• Journal of Broadcast Engineering
• /
• v.17 no.5
• /
• pp.725-733
• /
• 2012

MPEG and VCEG have constituted a collaboration team called JCT-VC(Joint Collaborative Team on Video Coding) and have been developing the HEVC(High Efficiency Video Coding) standard. The next generation video coding standard HEVC shows higher compression rate compared with the H.264/AVC standard, but the encoder computational complexity of the HEVC encoder is significantly high. In order to reduce this computational complexity in the HEVC encoder, a fast prediction unit decision is proposed. The proposed fast prediction unit decision method reduces the encoder complexity by skipping the remaining prediction units if the current prediction unit does not have any non-zero quantized transform coefficient. The proposed method reduces the encoder computational complexity by 50.3% comparing with HM6.0 but it maintains the same level of coding efficiency.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.5 no.1
• /
• pp.11-16
• /
• 1972

During the period from 1966 to 1968, total catches of Spanish mackerel averaged 6,000 to 7,000M/T per annual in Korea, and approximately 70 per cent of this amount was captured by drift nets. In an effort to improve the efficiency of drift nets, some experiments were conducted in 1969 to investigate the selectivity of material and mesh sizes. Seven different mesh sizes (80,85,95,100,105,110 and 115 mm) of both multi- and mono-filament netting were used, and the following results were obtained : 1, The body weight of Spanish mackerel taken with the seven different mesh sizes ranges from 0.5kg to 2.9kg, and the mode of body weight consists of three groups, 1kg ($21%$), 1.3kg($15\%$) and 1.5kg($19\%$). 2. For multi-filament net, 80 to 105mm mesh sizes were suitable to catch those three groups, and a little smalter than these for mono-filament net. 3. For Spanish mackerel only, the mono-filament material proved to have 1.5 times better selectivity than multi-filament : however, the latter proved superior for miscellaneous fish species due to its different size and shape. 4. Multi-filament net showed better selectivity for smaller species than mono-filament. (and mono-filament in general indicated opposite phenomenon.)

• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.871-880
• /
• 2015

Buddhist culture had a significant impact on the entire mode of Korean living after the introduction of Buddhism to Korea in the Three Kingdom Period. Baekje embraced Buddhism in 384 A.D.; subsequently, diverse artifacts have now been excavated from the temples. Various research on Korean temples are now in progress; however there is inadequate research on the relics and patterns excavated from the temples due to the focus on the temples’ architectural form. There is limited research on the development of fashion cultural products that use relics excavated from the temples. This study develops designs for fashion cultural products using Baekje Sabi Period relics; specifically, the sari container excavated from Buyeo’s Wangheungsaji, Neungsanrisaji, and Iksan’s Mireuksaji. The sari container’s original form, patterns, and writing were developed into patterns and applied to fashion products such as t-shirts, bags and scarves. Traditional multicolored paintwork exhibited on the temples, ‘dancheong’, was selected as the color for products that can symbolically express the nature of their origin. Adobe Illustrator CC and Adobe Photoshop CC were used to extract the motifs and develop the designs. Six patterns and nine fashion products were designed, accounting for a total of fifteen developed items. We hope that the fashion cultural product design expresses the distinct characteristics of Baekje’s Sabi Period and can be applied to various products and related fields.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.411-414
• /
• 2002

The CdTe semiconductor detector has a higher detection efficiency for x-rays and $\square$amma rays and a wider energy band gap compared with Si and Ge semiconductor detectors. Therefore, the size of the detector element can be made small, and can be operated at room temperature. The interaction between a CdTe detector and incident x-rays is mainly photoelectric absorption in the photon energy range of up to 100 keV. In this energy range, Compton effects are almost negligible. We have developed a 256 channel CdTe array detector system for monochromatic x-ray CT using synchrotron radiation. The CdTe array detector system, the element size of which is 1.98 mm (h) x 1.98 mm (w) x 0.5 mm (t), was operated in photon counting mode. In order to improve the spatial resolution, we tilted the CdTe array detector against the incident parallel monochromatic x-ray beam. The experiments were performed at the BL20B2 experimental hutch in SPring-8. The energy of incident monochromatic x-rays was set at 55 keV. Phantom measurements were performed at the detector angle of 0, 30 and 45 degrees against the incident parallel monochromatic x-rays. The linear attenuation coefficients were calculated from the reconstructed CT images. By increasing the detector angle, the spatial resolutions were improved. There was no significant difference between the linear attenuation coefficients which were corrected by the detector angle. It was found that this method was useful for improving the spatial resolution in a parallel monochromatic x-ray CT system.

• Journal of Convergence for Information Technology
• /
• v.10 no.6
• /
• pp.28-34
• /
• 2020

A structure in which GaAs and AlGaAs epilayers are formed with a metal organic chemical vapor deposition equipment on a GaAs wafer similar to the structure of making a vertical cavity surface emitting laser is used. Photonic Quantum Ring (PQR) devices that are naturally generated by 3D resonance are manufactured by chemically assisted ion beam etching technology, which is a dry etching method. A new technology that can be fabricated has been studied, and as a result, the possibility of wet etching of a solution containing phosphoric acid, hydrogen peroxide and methanol was investigated, and the device fabrication by applying this method are also discussed. In addition, the spectrum of the fabricated optical device was measured, and the results were theoretically analyzed and compared with the wavelength value obtained by the measurement. It is expected that the PQR device will be able to model cells in a three-dimensional shape or be applied to the display field.

• Journal of Internet Computing and Services
• /
• v.15 no.6
• /
• pp.99-106
• /
• 2014

Generation and analysis methods have been proposed in recent years, such as using a natural language and formal language processing, artificial intelligence algorithms based knowledge model is effective meaning. its semantic based knowledge model has been used effective decision making tree and problem solving about specific context. and it was based on static generation and regression analysis, trend analysis with behavioral model, simulation support for macroeconomic forecasting mode on especially in a variety of complex systems and social network analysis. In this study, in this sense, integrating knowledge-based models, This paper propose a text mining derived from the inter-Topic model Integrated formal methods and Algorithms. First, a method for converting automatically knowledge map is derived from text mining keyword map and integrate it into the semantic knowledge model for this purpose. This paper propose an algorithm to derive a method of projecting a significant topic map from the map and the keyword semantically equivalent model. Integrated semantic-based knowledge model is available.

• Journal of Welding and Joining
• /
• v.29 no.1
• /
• pp.99-106
• /
• 2011

Joint strength between a solder ball and a pad on a substrate is one of the major factors which have effects on electronic device reliability. The effort to improve solder joint strength via surface cleaning, heat treatment and solder composition change have been in progress. This paper will discuss the method of solder ball joint strength improvement using LF hydrogen radical cleaning treatment and focus on the effects of surface treatment condition on the solder ball shear strength and interfacial reactions. In the joint without radical cleaning, voids were observed at the interface. However, the specimens cleaned by hydrogen-radical didn't have voids at the interface regardless of cleaning time. The shear strength between the solder ball and the pad was increased over 120%(about 800gf) when compared to that without the radical treatment (680gf) under the same reflow condition. Especially, at the specimen treated for 5minutes, ball shear strength was considerably increased over 150%(1150gf). Through the observation of fracture surface and cross-section microstructure, the increase of joint strength resulted from the change of fracture mode, that is, from the solder ball fracture to IMC/Ni(P) interfacial fracture. The other cases like radical treated specimen for 1, 3, 7, 9min. showed IMC/solder interfacial fracture rather than fracture in the solder ball.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.2
• /
• pp.1-11
• /
• 2001

In this paper, a chattering alleviation VSS controller for the sinusoidal type BLDC motor is designed. Dead Zone function is proposed to change the chattering occurring in the transient state from high frequency to low frequency and time varying gains arc applied for the control input to eliminate the steady state excessive chattering in the conventional ISM. The proposed Dead Zone function represents the sliding layer composed of two switching surfaces and if a state vector exists in this layer, the chattering don't occur. Simulation and experimental results confirm the useful effects of the above algorithm.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.4
• /
• pp.27-31
• /
• 2004

This paper describes the development and fabrication of a high temperature superconducting motor which consists of HTS rotor and air-core stator. The machine was designed for the rated power of 100hp at 1800 rpm. The HTS field windings are composed of the double-pancake coils wound with AMSC's SUS-reinforced Bi-2223 tape conductor. These were assembled on the support structure and fixed by a bandage of glass-fiber composite. The cooling system is based on the heat transfer mechanism of the thermosyphon by using GM cryocooler as cooling source. The cold head is in contact with the condenser of a Ne-filled thermosyphon. The rotor assembly was tested independently at the stationary state and combined with stator. Characteristic parameters such as reactances, inductances, and time constants were determined to obtain a consistent overview of the machine operation properties. This motor has met all design parameters by demonstrating HTS field winding, cryogenic refrigeration systems and an air-core armature winding cooled with air. The HTS field winding could be cooled down below 30K. No-load test of open-circuit characteristics(OCC) and short-circuit characteristics(SCC) and load test with resistive load bank were conducted in generator mode. Maximum operating current of field winding at 30K was 120A. From OCC and SCC test results synchronous inductance and synchronous reactance were 2.4mH, 0.49pu, respectively. Efficiency of this HTS machine was 93.3% in full load(100hp) test. This paper will present design, construction, and basic experimental test results of the 100hp HTS machine.

• Anxiety and mood
• /
• v.10 no.2
• /
• pp.143-150
• /
• 2014

Objective : The subgenual cingulate cortex, a part of default-mode network, has been known to playa key role in the pathophysiology of depression. The previous studies have reported abnormal functional connectivity between the subgenual cingulate cortex and other brain regions in the patients with depression. The goal of this shldy was to explore the resting-state functional connectivity of the subgenual cingulate cortex between the patients with depression and healthy subjects. Methods : Twenty patients with major depression and age- and sex-matched 20 healthy subjects underwent 5-minute resting state fMRI scans. The functional connectivity map in each subject was acquired using seed-based correlation analysis with the seed located in the subgenual cingulate cortex (Talairach coordinates; x=-10, y=5, z=-10). The functional connectivity maps were calculated using AFNI and compared between the patient and healthy subject group via two-sample T-test using 3dttest++ in AFNI package. Results : Functional connectivity was decreased between the subgenual cingulate cortex and both sides of fusiform gyrus in depressed subjects. Connectivity was also decreased between the subgenual cingulate cortex and the left cerebellum in the patient group. There was no correlation between the severity of depression and the degree of functional connectivity between the subgenual cingulate cortex and the regions showing decreased functional connectivity. Conclusion : Decreased resting-state functional connectivity between the subgenual cingulate cortex and both sides of fusiform gyrus, and decreased connectivity between the subgenual cingulate cortex and the left cerebellum found in the patients with major depression in comparison to the healthy subjects might be related to abnormal emotional and cognitive processing of depressed patients.