• Korean Journal of Environmental Agriculture
• /
• v.21 no.4
• /
• pp.243-247
• /
• 2002

Irrigation water quality along Donjin river watershed was monitored to find a possible pollutant, for maintaining water quality to achieve food safety through water quality preservation of river. As a pollution indicators, such as Biological Oxygen Demand(BOD), Chemical Oxygen Demand(COD), Total Nitrogen(T-N), and Total Phosphate(T-P) in Dongjin river were examined from May to November in 2001. The results were as follows : The BOD level of Dongjin river ranged from 2.84 to 6.45 mg/L, which would be in a II$\sim$IV grade of the potable water criteria by Ministry of Environment. Averaged BOD level of downstream DJ6(After Jeongupcheon confluence) was 4.07 mg/L. The average COD level of Dongjin river ranged from 11.20 to 32.96 mg/L. COD level of DJ6 rapidly increased rapidly after the junction of Dongjin river and Jungupcheon because it showed the latter had relatively high pollution level. T-N content were significantly high in all sites of Dongjin river ranged through 4.16 to 5.84 mg/L. T-P examined high concentration than another thing point by 0.19 mg/L after Jeongupcheon confluence as BOD and COD. COD of main stream was expressed high concentration to dry season after rainy season. In case of T-P, pollution degree of dry season before rainy season appeared and examined that quality of water was worsened go by dry season after rainy season. The water quality of Dongjin river was deteriorated with inflow of Jungupcheon polluted by municipal and industrial sites near Jungup city.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.325-335
• /
• 2008

The junction between resilient denture liner and the denture base is difficult to finish and polish due to difference of the physical property of the materials. Gaps tend to be formed during finishing and polishing procedures. The purpose of this study was measuring the width of junctional gap between $Molloplast-B^{(R)}$ and denture base material after finishing and polishing procedure, and evaluating the effect of method and direction on gap width. $Molloplast-B^{(R)}$ was processed (according to the manufacturer's instruction) against Lucitone $199^{(R)}$ acrylic resin. 50 specimens were fabricated with a raised center section. All of specimens were examined and photographed with a stereoscopic microscope(x120), and the largest gap along the junction of $Molloplast-B^{(R)}$ and acrylic resin on each specimen was measured. One-way analysis of variance(ANOVA) and independent t-test at 95% confidence level were used to analyze the data and to compare groups. The results of this study were as follows. In comparison with finishing tools, the gap width was the largest in $Molloplast^{(R)}$-Cutter and the smallest in FSQ-cross cut bur. There was statistically significant difference between FSQ-cross cut bur and $Molloplast^{(R)}$-Cutter(p<0.05). There was no significant difference in gap width between the direction of polishing. The mean value of gap width was the smallest in case of no polishing, and the largest in case of polishing with pumice & tin oxide. There was statistically significant difference between pumice and pumice & tin oxide. From the results, it is concluded that the use of $Molloplast^{(R)}$-Cutter in clinic need serious consideration even though it has good cutting ability. Further careful study is needed for finishing and polishing methods for decreasing gap width in junction of two materials.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.4
• /
• pp.451-455
• /
• 2001

Objectives : There have been several studies documenting the changing level of the conus throughout infancy and childhood, but there is only a little detailed study that documents the range of conus positions in a living adult population, especially in Korean, without spinal deformity. Methods : we made a sequential study of magnetic resonance images of the lumbar spine to determine the variation in position of the conus medullaris in 650 living korean adults population without spinal deformity who checked MRI to identify the cause of low back pain. The study population consisted of patients over the age of 16 years. A T1-weighted, midline, sagittal image was reviewed for identifying the postion of conus. This location was recorded in relation to the upper, middle, or lower third of the adjacent vertebral body or the adjacent intervertebral disc. Results : The study group consisted of 305 men(47%) and 345 women(53%) with a mean age 45.9 years(range, 16-79 years). The conus existed commonly at the middle third of L1(131cases, 20.2%), at the L1-2 intervertebral space(129cases, 19.8%), and the lower third of L1(123cases, 18.9%). The mean position of conus was the lower third of L1(range, middle third of T12 to middle third of L3). Conclusions : The mean position of conus was at the lower third of L1(range, middle third of T12 to middle third of L3). This results was same as that of foreign study. Our results of living korean adult population could allow for safe clinical procedures such as lumbar puncture, spinal anesthesia, and help to explain the differences among observed neurologic injuries from fracture-dislocation at the thoracolumbar junction.

• Journal of Radiation Protection and Research
• /
• v.24 no.1
• /
• pp.45-53
• /
• 1999

Fluorescence in situ hybridization with chromosome-specific probe has been shown to be a valid and rapid method for detection of chromosome rearrangements induced by radiation. This method is useful for quantifying structural aberrations, expecially for stable ones, such as translocation and insertion, which are difficult to detect with conventional method in human lymphocyte. In order to apply FISH method for high dose biological dosimetry, chromosomal abberations by radiation at doses of 1, 3, 5, and 7Gy were analysed with whole chromosome-specific probes by human chromosome 1, 2 and 4 according to PAINT system. The frequencies of stable translocation per cell equivalent were 0.04, 0.33, 1.22, 2.62, and 5.58 for the lymphocyte exposed to 0, 1, 3, 5, and 7Gy, respectively, and those of dicentric were 0.00, 0.06, 0.52, 1.19 and 2.44, respectively. Significantly more translocation of t(Ab), a translocated chromosome with a piece of painted acentric matrial 'b' attached to unpainted piece containing centromere 'A', than reciprocal chromosome t(Ba) was observed. The frequencies of all type of chromosome rearrangements increased with dose. From above result, FISH seemed to be useful for radiation biodosimetry by which the frequencies of various types of stable aberrations in human lymphocyte can be observed more easily than by conventional method and so will improve our ability to perform meaningful biodosimetry.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.5 no.2
• /
• pp.155-160
• /
• 2006

Purpose: To evaluate the results of meniscal repair and partial meniscectomy of lateral meniscus injury associated with tibial plateau fracture. Materials and Methods: Between February 1993 and August 2004, 24 cases (23 patients) of lateral meniscus tear with tibial plateau fracture were evaluated retrospectively. The most frequent type of tear was the longitudinal tear of the meniscocapsular junction (14 cases, 66.7%). All fractures were reduced under the control of arthroscopic and image intensifier. Arthroscopic repair of the longitudinal tear of the lateral meniscus or arthroscopic partial meniscectomy was performed. The final results were evaluated with the Ikeuchi criteria and Lysholm score. Results: At the final follow-up, the outcome was excellent in 12 cases (85.7%), good in 1 case (7.1%) and fair in 1 case (7.1%) among 14 cases of meniscal repair, and the excellent in 4 cases (66.7%) and good in 2 cases (33.3%) among 6 cases of partial meniscectomy according to the Ikeuchi criteria, There was a significant improvement of Lysholm score after surgery, 92.3 postoperatively compared with 56.6 preoperatively (p<0.0001, paired t-test). Conclusion: The fracture of the lateral tibial plateau did not seem to affect on the healing of the meniscus repair and partial meniscectomy.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.17 no.1
• /
• pp.271-278
• /
• 1987

The purpose of the present study was to investigate associations between periapical and bitewing techniques by assessing the crestal alveolar bone. This article also reports the ability of these two techniques to correctly detect evidence of interproximal dental caries, and comparison between the interproximal overlapping of teeth. Bitewing and periapical radiographs were used from posterior quardants of 243 dental students in Seoul National University. The distance from cemento-enamel junction to the alveolar crest (CEJ-AC) was measured for each proximal surface from the distal of cuspid to the distal of second molar. Data were arranged according to the proximal surface examined, and bitewing and periapical measurements were compared using paired tests. The obtained results were as follows: 1. In maxilla, a significant t ratio with a P value of 0.05 or less reached for 100% and in mandible, reached for 94%. 2. The anatomic limitations imposed on periapical radiographic technique, most often result in somewhat foreshortened radiographic images. This situation would tend to be accentuated by the anatomical restrictions of the hard palate. 3. Consequently, since the significant differences frequently exist between measurements obtained from bitewing and periapical techniques, it is important to define which technique is used. 4. The number of the interproximal overlapping was the largest medial side of the maxillary second molar, while the smallest at the distal side of the mandibular second premolar. And the overall number of the interproximal overlapping was more (538) in the periapical technique than in the bitewing technique (372). 5. The interproximal dental carious lesions were detected more (74) on the bitewing films than on the periapical ones (23). The fact was resulted from the small number of interproximal overlapping and relative easi- ness of obtaining horizontal angulation in taking the bitewing radiographs.

• Journal of Periodontal and Implant Science
• /
• v.23 no.1
• /
• pp.56-66
• /
• 1993

The Langerhans cells are dendritic nonkeratinocytes found suprabasally in most stratified squamous epithelia, such as human epidermis and the epithelium of the oral mucosa including that of gingiva. After Paul Langerhans found it in the skin in 1968, there have been sturdies of it's function and distribution . Stingle et al. reported that the Langerhans cells seem able to present antigens and to stimulate T-lymphocytes. Shelley et al. discovered that they can take up contact allergens. Accordingly it has been suggested that Langerhans cells are important elements of p Peripheral cell mediated immune system. In this study, the gingival tissue of a adult periodontitis patient was taken and freeze dried. In one specimen, we used the CD1 monoclonal antbody to staining the Langerhans cell. The other specimen, we embedded in paraffin and staining it with S-100 monoclonal antibody. The purpose of this study was to use these specimens to find out the distribution, orientation, morphology of the Langerhans cell and to discover the increase or decrease of Langerhans cell in an increased inflammatory state. The results were obtained as follows : 1. Langerhans cells were distributed between the basal cell layer and spinous cell layer against the CD1 & S-100 monoclonal antibody. 2. Langerhans cessl were plentiful in the oral eptihelium, and there was very little in the sulcular epithelium. 3. There were no Langerhans cell in the junction epithelium and pocket lining epithelium. 4. The number of Langerhans cells that responsed to the CD1 & S-100 monoclonal antibody had a statistically difference. 5. As the infiltration of the lymphocyte into the connective tissue were increased, the number of Langerhans cells in the epithelium were increased. 6. As the inflammation was increased, Langerhans cells in the spinous cell layer were more increased than those of the basal layer.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.9
• /
• pp.1199-1203
• /
• 2011

The objective of this study was to examine the binding potential of sperm to the epithelium of the sperm storage tubules (SST) in vitro and in vivo to assess the functional maturation of fowl sperm. Sperm from the testis, epididymis, as well as the proximal, middle and distal vas deferens were incubated in vitro with either the uterovaginal junction (UVJ)- or infundibular tissue containing SST at $39^{\circ}C$ for 30 min. Aliquots of sperm were also artificially inseminated into the uteri of hens, and the UVJ and infundibulum were collected 24 h post artificial insemination (AI). After incubation and AI, tissues were washed to remove loosely adhered sperm and subjected to fluorescence staining with 4', 6-diamidino-2-phenylindole, dihydrochloride (DAPI) for counting the number of bound sperm per 0.25 mm2 of surface area. Sperm from the testis, epididymis, and the three segments of the vas deferens exhibited their differential (p<0.05) binding capacity, which increased gradually from the testicular to distal vas deferens sperm under both in vitro and in vivo conditions. Existing similar trend, sperm, regardless of their source had a lesser affinity to bind to the epithelium of the infundibular SST than to the UVJ-SST. These experimental results suggested that fowl sperm may undergo gradual changes in the process of functional maturation, whereby they gain the ability to bind to the epithelium of the SST during their passage through the male reproductive tract (MRT).

• The Journal of Internal Korean Medicine
• /
• v.33 no.1
• /
• pp.26-38
• /
• 2012

Objectives : The aim of this study was to investigate the effect of partial pyloric obstruction on body weight, gastric juice, gastric surface area and gastric edema in normal intact and/or vagotomized rats. Methods : Partial pyloric obstruction was performed by wrapping a non-absorbable rubber ring (D:6 mm, W:4 mm, T:1 mm) around the 1st portion of the duodenum. Vagotomy was performed by resecting the branches around the esophagogastric junction. Pre-post body weight differential, fasting gastric juice volume, gastric surface area and gastric edema were measured at 8 weeks and 20 weeks. For the effect of pyloric reperfusion the rubber ring was removed after 8 weeks and then an additional 12 weeks of observation was performed to the end of the 20-week experimental period. Results : In the initial 8 weeks observation, the effect of pylorus obstruction and/or vagotomy was significantly remarkable in the pylorus obstructed and vagotomized group; slowdown of weight gain, increase of fasting gastric juice volume, dilatation of gastric surface area and severe gastric edema were shown. In the remaining 12 weeks observation, the effect of reperfusion was significantly remarkable in the ring-removed antral dilated group; recovery of weight gain, decrease of gastric surface area and decrease of gastric edema were shown. However, gastric juice volume was not significantly different from the other group. Conclusions : Partial pyloric obstruction plays a aggravating role and the vagus nerve plays a protective role in body weight, gastric juice, gastric surface area, and gastric edema. Furthermore, pyloric valve dysfunction as an aggravating factor strengthened in defect of the vagus nerve. These results suggest that patients with both functional pyloric outlet obstruction and hypofunction of vagus nerve need to be diagnosed in good time and treated properly.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.164-164
• /
• 2013

Among multicomponent nanostructures, hybrid nanocatalysts consisting of metal nanoparticle-semiconductor junctions offer an interesting platform to study the role of metal-oxide interfaces and hot electron flows in heterogeneous catalysis. In this study, we report that hot carriers generated upon photon absorption significantly impact the catalytic activity of CO oxidation. We found that Pt-CdSe-Pt nanodumbbells exhibited a higher turnover frequency by a factor of two during irradiation by light with energy higher than the bandgap of CdSe, while the turnover rate on bare Pt nanoparticles didn't depend on light irradiation. We also found that Pt nanoparticles deposited on a GaN substrate under light irradiation exhibit changes in catalytic activity of CO oxidation that depends on the type of doping of the GaN. We suppose that hot electrons are generated upon the absorption of photons by the semiconducting nanorods or substrates, whereafter the hot electrons are injected into the Pt nanoparticles, resulting in the change in catalytic activity. We discuss the possible mechanism for how hot carrier flows generated during light irradiation affect the catalytic activity of CO oxidation.