• Title/Summary/Keyword: T-Junction

Search Result 399, Processing Time 0.024 seconds

The Effect of Feeding Processed Soy Protein on the Growth Performance and Apparent Ileal Digestibility in Weanling Pigs

  • Min, B.J.;Hong, J.W.;Kwon, O.S.;Lee, W.B.;Kim, Y.C.;Kim, I.H.;Cho, W.T.;Kim, J.H.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.17 no.9
    • /
    • pp.1271-1276
    • /
    • 2004
  • For Exp. 1, one hundred twenty Duroc${\times}$ Yorkshire${\times}$Landrace pigs (6.34${\pm}$ 0.70 kg average initial BW) were used in a 35 d growth assay. There were six pigs per pen and four pens per treatment. Dietary treatments included 1) NC (negative control; basal diet), 2) PC (positive control; added 5% HP $300^{(R)}$, HAMLET PROTEIN A/S, as protein source), 3) PSP 2.5 (added 2.5% $Pepsoygen^{(R)}$, Genebiotech Co. Ltd., as protein source), 4) PSP 5.0 (added 5% $Pepsoygen^{(R)}$ as protein source), and 5) PSP 7.5 (added 7.5% $Pepsoygen^{(R)}$ as protein source). For d 21, ADFI was increased in pigs fed PSP diets compared with PC diet (p<0.05). ADG was tended to improve as concentration of PSP in the diets was increased. For d 21-35 and entire experimental period, pigs fed PSP diets had more feed intake than pigs fed NC or PC diets (p<0.05). For the whole period, ADG was improved in PSP treatments compared with NC treatment (Linear effect, p=0.05). On d 21 and d 35, digestibilities of DM and N were higher (p<0.05) for pigs fed PSP diets than pigs fed NC diet and PSP 2.5 treatment was the highest among the treatments. On d 21, digestibility of N was significantly improved in PSP treatments compared with PC treatment (p<0.05). For Exp. 2, five Duroc${\times}$Yorkshire${\times}$Landrace barrows (8.74${\pm}$0.22 kg average initial BW) were surgically fitted with a simple T-cannulas approximately 15 cm prior to the ileo-cecal junction. The experimental designs were 5${\times}$5 latin squares with pigs and periods as blocking criteria. Dietary treatments were same as Exp.1. Generally, apparent ileal digestibilities of DM and N were higher for pigs fed PSP diets than pigs fed NC or PC diets (p<0.05) and PSP 5.0 and 2.5 treatments were the highest among the treatments, respectively. Apparent ileal digestibilities of the whole amino acids were increased in PSP treatments compared with NC treatment (Quadratic effect, p${\leq}$0.05). Also, histidine, lysine and threonine digestibilities in essential amino acids and alanine, asparatic acid and glycine digestibilities in non essential amino acids were significantly higher for pigs fed PSP diets than pigs fed PC diets (p${\leq}$0.05). In conclusion, feeding processed soy protein to weanling pigs increased growth performance, nutrient digestibility and apparent ileal digestibilities of DM, N and most amino acids.

Acupuncture on Siguan Points (LI4 and LR3) Restores Loperamide/Scopolamine-induced Intestinal Immotility in Mice

  • Shin Jang-Woo;Son Jin-Young;Yim Yun-Kyoung;Choi Sun Mi;Koo Sung-Tae;Son Chang-Gue
    • The Journal of Korean Medicine
    • /
    • v.27 no.1 s.65
    • /
    • pp.146-154
    • /
    • 2006
  • Objectives : Siguan points (LI4, LR3) have been most frequently applied for various diseases, especially different digestive disorders such as constipation, abdominal pain or various intestinal inflammatory diseases. The fact that gastrointestina movement is closely connected with physiologic functions or pathologic process of alimentary canal led us to ask the question if Siguan points affects on intestinal motility. Design: To investigate the effect of Siguan acupuncture on the intestinal movement in both physiologic and pathologic conditions, we divided the experimental animals into 12 groups. Six groups were pre-treated with loperamide (0.5 mg/kg, sc) or scoploamine (0.5 mg/kg, sc) to suppress the intestinal movement and another three groups were pretreated with carbachol (0.5 mg/kg, po) to activate it, whereas the rest three groups didn't receive any pretreatment to be kept in the physiological condition. After the administration with charcoal meal, mice were acupunctured bilaterally on sham point or Siguan points as the manner of tap-stimulation, with the exception of no acupuncture groups. Methods : Mice were scarified in twenty minutes after the administration of charcoal to measure the distance of charcoal passage from stomach-duodenal junction. The effect on intestinal movement was presented by calculating the relative distance where charcoal arrived to total length of small intestine. Results : In physiological state, charcoal meal passed around 53%, and there was no significant difference between Siguan points and sham points groups. On the other hand. Siguan points-sitimulation significantly ameliorated loperamide or scoplolamine-induced suppressed travel rate of 17.3 % and 18.6% in sham point into 26% and 26.3% respectively (p<0.05). In carbachol-induced accelerated condition, Siguan points-stimulation didn't affect intestinal motility comparing to sham point group passed about 97.6%. Conclusions : These results postulate that acupuncture at Siguan points have a therapeutic effect by restoring cholinergic activity on pathogenically suppressed intestinal peristalsis, but does not affect the gastrointestinal motility in the normal or accelerated condition.

  • PDF

INFLUENCE OF POST TYPES AND SIZES ON FRACTURE RESISTANCE IN THE IMMATURE TOOTH MODEL (미성숙 치아 모델에서 포스트의 종류와 크기가 치아의 파절 저항성에 미치는 영향에 관한 연구)

  • Kim, Jong-Hyun;Park, Sung-Ho;Park, Jeong-Won;Jung, Il-Young
    • Restorative Dentistry and Endodontics
    • /
    • v.35 no.4
    • /
    • pp.257-266
    • /
    • 2010
  • The purpose of this study was to determine the effect of post types and sizes on fracture resistance in immature tooth model with various restorative techniques. Bovine incisors were sectioned 8 mm above and 12 mm below the cementoenamel junction to simulate immature tooth model. To compare various post-and-core restorations, canals were restored with gutta-percha and resin core, or reinforced dentin wall with dual-cured resin composite, followed by placement of D.T. LIGHT-POST, ParaPost XT, and various sizes of EverStick Post individually. All of specimens were stored in the distilled water for 72 hours and underwent 6,000 thermal cycles. After simulation of periodontal ligament structure with polyether impression material, compressive load was applied at 45 degrees to the long axis of the specimen until fracture was occurred. Experimental groups reinforced with post and composite resin were shown significantly higher fracture strength than gutta-percha group without post placement (p < 0.05). Most specimens fractured limited to cervical third of roots. Post types did not influence on fracture resistance and fracture level significantly when cement space was filled with dual-cured resin composite. In addition, no statistically significant differences were seen between customized and standardized glass fiber posts, which cement spaces were filled with resin cement or composite resin individually. Therefore, root reinforcement procedures as above in immature teeth improved fracture resistance regardless of post types and sizes.

An Ultrastructural Study on the Effect of Exogenous $Ca^{2+}$ Stimulation to Ischemic Myocardium during Post-ischemic Reperfusion (재관류시 외인성 칼슘 자극이 허혈 심근에 미치는 영향에 대한 전자현미경적 연구)

  • Kim, Ho-Dirk;Chun, Sang-Bae;Rah, Bong-Jin
    • Applied Microscopy
    • /
    • v.21 no.1
    • /
    • pp.1-20
    • /
    • 1991
  • The effects of exogenous $Ca^{2+}$ stimulation on the post-ischemic myocardial cells were studied using isolated Langendorff-perfused guinea pig hearts. At the starting point of reperfusion, Tyrode solutions, each containing 2.0mM, 4.0mM and 8.0mM $CaCl_2$ respectively, were administered for 2 minutes apart by descending, ascending, or by combined sequences followed by standard Tyrode solution containing 1.0mM $CaCl_2$. The minutes of global ischemia produced reversible but moderate to severe degree of myocardial ultrastructrual changes including focal destruction of sarcolemma, loss of nuclear matrix, clumping and margination of chromatins, mitochondrial swelling, destruction of mitochondrial cristae, shortening of sarcomeres, focal loss of myofibrils, and separation of cell junctions. In spite of reperfusion, the ultrastructure was more severely damaged and irreversible changes such as intracellular fluid accumulation, contracted sarcomeres, mitochondrial destruction, disruption of sarcolemma, loss of nuclear matrix, and separation of cell junction were observed in a large number of cells. In contrast, Tyrode-perfused $Ca^{2+}$-stimulated myocardial cells showed relatively well preserved ultrastucture, except slight changes including focal mitochondrial swelling, widening of T-tubule, and widening of cell junctions, especially at fasciae adherentes. The post-ischemic $Ca^{2+}$-stimulated reperfused myocardial cells produced focal changes such as mitochondrial destruction, disintegration of sarcolemma, widening of T-tubule, and intracellular fluid accumulation with slight variation in degree of changes by the method of $Ca^{2+}$ administration sequence. However, in a large number of the myocardial cells, chromatins were redistributed relatively evenly in the nuclear matrix, mitochondrial cristae were tightly packed, and a considerable number of intramitochondrial granules and glycogen granules reap-pealed. These results indicate that exogenous $Ca^{2+}$ stimulation in the initial period of reperfusion may be beneficial to salvage or to reduce the post-ischemic myocardium from further deleterious changes, and that the beneficial effects may be derived from the reserves of the function of the intracellular $Ca^{2+}$ regulating organelles and/or from the responsiveness of contractile apparatus to $Ca^{2+}$ stimulation.

  • PDF

Development of head loss coefficient formula at surcharged four-way combining square manhole with variation of inlet flow (유입유량 변화를 고려한 과부하 4방향 사각형 합류맨홀에서의 손실계수 산정식 개발)

  • Jo, Jun Beom;Kim, Jung Soo;Yoon, Sei Eui
    • Journal of Korea Water Resources Association
    • /
    • v.50 no.12
    • /
    • pp.877-887
    • /
    • 2017
  • The energy losses due to surcharged flow at four-way combining manhole, which is mainly installed in the downstream of urban sewer system, is the main cause of inundation in urban area. Surcharged four-way combining manholes form various flow configuration such as straight through, T-type, and four-way manholes depending on variation of inflow discharge in inlet pipes. Therefore, it is necessary to analyze change of energy loss and estimate head loss coefficients at surcharged four-way combining manhole with variation of inflow discharge ratio. The hydraulic experimental apparatus which can change inflow ratios were installed to analyze the flow characteristics at four-way combining manhole. In this study, to calculate the head loss coefficient according to change of the inflow discharge ratios at the surcharged four-way combining square manhole, the discharge conditions of 40 cases which the inflow ratios of each inlet pipe were changed by 10% interval was selected. The head loss coefficient at surcharged square manhole showed the lowest value of 0.40 at the straight manhole and the highest value of 1.58 at the $90^{\circ}$ junction manhole. In the combining manholes (T-type and four-way), the head loss coefficients were calculated more higher as the lateral flow rate was biased. The contour map of head loss coefficient range was constructed by using the estimated head loss coefficients and the empirical formula of head loss coefficients was derived to consider the variation of inflow discharge ratios at the surcharged square manhole. The empirical formula could be applied to the design and assessment of the urban drainage system.

Full-Wave Analysis, Design and Fabrication of Duplexer by Mode Matching Method for Ka-Band Transponder (모드정합법에 의한 Ka-밴드 위성중계기용 듀플렉서의 Full-Wave 분석 및 설계${\cdot}$제작에 관한 연구)

  • Lee, Yong-Min;Ra, Keuk-Hwan
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.36D no.8
    • /
    • pp.36-44
    • /
    • 1999
  • This paper presents the design and fabrication of the duplexer for a Ka-band satellite transponder which is analyzed transmission characteristics by calculating the generalized scattering matrix using mode matching method. It is composed of 2 bandpass filters, coupled with H-plane T-junction having symmetrical inductive iris and E-plane metal insert structures. Compared with the size and weight of the Rx and Tx filter loaded with a transponders respectively, those of the duplexer can be effectively reduced. In a high power transmission, the variation of the filter characteristics is minimized by the scheme that irises are extended to the exterior of H-plane of the waveguide. This scheme needs no extra heat sinks for dissipating high power. The duplexer is designed to improve the simplification, durability and reliability by eliminating tuning screws, which have been used to compensate for the characteristics of fabricated filters. The bandpass filters of the duplexer show the insertion loss of less than 1.2 dB and the return loss in excess of 15 dB. The isolations of more than 65 dB have been achieved between Rx and Tx filter.

  • PDF

A STUDY ON THE EFFECT OF DENTIN ADHESIVE TO FLUORIDE RELEASE OF COMPOMER (상아질 결합제가 컴포머의 불소유리에 미치는 영향에 관한 연구)

  • Yoon, Yeo-Sang;Kim, Jong-Soo;Kwon, Soon-Won;Kim, Yong-Kee
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.28 no.2
    • /
    • pp.228-237
    • /
    • 2001
  • It is well known that glass-ionomer cement and compomer can release fluoride which can inhibit the progression of dental caries. The purposes of this study were to evaluate whether the fluoride from fluoride-containing filling materials can penetrate the dentin bonding adhesive and the dentin bonding adhesive can increase the bond strength of resin-modified glass ionomer. The amount of fluoride release from resin-modified glass ionomer and compomer was measured during 28 days of period and statistically analyzed by t-test. The bond strength of each material with/without dentin bonding adhesive was measured and also statistically analyzed by t-test. The distribution of fluoride from each material into the tooth was explored by electron probe microanalysis system(EPMA). The experimental teeth used were second primary molars about to exfoliate. The amount of fluoride release from each material was diminished by dentin bonding adhesive during 28 days(p<0.05) and the bond strength was not increased by dentin adhesive in resin-modified glass ionomer. The bond strength of group VI was not detectable. The distribution of fluoride from each material into teeth was according to dentino-enamel junction and dispersed into pulp from pulpal floor. The widest distribution was shown in resin-modified glass ionomer cement filled without the application of dentin bonding adhesive.

  • PDF

Characteristics of Magnetic Tunnel Junctions Comprising Ferromagnetic Amorphous NiFeSiB Layers (강자성 비정질 NiFeSiB 자유층을 갖는 자기터널접합의 스위칭 특성)

  • Hwang, J.Y.;Rhee, S.R.
    • Journal of the Korean Magnetics Society
    • /
    • v.16 no.6
    • /
    • pp.279-282
    • /
    • 2006
  • Magnetic tunnel junctions (MTJs), which consisted of amorphous ferromagnetic NiFeSiB free layers, were investigated. The NiFeSiB layers were used to substitute for the traditionally used CoFe and/or NiFe layers with the emphasis being given to obtaining an understanding of the effect of the amorphous free layer on the switching characteristics of the MTJs. $Ni_{16}Fe_{62}Si_{8}B_{14}$ has a lower saturation magnetization ($M_{s}:\;800\;emu/cm^{3}$) than $Co_{90}Fe_{10}$ and a higher anisotropy constant ($K_{u}:\;2700\;erg/cm^{3}$) than $Ni_{80}Fe_{20}$. The $Si/SiO_{2}/Ta$ 45/Ru 9.5/IrMn 10/CoFe $7/AlO_{x}/CoFeSiB\;(t)/Ru\;60\;(in\;nanometers)$structure was found to be beneficial for the switching characteristics of the MTJ, leading to a reduction in the coercivity ($H_{c}$) and an increase in the sensitivity resulted from its lower saturation magnetization and higher uniaxial anisotropy. Furthermore, by inserting a very thin CoFe layer at the tunnel barrier/NiFeSiB interface, the TMR ratio and switching squareness were improved more with the increase of NiFeSiB layer thickness up to 11 nm.

Analysis of Minimum Logistics Cost in SMEs using Korean-type CIPs Payment System (한국형 CIPs 결제 시스템을 이용한 중소기업의 최소 물류비용 분석)

  • Kim, Ilgoun;Jeong, Jongpil
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.21 no.1
    • /
    • pp.7-18
    • /
    • 2021
  • Recently, various connected industrial parks (CIPs) architectures using new technologies such as cloud computing, CPS, big data, fifth-generation mobile communication 5G, IIoT, VR-AR, and ventilation transportation AI algorithms have been proposed in Korea. Korea's small and medium-sized enterprises do not have the upper hand in technological competitiveness than overseas advanced countries such as the United States, Europe and Japan. For this reason, Korea's small and medium-sized enterprises have to invest a lot of money in technology research and development. As a latecomer, Korean SMEs need to improve their profitability in order to find sustainable growth potential. Financially, it is most efficient for small and medium-sized Korean companies to cut costs to increase their profitability. This paper made profitability improvement by reducing costs for small and medium-sized enterprises located in CIPs in Korea a major task. VJP (Vehicle Action Program) was noted as a way to reduce costs for small and medium-sized enterprises located in CIPs in Korea. The method of achieving minimum logistics costs for small businesses through the Korean CIPs payment system was analyzed. The details of the new Korean CIPs payment system were largely divided into four types: "Business", "Data", "Technique", and "Finance". Cost Benefit Analysis (CBA) was used as a performance analysis method for CIPs payment systems.

C7 Fracture as a Complication of C7 Dome-Like Laminectomy : Impact on Clinical and Radiological Outcomes and Evaluation of the Risk Factors

  • Yang, Seung Heon;Kim, Chi Heon;Lee, Chang Hyun;Ko, Young San;Won, Youngil;Chung, Chun Kee
    • Journal of Korean Neurosurgical Society
    • /
    • v.64 no.4
    • /
    • pp.575-584
    • /
    • 2021
  • Objective : Cervical expansive laminoplasty is an effective surgical method to address multilevel cervical spinal stenosis. During surgery, the spinous processes of C2 and C7 are usually preserved to keep the insertion points of the cervical musculature and nuchal ligament intact. In this regard, dome-like laminectomy (undercutting of C7 lamina) instead of laminoplasty is performed on C7 in selected cases. However, resection of the lamina can weaken the C7 lamina, and stress fractures may occur, but this complication has not been characterized in the literature. The objective of the present study was to investigate the incidence and risk factors for C7 laminar fracture after C7 dome-like laminectomy and its impact on clinical and radiological outcomes. Methods : Patients who underwent cervical open-door laminoplasty combined with C7 dome-like laminectomy (n=123) were classified according to the presence of C7 laminar fracture. Clinical parameters (neck/arm pain score and neck disability index) and radiologic parameters (C2-7 angle, C2-7 sagittal vertical axis, and C7-T1 angle) were compared between the groups preoperatively and at postoperatively at 3, 6, 12, and 24 months. Risk factors for complications were evaluated, and a formula estimating C7 fracture risk was suggested. Results : C7 lamina fracture occurred in 32/123 (26%) patients and occurred at the bilateral isthmus in 29 patients and at the spinolaminar junction in three patients. All fractures appeared on X-ray within 3 months postoperatively, but patients did not present any neurological deterioration. The fracture spontaneously healed in 27/32 (84%) patients at 1 year and in 29/32 (91%) at 2 years. During follow-up, clinical outcomes were not significantly different between the groups. However, patients with C7 fractures showed a more lordotic C2-7 angle and kyphotic C7-T1 angle than patients without C7 fractures. C7 fracture was significantly associated with the extent of bone removal. By incorporating significant factors, the probability of C7 laminar fracture could be assessed with the formula 'Risk score = 1.08 × depth (%) + 1.03 × length (%, of the posterior height of C7 vertebral body)', and a cut-off value of 167.9% demonstrated a sensitivity of 90.3% and a specificity of 65.1% (area under the curve, 0.81). Conclusion : C7 laminar fracture can occur after C7 dome-like laminectomy when a substantial amount of lamina is resected. Although C7 fractures may not cause deleterious clinical outcomes, they can lead to an unharmonized cervical curvature. The chance of C7 fracture should be discussed in the shared decision-making process.