique from a $TeO_2$ and $SiO_2$ target. The $TeO_x$(2$Ar:O_2=40:10$). A 10-pair $TeO_x(2<x<3)/SiO_2$ 1D PCs were fabricated with the structure parameters of filling factor=0.5185, and period=410 nm. The properties of 1D PCs with and without a defect layer were evaluated by UV-VIS-NIR. A normal mode 1D PC have a photonic band gap (PBG) in the near infrared (NIR) region from 1,203 to 1,421 nm. In the case of 1D PC containing a defect layer, a defect level appears at 1,291 nm. The measured transmittance (T) spectra are nearly corresponding to calculated results. After He-Cd laser exposure, the defect level is shifted from 1,291 nm to 1,304 nm.