• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.94-94
• /
• 2008

We have performed simulation for Junction Field Effect Transistor(JFET) using Silvco to improve its electrical properties. The device structure and process conditions of Si-control JFET(Si-JFET) were determined to set its cut off voltage and drain current(at Vg=0V) to -0.5V and $300{\mu}A$, respectively. From electrical property obtained at various implantation energy, dose, and drive-in conditions of p-gate doping, we found that the drive in time of p-type gate was the most determinant factor due to severe diffusion. Therefore we newly designed SiGe-JFET, in which SiGe layer is to epitaxial layers placed above and underneath of the Si-channel. The presence of SiGe layer lessen the p-type dopants (Boron) into the n-type Si channel the phenomenon would be able to enhance the structural consistency of p-n-p junction. The influence of SiGe layer will be discussed in conjunction with boron diffusion and corresponding I-V characteristics in comparison with Si-control JFET.

• Journal of Periodontal and Implant Science
• /
• 제30권3호
• /
• pp.651-661
• /
• 2000

A mucogingival grafting procedure has been developed to cover denuded root surface. The subepithelial connective tissue graft technique is very predictable and allows for a good esthetic results and minimum patient discomfort on the palate. However, in areas where there is a lack of vestibular depth and keratinized attached tissue, the presence of frena or heavy muscle attachment, covering the connective tissue graft with a mucosal flap is very difficult. The purpose of this study is to evaluate an alternative technique of root coverage using the free connective tissue graft. The results were as follows: 1. Probing depths didn't seem to vary significantly from the preoperative to postoperative period. 2. The amount of keratinized tissue showed an increase of $5.9{\pm}0.97mm$ from the preoperative level. 3. Total clinical exposed root coverage increase 72.2% compare with preoperative level. 4. The shrinkage from gingival margin is $4.2{\pm}1.15mm$ and the mean shrinkage rate is 40.1%. 5. The depth of the vestibule increased with the average distance from cementoenamel junction to mucogingival junction being $7.4{\pm}1.65mm$.

• Progress in Superconductivity
• /
• 제4권2호
• /
• pp.109-113
• /
• 2003

We have developed a planar-type single layer second-order $high-T_{c}$ SQUID gradiometer, which can detect the $d^2$$B_{z/}$dxdy of the second-order field gradient. This SQUID gradiometer consists of four-way 'clover-leaf' pick-up loops and is coupled directly to a 4-junction dc SQUID in such a way that the coupling polarity of the two diagonal loops is opposite to that of the other two loops. The pickup loops are intrinsically balanced for both uniform field and the 1 st-order field gradient. The $YBa_2$$Cu_3$$O_{7}$ thin film was made by pulsed laser deposition method on $SrTiO_3$ single crystal substrate and patterned by photolithography with Ar ion milling technique. Response of this gradiometer was tested for both uniform field and the 2nd-order field gradient. Details of the design, fabrication, and results will be discussed.

• Progress in Superconductivity
• /
• 제4권2호
• /
• pp.99-103
• /
• 2003

We studied the nonequilibrium superconductivity due to tunnel injection of polaronic quasiparticle (QP) from organic photoconductor. The transport properties of an organic copper (II) phthalocyanine (Cu -Pc)/d-wave superconductor were investigated in dark and under ultraviolet (UV) radiation for performance of a novel $high -T_{c}$ superconducting three terminal device. We observed that the injection of polaronic QP from the organic Cu -Pc film into the $Bi_2$S $r_2$$CaCuO_{8+{\delta}}$ film generated a substantially larger nonequilibrium effect as compared to the normal QP injection current. We could increase the current gain by UV excitation of the organic photoconductor injector. The tunneling spectroscopy of a Cu -Pc/BSCCO junction exhibited a small enhancement of the zero bias conductance peak under the W excitation. The above phenomena are of importance in developing optically controlled three terminal superconducting device.e.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.165-168
• /
• 2000

We fabricated ramp-edge Josephson junctions with barriers formed by interface treatments instead of epitaxially grown barrier layers. A low-dielectric Sr$_2$AlTaO$_6$(SAT) layer was used as an ion-milling mask as well as an insulating layer for the ramp-edge junctions. An ion-milled YBa$_2$Cu$_3$O$_{7-x}$ (YBCO)-edge surface was not exposed to solvent through all fabrication procedures. The barriers were produced by structural modification at the edge of the YBCO base electrode using high energy ion-beam treatment prior to deposition of the YBCO counter electrode. We investigated the effects of high energy ion-beam treatment, annealing, and counter electrode deposition temperature on the characteristics of the interface-controlled Josephson junctions. The junction parameters such as T$_c$, I$_c$c, R$_n$ were measured and discussed in relation to the barrier layer depending on the process parameters.

• Progress in Superconductivity
• /
• 제2권1호
• /
• pp.43-46
• /
• 2000

We report on the tunneling spectroscopy of tunnel junctions using d-wave superconductor in relation to Andreev reflection. The zero bias conductance peak (ZBCP) which has maximum on [110] direction of ab-plane is observed on metal $Au/YBa_2Cu_3O_y$ tunnel junctions while it is suppressed on the ferromagnetic $Co/Au/YBa_2Cu_3O_y$ tunnel junctions. The effects of Andreev reflection on the differential conductance of each junction are dependent on the tunnel direction. For the $Co/Au/YBa_2Cu_3O_y$ junction, the suppression of Andreev reflection takes place by spin-polarized quasiparticles tunneling from a ferromagnetic material to a d-wave superconductor. By comparing these experimental results with recent theoretical works on Andreev reflection, the existence of Andreev bound state due to the d-wave symmetry of the pair potential is verified in high-$T_c$ superconductor.

• Transactions on Electrical and Electronic Materials
• /
• 제18권1호
• /
• pp.30-34
• /
• 2017

The building integrated photovoltaic system (BIPV) attracts attention with regard to the future of the photovoltaic (PV) industry. It is because one of the promising national and civilian projects in the country. Since land area is limited, there is considerable interest in BIPV systems with a variety of angles and shapes of PV panels. It is therefore expected to be one of the major fields for the PV industry in the future. Since the irradiation is different from each installation angle, the output can be predicted by the angles. This is critical for a PV system to be operated at maximum power and use an efficient design. The development characteristics of tilted angles based on data results obtained via long-term monitoring need to be analyzed. The ratio of the theoretically available and actual outputs is compared with the installation angles of each PV module to provide a suitable PV system for the user.

• Structural Engineering and Mechanics
• /
• 제13권5호
• /
• pp.465-478
• /
• 2002

This study lays emphasis on the development of efficient analytical models for a multistory structure with wings, including the in-plane deformation of floor slabs. For this purpose, a multistory structure with wings is regarded as the combination of multistory structures with rectangular plan and their junctions. In addition, a multistory structure with a rectangular plan is considered to be an assemblage of two-dimensional frames and floor slabs connecting two adjacent frames at each floor level. This modeling, concept can be easily applied to multistory structures with plans in the shape of L, T, Y, U, H, etc. To represent the in-plane deformation of floor slabs efficiently, a two-dimensional frame and the floor slab connecting two adjacent frames at each floor level are modeled as a stick model with two degrees of freedom per floor and a stiff beam with shear deformations, respectively. Three models are used to investigate the effect of in-plane deformation of the floor slab at the junction of wings on the seismic behavior of structures. Based on the comparison of dynamic analysis results obtained using the proposed models and three-dimensional finite element models, it could be concluded that the proposed models can be used as an efficient tool for an approximate analysis of a multistory structure with wings.

• 대한영상의학회지
• /
• 제84권6호
• /
• pp.1290-1308
• /
• 2023

목적 직장암 병기결정에서 직장 CT의 진단능을 고해상도 직장 MRI 및 병리결과와 비교분석 하였다. 대상과 방법 초음파 젤을 이용하여 직장을 팽창시킨 후 얻은 직장 CT와 고해상도 직장 MRI를 촬영한 66명의 직장암 환자가 포함되었다. 두 명의 위장관 영상의학과 의사가 직장 CT와 MRI에서 항문피부선/항문직장경계까지의 거리, 직장간막근막까지의 거리, 벽외침범 깊이, 직장간막외 림프절 침범, 벽외정맥침범, 및 T/N 병기를 평가하였다. 동시화학방사선요법을 시행 받지 않고 근치적 수술을 시행한 20명의 환자의 CT 소견을 병리결과와 비교하였다. 급내상관분석 및 카파 분석을 이용하여 통계 분석하였다. 결과 항문피부선/항문직장경계까지의 거리 측정에서 두 명의 영상의학과 의사 모두 CT와 MRI 간에 높은 상관관계를 보였다. 벽외침범 깊이, 직장간막근막까지의 거리, 림프절의 유무, 직장간막외 림프절 침범, 벽외정맥침범, T 병기 결정에서 CT와 MRI 간의 높은 일치도를 보였다. 수술을 시행받은 20명의 환자에서 T 병기, 측방절제연 침범, 벽외정맥침범, 림프절 전이 결정에서 CT는 병리결과와 만족할만한 일치율을 보였다. 결론 직장암 전용 CT는 직장암 환자의 병기 결정에 중요한 정보를 제공하며, 진단능은 고해상도 직장 MRI와 유사하다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.133-133
• /
• 1999

We have fabricated and tested a simple circuit of the rapid single-flux-quantum(RSFQ) four-stage shift register using a single layer high-T$_c$ superconducting (HTS) YBa$_2Cu_3O_{7-x}$ (YBCO) thin film structure with 9 step-edge Josephson junctions. The circuit includes two read superconducting quantum interference devices(SQUID) and four stages. To establish a robust HTS RSFQ device fabrication process, we have focussed the reproducible process of sharp and straight step-edge formation as well as the ratio of film thickness to step height t/h. The spread of step-edge junction parameters was measured from each13 junctions with t/h=l/3, l/2, and 2/3 at various temperatures. We have demonstrated the simplified operation of the shift register at 65 K..