• Journal of Korean Society of Steel Construction
• /
• v.26 no.4
• /
• pp.311-322
• /
• 2014

Concrete filled tubular structure should be installed diaphragms for moment connection. However internal and through diaphragm should be special welded when connected to column tube. The other hand, that has become increase of stress concentration and extend of construction error. Therefore, In this study the seismic performance of beam to column connections with External Diaphragms and implement cycle loading experiment. we had evaluated seismic performance with mentioned experiment which is concrete filled or not, variable shapes, to be welded or not of diaphragm. Also, formula of strength of external diaphragm was analyzed and looked into adequacy with regard to formula of tension strength.

• Food Science of Animal Resources
• /
• v.24 no.4
• /
• pp.349-354
• /
• 2004

Stress-susceptible pigs have been known as the porcine stress syndrome (PSS), swine PSS, also known as malignant hyperthermia (MH), is characterized as sudden death and production of poor meat quality such as PSE (pale, soft and exudative) meat after slaughtering. PSS and PSE meat cause major economic losses in the pig industry. A point mutation in the gene coding for the ryanodine receptor (RYR1) in porcine skeletal muscle, also known calcium (Ca$^{2+}$) release channel, has been associated with swine PSS and halothane sensitivity. We used the PCR-RFLP(restriction fragment length polymorphism) and PCR-SSCP (single strand conformation polymorphism) methods to detect the PSS gene mutation (C1843T) in the RYR1 gene and to estimate genotype frequencies of PSS gene in Korean pig breed populations. In PCR-RFLP and SSCP analyses, three genotypes of homozygous normal (N/M), heterozygous carrier (N/n) and homozygous recessive mutant (n/n) were detected using agarose or polyacrylamide gel electrophoresis, respectively. The proportions of normal, carrier and PSS pigs were 57.1, 35.7 and 7.1％ for Landrace, 82.5, 15.8 and 1.7％ far L. Yorkshire, 95.2, 4.8 and 0.0％ for Duroc and 72.0, 22.7 and 5.3％ for Crossbreed. Consequently, DNA-based diagnosis for the identification of stress-susceptible pigs of PSS and pigs producing PSE meat is a powerful technique. Especially, PCR-SSCP method may be useful as a rapid, sensitive and inexpensive test for the large-scale screening of PSS genotypes and pigs with PSE meat in the pork industry.y.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.395-399
• /
• 2017

The LPI fuel filter housings used in automobiles were made from conventional die castings but have recently been developed by cold forging to improve the weight and durability. On the other hand, a sink may develop at the core of the forged product due to the resulting T-shape, which not only reduces the aesthetics, but also increases the post-processing cost of the product. Therefore, this research focused on methods to predict and mitigate sink development and progression during the T-shape forging process. Finite element analysis of the forging process was first performed to determine the optimal initial workpiece devoid of burrs and underfills. An accurate sink prediction was then obtained via metal flow analysis, which was a result of the finite element simulation. Through finite element analysis, it was confirmed that sink development is a product of the differences in nodal velocities arising from the T-shaped forging process. Consequently, a pad was inserted beneath the sink to minimize these velocity differences. The results yielded significant improvement with regard to the sink defect. This method was practically applied to an industrial site to validate the sink improvement.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.3
• /
• pp.130-133
• /
• 2006

This study was conducted to select Codonopsis lanceolata seed's new pelleting particulate materials and adhesives. Different adhesives (Polyvinyl alcohol (PVA), Carboxymethyl cellulose (CMC), Polyvinyl pyrrolidone (PVP), Xanthan gum (XG), Arabic gum (AG)) and particulate materials (Illite, Diatomite, Pyrophyllite + Illite + Diatomite (PID), Pyrophyllite + Illite + Talc (PIT), Bentonite + Talc (BT)) were tested for seed pelleting. PID for Codonopsis lanceolata seed pelleting appeared to be the best particulate material. Among the pelleting adhesives, PVP was the best adhesive for seed pelleting, and the optimum concentration for germination of pelleting seed was 1 %. Germination rate of the pelleted seeds treated with PID particulate material and PVP adhesive was higher (86.8%) than those of raw seeds (85.5%). $T_{50}$ and MDG of pelleted Codonopsis lanceolata seed required five and eight days at soil moisture content of 50%, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.2
• /
• pp.89-96
• /
• 2022

This paper suggests heuristic algorithm for single-model cross-over assembly line balancing problem that is a kind of NP-hard problem. The assembly line balance problem is mainly applied with metaheuristic methods, and no algorithm has been proposed to find the exact solution of polynomial time, making it very difficult to apply in practice. The proposed bi-directional clustering algorithm computes the minimum number of worker m^* = ⌈W/c⌉ and goal cycle time c^* = ⌈W/m^*⌉ from the given total assembling time W and cycle time c. Then we assign each workstation i=1,2,…,m^* to T_i=c^* ±α≤ c using bi-directional clustering method. For 7 experimental data, this bi-directional clustering algorithm same performance as other methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.296-301
• /
• 2020

Three types of traffic signal systems are two-color signal systems that flash red and green and are mainly used on crosswalks, next, three-color equalization systems mainly used at T-shaped intersections with red and yellow lights and a green arrow, and third, four-color intersections that generally have red, yellow and green colored lights and a green arrow. In what is known as the "dilemma zone" area, a driver collects information that influences his/her decision whether to stop, speed, tail, interrupt, or violate a traffic light, depending on the intersection width, vehicle speed, cognitive response time and reference yellow signal time. This study examined the impact of changes in the length of the dilemma zone areas based on changes in yellow signal times, the speed of the intersection passages, and signal lamps. Downward adjustments of 50km/h and 60km/h affected yellow signal time. The yellow signal time increased by 0.1 to 2.3[s] due to this effect and the dilemma zone area increased by 1.22 to 26[m]. The driver of the dilemma zone could quickly decide to reduce the time remaining of the straight (3color, 4color) green signal to reduce the potential of a traffic accident at the intersection traffic. Safe entry of red (LED palm) and left-turn signals for entering flashed at the intersection and operated at midnight.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3140-3145
• /
• 2012

In this paper, a design method for a compact slot antenna fed by a coplanar waveguide (CPW) is studied. A T-shaped tuning stub is inserted inside a narrow rectangular slot and the slot is impedance matched to the CPW feedline by adjusting the width, length, and position of the stub. The resonance frequency is adjustable by the slot length and the antenna size can be reduced by bending the slot. The resonance frequency and impedance matching property of the compact slot antenna are similar to those of the half-wavelength slot antenna, which enables one to design compact antenna of this type with ease. A compact slot antenna for 2.45-GHz ISM band is designed, fabricated on an FR4 substrate (dielectric constant of 4.4 and thickness of 0.8 mm), and experimentally tested. The measured results agree well with the simulations, which confirms the validity of this study. The fabricated compact slot antenna shows an impedance bandwidth of 200 MHz(2.32-2.52 GHz) for a VSWR < 2, which is suitable for 2.45-GHz ISM band (2.4-2.48 GHz). The measured radiation patterns show ${\infty}$-shaped directional pattern in the E-plane and nearly omni-directional pattern in the H-plane with a peak gain of 2.0 dBi, which are similar to those of a monopole antenna. The proposed antenna is expected to be suitable for the applications as antennas for WLAN, RFID, and mobile handset.

• Journal of Technology Innovation
• /
• v.20 no.1
• /
• pp.115-140
• /
• 2012

From a point of knowledge based view, IUI(Industry-University-Institute) R&D collaboration is recognized as an important way to acquire lacking technology and knowledge. In this study, we investigated firm performance of IUI R&D collaboration on national R&D project. That is, we identified whether a collaborative research really affects firm performance, and whether firm performance is differed by types of collaboration. To test our hypotheses, we selected 250 Korean SMEs(Small and Medium Enterprises) which were funded from government R&D for 2006-2009, and we verified relations between the ratio and/or types of R&D collaboration and firm performance. Firm performance was measured by number of patent applied and ROA(Return on Assets) after completion of the project (in year t+1). Findings showed that the relationship between the ratio of R&D collaboration and technological performance was inverted U-shape. Among types of R&D collaboration, though inter-industry collaborative research was negatively related to technological performance, IUI collaborative research was positively related to technological performance. However, the ratio and types of R&D collaboration had no relation to economic performance. The results of this study will contribute to the strategy of SMEs as well as the policy of a government with regard to IUI R&D collaboration.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.3
• /
• pp.213-219
• /
• 1995

The author carried out an experiment to find out the response of Black porgy, Acanthopagrus schlegelii [Bleeker] to the color lights. The experimental tank ($360L{\times}50W{\times}55H$cm) was set up in a dark room. Six longitudinal sections with 60cm intervals are marked in the tank to observe the location of the fish. Water depth in the tank was kept 50cm level. Light bulbs of 20 W at the both ends of the tank projected the light horizontally into the tank. Two different colored filters were selected from four colors of red, blue, yellow, and white, and they were placed in front of the light bulbs to make different colors of light. Light intensity was controlled by use of auxiliary filters intercepted between the bulb and the filter. The fishes were acclimatized in the dark for 50 minutes before they were employed in the experiment. Upon turning on the light, the number of fish in each section was counted 40 times in 30 second intervals, and the mean of the number of fish in each section was given as the gathering rate of the fish. The colors favourited by the fish was found in order of blue, yellow, white and red in the day-time and blue, red, yellow and white at night. The difference of the average distribution on two different colors of light was 7.18%(0.35-19.55%), and the difference in the daytime(8.20%) was larger than at night (6.15%). The gathering rate of fish on illumination period didn't show the regular trend of increase and decrease, and was fluctuated with instability. The difference of the gathering rate on two different colors of light wasn't distinct, and the difference in the daytime was larger than at night.

• Korean Journal of Poultry Science
• /
• v.45 no.4
• /
• pp.253-260
• /
• 2018

The hepatocyte nuclear factor 4 alpha ($HNF4{\alpha}$) gene is related to lipid transport, including abdominal fat and growth, in chickens. Interestingly, the A543G SNP within the $HNF4{\alpha}$ gene has previously been reported to be associated with body weight in both broilers and Korean native chickens (KNCs). However, its exact position within the HNF4 is not yet reported. This study aimed to identify the position of the A543G SNP and to identify additional SNPs that can be used as genetic markers in KNCs. A total of 128 KNCs were used for the sequencing and analysis of these genetic associations. As a result, A543G SNP was located in intron 4 of the $HNF4{\alpha}$ gene; it is reported as rs731246957 in the NCBI database. Fourteen SNPs were detected in the sequenced portion of the $HNF4{\alpha}$ gene; three of these, rs731246957, rs736159604 and new SNP, intron 6 (249), were significantly related with growth in the chickens. In this study, the TT genotype of rs731246957, previously reported as A543G SNP, the GG genotype of rs736159604 and GT of new SNP have are highly associated with body weight from birth to 40 weeks of age in KNCs (P<0.01). These results suggest that rs736159604, rs731246957 and intron 6 (249) SNPs within the $HNF4{\alpha}$ gene could function as growth-related markers in the selective breeding of KNCs.