• Journal of Korean Neurosurgical Society
• /
• 제30권5호
• /
• pp.600-604
• /
• 2001

Objective : The authors report the microsurgical anterolateral tunnel approach for the treatment of the cervical disc diseases and its postoperative surgical results. Methods : All surgical procedures followed the method of classical microsurgical anterior discectomy. Small tunnel(7-8mm) was made on the disc space reaching to the posterior longitudinal ligament. The disc materials and bony spurs were removed through this tunnel. Thirty-one patients of cervical disc herniation(24 cases with pure disc herniation, 7 cases with combined cervical spondylosis) were evaluated on the symptoms, conformation in plain X-ray, C-T, and MRI. The follow up time was over 2 years. Results : Postoperatively the result(following the out come scale) was excellent and good in Twenty-nine patients. One with fair result showed remnant disc particle and spur and another one is combined with cord contusion. One patient with lesion in C 3-4 space and two cervicothoracic junction showed excellent result. Two patients with osteoporosis also showed good results. Cervical spine curvature and disc space height were not changed on the plain X-ray and MRI in all patients. Twenty-nine patients were discharged within 3 days after surgery without any postoperative complications. Conclusions : The microsurgical anterolateral tunnel approach could be indicated for the treatment of patients with cervical disc diseases and with difficulty in achieving interbody fusion(the higher cervical level and cervicothoracic junction, osteoporosis etc.).

• 대한전자공학회논문지SD
• /
• 제45권8호
• /
• pp.1-10
• /
• 2008

본 논문에서는 새로운 스위칭 방식인 LFS (Local Field Switching)을 이용하여 설계한 128비트 MRAM (Magnetoresistive Random Access Memo교)에 대해 기술하였다. LFS 방식은 MTJ (Magnetic Tunnel Junction)를 직접 통과해 흐르는 전류에 의해 형성되는 국소 자기장을 이용하여 MTJ의 극성을 변환시킨다. 이 방식은 MTJ와 전류의 거리가 가깝기 때문에 작은 전류로도 충분히 큰 자기장을 형성하므로 writing current가 적어도 된다. 또한 Digit Line이 없어도 되므로 half select disturbance가 발생하지 않아 기존 MTJ를 이용한 방식에 비해 셀 선택도가 우수하다. 설계한 MRAM은 IT(트랜지스터)-1MTJ의 메모리 셀 구조를 가지며 양방향 write driver와 mid-point reference cell block, current mode sense amplifier를 사용한다. 그리고 MTJ 공정 없이 회로 동작을 확인하기 위해 LFS-MTJ cell을 CMOS emulation cell로 대체하였다. 설계한 회로를 6 metal을 사용하는 $0.18{\mu}m$ CMOS 공정으로 구현하였고 제작된 chip을 custom board 상에서 테스트하여 동작을 확인하였다.

• 한국도로학회논문집
• /
• 제14권6호
• /
• pp.85-92
• /
• 2012

PURPOSES : Since expressways in South Korea are toll roads, many trumpet type interchanges exist, resulting in the installation of loop ramps very frequently. While the travel speed of the main lane is designed to be 100-110 km/h, the structure of a loop ramp is different and is designed for a minimum speed of 40 km/h. In fact, most of the actual travel speeds measured on the ramp exceed the designated speed, which has been a major problem in traffic safety. In this research, a type of pavement marking speed-reduction treatment called the "Peripheral Transverse Line" is installed on expressway loop ramps in order to study the change of driving speeds after the installation. METHODS : To verify statistically the change, this speed-reduction treatment has been installed on the Chungju interchange and the Yeoju junction. The driving speeds before the installation were compared with driving speeds both one month and five monthsafter the installation. RESULTS : As a result, the reductions of the average driving speeds after the treatment were statistically significant. More specifically, the average driving speeds of the Chungju interchange were reduced by 7.1-7.7 % for its tangent road section, and the speeds decreased by 8.5-9.5 % for its curve section. Similarly, in the Yeoju junction, an average speed reduction of 2.9-4.8 % for its tangent section was measured, along with 3.9% long-term speed reduction for its curve section. CONCLUSIONS : Since the pavement marking speed-reduction treatment has been partially proven to be effective from this research, we expect to expand this treatment and re-confirm the effect from a long-term perspective in the future.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제3권2호
• /
• pp.69-75
• /
• 2003

Cell transistor and data retention time characteristics were studied in 90 nm design rule 512M-bit DRAM, for the first time. And, the characteristics of cell transistor are investigated for different STI gap-fill materials. HDP oxide with high compressive stress increases the threshold voltage of cell transistor, whereas the P-SOG oxide with small stress decreases the threshold voltage of cell transistor. Stress between silicon and gap-fill oxide material is found to be the major cause of the shift of the cell transistor threshold voltage. If high stress material is used for STI gap fill, channel-doping concentration can be reduced, so that cell junction leakage current is decreased and data retention time is increased.

• Journal of Animal Science and Technology
• /
• 제53권6호
• /
• pp.549-561
• /
• 2011

Livestock wastewater is being discharged without treatment from Hasen's pig farm cluster in WangGoong (WG) area into the Iksan Stream, eventually flowing into the ManGyung (MG) at the upstream junction. Although it is well known that before discharge, wastewater must satisfy the pig slurry discharge standards; because of ongoing remodeling, proper treatment is not being performed. According to public records, wastewater from the WG pig farm cluster is responsible for 3.6% of MG River pollution and 2.0% of the SaeManGuem (SMG) Reservoir pollution. As a result, upstream water treatment quality has become primary concern for development of the SMG project. All physicochemical constituents and pathogenic microbes, such as chemical oxygen demand ($COD_{Cr}$), biochemical oxygen demand ($BOD_5$), total suspended solids (TSS), total nitrogen (TN), total phosphorous (TP), fecal coliforms, Escherichia coli and Salmonella at the effluent of WG Plant (S-1) exceed the effluent standards. This is mainly due to insufficient wastewater treatment: the WG Plant is under renovation to increase water purification efficiency. By comparing the water quality at the S-7 junction, where the the Iksan Stream (pig farms) and the Wanggoong Stream (no pig farms) merge, it is clear that farming facilities and improper treatment can critically affect surrounding water quality. While it is clear throughout this study that the level of all physicochemical parameters and pathogenic microbes along the Stream decreased due to sedimentation, biodegradation and/or dilution. An alarming problem was discovered: the existence of pathogenic microbe count(E coli, Salmonella) in the lagoon wastewater and the stream water. Not only were high concentrations of these pathogens themselves found, but the potential existence of more serious pathogens could rise to more dangerous conditions.

• 한국진공학회지
• /
• 제1권1호
• /
• pp.176-182
• /
• 1992

CVD 텅스텐의 응력 및 접합 누설전류 특성을 조사하였다. 응력-연속 어닐링온도 의 그래프는 냉각곡선의 응력이 가열곡선의 그것보다 더 높게 나타나는 이력현상을 보인다. SiH4 환원에 의하여 증착된 텅스텐 막이 수소환원에 의하여 증착된 막보다 전반적으로 내부 응력 뿐만 아니라 열 응력도 더 큰 것으로 나타났으며 전자가 후자에 비해 실리콘 기판과의 부착특성이 불량한 것도 이러한 응력차와 유관한 것으로 생각된다. SiH4 환원에 의하여 형 성된 텅스텐 막은 상온에서 인장 응력 상태에 있으며, 온도가 증가됨에 따라 응력이 감소하 다가 $700^{\circ}C$ 부근에서 압축 응력 상태로 바뀌고, 계속 더 온도가 증가됨에 따라 압축 응력 이 급격히 증가한다. SiH4 환원에 의한 텅스텐 막의 증착 온도가 증가함에 따라 n+/p 접합 의 누설전류가 크게 증가하며, 특히 $400^{\circ}C$로 온도가 증가함에 따라 누설전류의 증가폭이 크게 나타났는데, 이것은 수소환원 반응시와 유사하게 텅스텐의 침투(encroachment)에 의 한 실리콘 소모가 그 원인이다. SiH4/WF6 유속비의 증가에 따라서도 누설전류가 증가하는 데 그 효과는 미소한 것으로 나타났다.

• 한국표면공학회지
• /
• 제48권6호
• /
• pp.297-302
• /
• 2015

Nanocrystalline diamond(NCD) coated aluminium plates were prepared and applied as heat sinks for LED modules. NCD films were deposited on 1 mm thick Al plates for times of 2 - 10 h in a microwave plasma chemical vapor deposition reactor. Deposition parameters were the microwave power of 1.2 kW, the working pressure of 90 Torr, the $CH_4/Ar$ gas ratio of 2/200 sccm. In order to enhance diamond nucleation, DC bias voltage of -90 V was applied to the substrate during deposition without external heating. NCD film was identified by X-ray diffraction and Raman spectroscopy. The Al plates with about 300 nm thick NCD film were attached to LED modules and thermal analysis was carried out using Thermal Transient Tester (T3ster) in a still air box. Thermal resistance of the module with NCD/Al plate was 3.88 K/W while that with Al plate was 5.55 K/W. The smaller the thermal resistance, the better the heat emission. From structure function analysis, the differences between junction and ambient temperatures were $12.1^{\circ}C$ for NCD/Al plate and $15.5^{\circ}C$ for Al plate. The hot spot size of infrared images was larger on NCD/Al than Al plate for a given period of LED operation. In conclusion, NCD coated Al plate exhibited better thermal spreading performance than conventional Al heat sink.

• 한국전문물리치료학회지
• /
• 제28권3호
• /
• pp.227-234
• /
• 2021

Background: The serratus posterior inferior (SPI) muscle originates from the spinous process of T11-L2 and inserts at the lower border of the 9-12th ribs. This muscle is involved in thoracolumbar rotation and stability. Several positions can be used to improve trunk stability; the quadruped position is a good position for easily maintaining a neutral spine. In particular, during one arm lifting, various muscles act to maintain a neutral trunk position, and the SPI is one of these muscles. If trunk stability is weakened, uncontrolled trunk rotation may occur at this time. Tape can be used to increase trunk stability. There have been no studies on the effect of taping applied to the SPI muscle on thoracolumbar junction (TLJ) stability. Objects: This study compared the TLJ rotation angle between three different conditions (without taping, transverse taping, and SPI muscle direction taping). Methods: Thirty subjects were recruited to the study (18 males and 12 females). The TLJ rotation angle was measured during one arm lifting in a quadruped position (ALQP). Two taping methods (transverse and SPI muscle direction taping) were applied, and the TLJ rotation angle was measured in the same movement. Results: SPI muscle direction taping significantly reduced TLJ rotation compared to that without taping (p < 0.001) and with transverse taping (p < 0.001). There was a significant difference in the TLJ rotation angle between transverse taping and SPI muscle direction taping (p < 0.017). Conclusion: SPI muscle direction taping reduces the TLJ rotation angle during ALQP. Therefore, SPI muscle direction taping is one method to improve TLJ stability and reduce uncontrolled TLJ rotation during ALQP.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.178-184
• /
• 1999

We have measured I-V characteristics of Bi$_2Sr_2CaCu_2O_{8+{\delta}}$ mesa containing a small number of intrinsic stacked Josephson junctions in a magnetic field. We fabricated mesa with an area of 40${\times}$40 ${\mu}$m$^2$ containing 3${\sim}$20 intrinsic junctions. We applied magnetic field perpendicular to He CuO$_2$ planes up to 5T. We observed flux-flow branches and flux-flow steps in the I-V characteristics which might be due to collective motion of Josephson vortices in the long junction limit. In a parallel field, critical current I$_c$ varies as I$_c$(B) ${\sim}$ exp(-B/B$_0$), where B$_0$ is about 2T, which is consistent with the theoretical model. DC and AC intrinsic Josephson effects are also discussed.

• 한국물환경학회지
• /
• 제28권2호
• /
• pp.320-331
• /
• 2012

A combination system of catch canal and constructed wetland was designed and suggested to improve water quality in gagricultural region of lower Dong-jin river basin. In order to evaluate an water quality improvement efficiency of the designed combination system, the NPS-WET model was applied in this study. Simulation result of the NPS-WET shown that the nutrient load removal rate of constructed wetland was BOD, T-N, T-P and SS was 30.7~39.0%, 46~60%, 40.7~57.0% and 68.2~74.7%, respectively. Nutrients reduction of constructed wetland was higher in growing season than winter season because vital activity of microorganism, macrophyte and algae was augmented with high air and water temperature. Effluents from constructed wetland can affect water-quality of catch canal drains, especially, water-quality on junction point to Dong-jin river. Water-quality improvement in low-flowed catch canal (Un-san) was more significant than in high-flowed catch canal (Won-pyeong). In conclusion, a feasible design of constructed wetland is necessary to treat large quantity of receiving water. The NPS-WET is useful tool for assessing water-quality improvement efficiency using constructed wetland.