• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.1
• /
• pp.8-13
• /
• 1997

An electric field due to point dipole within conductor-backed thin dielectric layer above the earth is calculated by using saddle point method When the dielectric layer is thin enough to support a cutoff mdoe, we show that the field may be approximated by sum of contributions of branch points of TE mode and poles of tM mode and that the branch points and poles contributions are interpreted as an evanescent lateral waves and leaky waves, respectively.

• Ocean and Polar Research
• /
• v.24 no.4
• /
• pp.359-365
• /
• 2002

The qualitative and quantitative composition of the phytoplankton of the coastal waters off Vladivostok during the period 1991-1994 was studied. The following trends in the phytoplankton composition with decreasing distance from the source of eutrophication were revealed: 1) total density and bio-mass increased; 2) the density of the diatom Skeletonema costatum, which reflects a decrease in the Shannon-Weaver species diversity index during the summer microalgal bloom, increased significantly; and 3) the density of the non-diatom component of the phytoplankton increased.

• Structural Engineering and Mechanics
• /
• v.61 no.5
• /
• pp.657-661
• /
• 2017

In this paper, it has been tried to propose a new semi analytical approach for solving nonlinear vibration of conservative systems. Hamiltonian approach is presented and applied to high nonlinear vibration systems. Hamiltonian approach leads us to high accurate solution using only one iteration. The method doesn't need any small perturbation and sufficiently accurate to both linear and nonlinear problems in engineering. The results are compared with numerical solution using Runge-Kutta-algorithm. The procedure of numerical solution are presented in detail. Hamiltonian approach could be simply apply to other powerfully non-natural oscillations and it could be found widely feasible in engineering and science.

• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.167-172
• /
• 2006

Recently, wire-EDM became a necessity for many engineering applications, particularly in the dies making. No-Core cut process is helpful for operations in which falling slug can jam the machine or wire. In this paper a proposed CAM system (called NCPP) is introduced, to overcome the limitations of the existing CAM systems in the machining of No-Core cut. The proposed CAM system (NCPP) provides pocketing of No-core cut and optimal selection of the position of starting hole (wire threading point), to minimize toolpath length. It was written for data exchange between CAD-CAM-CNC machines. This data model will become part of the ISO (Data model for Computerized Numerical Controllers) international standard. The NCPP system has been implemented in Visual C++. Many examples are used to illustrate NCPP system. The results show that, NCPP saves the machining time by significant value. This value depends on the shape and complexity of the workpiece that is being cut.

• Smart Structures and Systems
• /
• v.15 no.5
• /
• pp.1311-1327
• /
• 2015

In this paper, we have applied a new class of approximate analytical methods called Variational Approach (VA) for high nonlinear vibration equations. Three examples have been introduced and discussed. The effects of important parameters on the response of the problems have been considered. Runge-Kutta's algorithm has been used to prepare numerical solutions. The results of variational approach are compared with energy balance method and numerical and exact solutions. It has been established that the method is an easy mathematical tool for solving conservative nonlinear problems. The method doesn't need small perturbation and with only one iteration achieve us to a high accurate solution.

• Proceedings of the KACD Conference
• /
• 2001.05a
• /
• pp.252-252
• /
• 2001

;The Varicella zoster virus can cause two infectious diseases. The primary infection of this virus leads to Chicken pox and it goes into a latent period until it reveals itself again. When secondarily shown. it is called Herpes Zoster. Herpes Zoster can usually be seen between T-3 and L-2 of immunodepressant patients but in 13%. it is seen in the trigeminal nerve branch. During the predrominal stage. burning sensation, itching. and sharp pain can be experienced unilaterally where the nerve branch is distributed. Patients can also express tooth pain in this stage. After 2-4 days the acute stage begins with its characteristic unilateral macule showing vesicle formation. In this stage fever and fatigue can be experienced. Continuous pain even after the acute stage is called postherpetic neuralgia; deep pain and burning sensation can be expressed by the patient. The sequelae of this disease consists of rare osteomyelitis. necrosis of the jaws. or loss of teeth.teeth.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.63
• /
• pp.65-77
• /
• 2001

A more technical perspective is needed in estimating the effect of the Manufacturing Process for improving the Productivity, there are many statistical evaluation methods, convenience sampling, frequencies, histogram, QC seven tools, control chart etc. It is more important for the companies to use six sigma to reduce defective and improve the process control than the technical definition as a disciplined quantitative approach for improvement of process control and a new way of quality innovation. Process network analysis is a technique which has the potentiality for a wide use to improve the manufacturing process which other techniques can't be used to analyze effectively. It has some problems to analyze the process with feedback loops. The branch probabilities during quality inspections depend upon the number of times the product has been rejected. This paper presents how to improve the manufacturing process by statistical process control using branch probabilities, Moment Generating Function(MGF) and Sensitivity Equation.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.5
• /
• pp.404-410
• /
• 2016

PURPOSE. Considering the importance of retention in the success and long-term clinical service of fixed partial dentures (FPDs) as well as the existing controversy regarding the effect of GLUMA desensitizer on the retention of full metal crowns cemented with RelyX U200 self-adhesive cement, this study aimed to assess the effect of GLUMA desensitizer on the retention of full metal crowns cemented using RelyX U200. MATERIALS AND METHODS. In this experimental study, 20 sound human premolars were prepared; a 0.5 mm chamfer finish line was prepared above the cementoenamel junction. The teeth were randomly assigned to two groups: a desensitizer group (n = 10, treated with GLUMA desensitizer) and a control (n = 10, no surface treatment). Full metal crowns were fabricated of base metal alloy and had a ring. All crowns were cemented with RelyX U200 and subjected to retention test by using a universal testing machine. The data were analyzed using SPSS version 20 and independent t-test. RESULTS. The mean tensile bond strength was significantly higher in the GLUMA desensitizer group ($230.63{\pm}63.8N$) compared to the control group ($164.45{\pm}39.3N$) ($P{\leq}.012$). CONCLUSION. GLUMA desensitizer increases the tensile bond strength of RelyX U200 self-adhesive cement to dentin.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.2
• /
• pp.162-168
• /
• 2010

This study attempted to clarify the difference in eggshell pigmentation between blue-shelled ducks (BSD) and whiteshelled ducks (WSD). The eggshell pigmentation deposition process is discussed. Ultraviolet spectro-photometer and HPLC were used to determine the biliverdin concentration in the shell gland, uterus liquid and eggshell at 6, 12, 18, 20, 23.5 h post-oviposition. The biliverdin concentration in the eggshell and uterus fluid showed significant differences between BSD and WSD, but not in the shell gland. The heme oxygenase activity in the shell gland of both kinds of ducks remained mostly constant during the ovulatory cycle with no variation. The assay of exogenous biliverdin injection into the shell gland antrum in the WSD indicated that exogenous biliverdin could be deposited continuously into the eggshell until the source was exhausted. A layer-by-layer dissolution assay was used to examine the eggshell pigment deposition process. The biliverdin concentration in the first to sixth layers of the eggshell in the BSD was significantly higher than that in the white-shelled counterpart. The blue pigment concentration increased persistently from the 6th layer to the $1^{st}$ layer. The BSD eggshells did not accumulate a large quantity of biliverdin in the most external layer. They tended to increase the deposition layer by layer. Our results demonstrated that different BSD and WSD eggshell colors were influenced by the amount of biliverdin in the uterus fluid and not determined by the amount of biliverdin in the shell gland. This implies the existence of a mechanism that controls biliverdin transportation from the shell gland into the uterus fluid, thereby playing a key role in regulating duck eggshell color.

• Journal of the Korean Dietetic Association
• /
• v.13 no.3
• /
• pp.277-294
• /
• 2007

The purposes of this study were to a) examine using status, b) measure the service quality attributes, c) analyze IPA and customer satisfaction, d) develop the LSM(Local Store Marketing) by location of K theme restaurant such as residential type(A), complex type(B) and downtown type(C). The questionnaires were handed out to 346 of 450(usage rate 76.9%). The statistical data analysis was completed using SPSS(ver 12.0) for descriptive analysis, $X^2$, t-test, ANOVA, reliability analysis, factor analysis, multiple linear regression. From an analysis on service quality attributes, most importance of service quality attributes was more highly perceived than performance of those, except for 'attractive exterior', 'variety of kid's menu', 'convenient facilities for kid' and perceived importance and performance were also significantly different by location of branch restaurant. The attributes to be improved were 'convenience of restaurant's parking lot', 'food tast', 'speedy service' and 'service competency' as branch A(residential type) restaurant, 'convenience of the restaurant location' as branch B(complex type) restaurant and 'convenience of the restaurant location' and 'speedy service' as branch C(downtown type) through IPA analysis. The Overall customer satisfaction was 3.74 and service quality factors had significant effect on overall customer satisfaction. Location of restaurant, which gives a great effect on its operation and marketing, has a important correlation with success or failure of restaurant business enterprises. Therefore, marketing strategy by restaurant location should be developed.