• Journal of the Korea Concrete Institute
• /
• v.22 no.4
• /
• pp.575-583
• /
• 2010

This research investigated the influence of the number of twist on single fiber pullout behavior of Twisted steel (T-) fiber and tensile behavior of high performance cementitious composites reinforced with the (T-) fibers (HPFRCC). Micromechanical pullout model for T- fibers has been applied to analytically investigate the influence of various fiber parameters including the number of twist on single fiber pullout behavior; and, to optimize the number of twist to generate larger pullout energy during fiber pullout without fiber breakage. In addition, an experimental program including single fiber pullout and tensile tests has been performed to investigate the influence of twist ratio experimentally. Two types of T- fiber with different twisted ratios, T(L)- fiber (6ribs/30 mm) and T(H)- fiber (18ribs/30 mm), were tested. T(L)- fiber produced higher equivalent bond strength (larger pullout energy) although T(H)- fiber produced higher pullout stress during pullout since T(H)- fiber showed fiber breakage during pullout. Tensile test results confirmed that T(L)- fiber in high strength mortar generates better tensile performance of HPFRCC, e.g., load carrying capacity, strain capacity and multiple micro-cracking behavior.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.1
• /
• pp.123-131
• /
• 2012

The objective of the present study was to evaluate the potential antidiabetic and antioxidant effect of the ethanol extract from Chrysanthemum cornarium L. var. spatiosum(CSE) against alloxan-induced oxidative stress in pancreatic ${\beta}$-cells, HIT-T15. In this study, the antidiabetic effect of CSE was examined using the 3-(4,5-dimethylthiazolyl-2)-2,5-diphenyltetrazoliu bromide(MTT) cell proliferation assay, lactate dehydrogenase(LDH) release assay, $NAD^+$/NADH ratio and insulin secretion. To further investigate whether CSE is involved in the antioxidant activity of alloxan-damaged HIT-T15 cells, its antioxidant effect against alloxan-induced oxidative stress was measured in HIT-T15 cells by determining the levels of antioxidant enzymes including superoxide dismutase(SOD), glutathione S-transferase(GST), glutathione reductase(GR) and glutathione peroxidase(GPx). The results of this analysis showed that alloxan significantly decreased cell viability, increased LDH leakage, and lowered $NAD^+$/NADH ratio and insulin secretion in HIT-T15 cells. However, CSE significantly increased the viability of alloxan-treated cells and lowered LDH leakage. The intracellular NAD+/NADH ratio and insulin secretion were also significantly increased by 1.7-fold and 1.3-fold, respectively, after treatment with 100 ${\mu}g/m{\ell}$ CSE. The HIT-T15 cells treated with alloxan showed significant decreases in the activities of antioxidant enzymes, while CSE significantly elevated the levels of antioxidant enzymes. These findings suggest that CSE could have a protective effect against cytotoxicity and dysfunction of pancreatic cells in the presence of alloxan-induced oxidative stress.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.3
• /
• pp.454-462
• /
• 1998

Mechanisms and conditions for rounding of AUC particles were examined during AUC precipitation. Rounding of AUC particle was possible only by external circulation using pump, not by internal circulation using agitator. The rate of AUC rounding $(dn_p/dt)$ was proporational to operation conditions such as magma density $(M_t:g-U/{\iota}l)$, turn over ratio $(T_o)$ and impeller tip velocity of pump (U); $ dn_p/dt{\propto}M_t{\cdot}T_o{\cdot}U^2$. The validity of this relationship was qualitatively confirmed by comparing the expermental results. Two rounding mechanisms were suggested. One is crack formation mechanism and the other etch-pit formation mechanism on the surface of AUC particle. It was found that the crack formation is more dominant at the initial stage and the etch-pit formation at the final stage of the AUC precipitation.

• Journal of Environmental Health Sciences
• /
• v.37 no.1
• /
• pp.64-72
• /
• 2011

This study was performed to assess the removal efficiency on nitrogen, phosphorus and organic carbon in wastewater by spatial separation and internal recycling in a modified oxidation ditch process (modified OD). The performances of the modified OD were evaluated via laboratory-scale experiments. The process was operated at hydraulic retention times of 6-48 hours and solid retention times of 17-38 days. We found that organic carbon removal efficiency increased after the modified OD operation period. T-N removal efficiency remained stable; average T-N concentration of effluent was 8.02 mg/l after modified OD operation. In contrast, T-P concentration of effluent was over 1 mg/l. Nitrogen and phosphorus removal efficiency of modified OD at HRT 12 hr were 83.1% and 74.1%, respectively. Also, maximum efficiency was found at SRTs from 20 to 30 days. T-N removal efficiency was 83.1% at a C/N ratio from 3.0 to 3.5. However, T-N removal efficiency decreased at C/N ratios over 3.5. Also, T-P removal efficiency increased with HRT at C/P ratios in the same condition. Maximum efficiency was 74.1% at a C/P ratio from 25 to 28. T-N removal efficiency was 79.2% and T-P removal efficiency was 65.3% after M4 mode operation (added to the internal recycle line connected to the anoxic reactor). The modified OD with spatial separation and internal recycling developed in this study is, therefore, believed to be an improvement for solving problems in the nutrient removal technologies.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.2
• /
• pp.115-123
• /
• 2016

In this study, the effect of energy and protein ratio on the nutrient availability and body weight gain was determined to find the proper nutrient level for the stage of replacement dairy heifers before fertilization at approximately 12~24 months old after birth. Dry matter intake showed that the TDN/CP rate of T1 (5.0:1), T2 (4.5:1) and T3 (4.0:1) resulted in similar values. Among feces, the ash content of T1 was 11.07%, which was significantly (p < 0.05) higher than that of T3 (9.69%). It was also significantly (p < 0.05) higher than that of T2 (10.32%). When the TDN/CP rate was increased, the ash content in the feces was also increased. Regardless of the initial weight, weight gain was increased significantly as the CP rate in the feed was increased on the $30^{th}$ day. On the $60^{th}$ day, T2 showed the highest rate of gain (p < 0.05). As the TDN rate was decreased or the protein rate was increased, weight gain was significantly (p < 0.05) increased. Regarding GPT level in the blood after finishing the test, T1 and T3 (112.6, 88.3 u/l) showed significantly (p < 0.05) higher value than T2 (50.9 u/l). For phosphorus level, T1 (46.3 mg/dl) showed significantly (p < 0.05) higher value than other treatments. For HDL cholesterol level, T2 (145.2 mg/dl) had significantly (p < 0.05) higher level than T1 (121.0 mg/dl) or T3 (132.3 mg/dl). For triglyceride levels, T3 (40.6 mg/dl) had significantly (p < 0.05) higher value than T1 (20.7 mg/dl) and T2 (29.0 mg/dl). For other blood parameters including BUN concentration, there were no significant (p > 0.05) difference among treatments. As a result, although feed intake and weight gain with TDN/CP rate of 4:1 showed best results, considering the excess body fat accumulation possibilities or blood metabolism, it seems 4.5:1 ratio is most appropriate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.5
• /
• pp.683-689
• /
• 2017

Objective: The experiments were carried out to measure the effect of multivitamin, acidifier and Azolla on growth performance, profitability and lipid profiles of blood of broiler chickens to produce safe and cost effective broilers. Methods: In experiment 1, 240 day-old Cobb-500 broiler chicks were fed diets; $D_1$ (control), $D_2$ ($D_1$ with 1 mL multivitamin/liter water), $D_3$ ($D_1$ with 1 mL acidifier/liter water), $D_4$ ($D_1$ with 1 mL multivitamin and 2 mL acidifier/liter water) having 3 replications in each, and 20 chicks/replication. In experiment 2, 150 day-old Cobb-500 broiler chicks were fed diets; $T_1$ (control), $T_2$ (5% Azolla in the diet), $T_3$ (7% Azolla in the diet) and $T_4$ ($T_1$ with 1 mL multivitamin and 1 mL acidifier/liter water) having 3 replications in each, and 20 chicks/replication in control, and 10 chicks/replication in the remaining dietary treatment groups for 35 days. Results: In experiment 1, the highest live weight was observed in $D_4$ (p<0.05), however, feed intake was statistically similar between diets (p>0.05). The lowest feed conversion ratio (FCR) (p<0.001) and mortality (p<0.05) were observed in $D_2$ followed by $D_4$, $D_1$, and $D_3$, respectively. There were no significant differences between diets for feed cost and net profit (p>0.05). However, evidently but not significantly, the highest net profit was obtained in $D_2$ followed by $D_4$, $D_1$, and $D_3$, respectively. In experiment 2, the highest live weight (p<0.05) and feed intake (p<0.001) were observed in $T_4$. Mortality (p<0.01), FCR (p<0.01), feed cost (p<0.05) and net profit (p<0.05) were significantly different among diets. Considering net profit, $T_2$ was the best performing dietary group followed by $T_3$, $T_1$, and $T_4$, respectively. The lowest lipid profiles were observed in $D_3$ followed by $D_1$, $D_4$, and $D_2$, respectively (p<0.05). In experiment 2, the lowest total cholesterol, TG, and the highest amount of high density lipoprotein were observed in $T_2$, followed by $T_3$, $T_1$, and $T_4$, respectively (p<0.05). Evidently but not significantly, low density lipoprotein was the highest in $T_2$ followed by $T_3$, $T_4$, and $T_1$, respectively (p>0.05). Conclusion: In conclusion, Azolla and acidifier reduced lipid profiles of broiler chickens. Considering net profit and lipid profiles, 5% Azolla may be the suitable dietary group for producing safe and profitable broilers. However, more studies are needed to confirm this study prior to suggesting using Azolla in the poultry industry.

• Journal of Ginseng Research
• /
• v.27 no.4
• /
• pp.202-206
• /
• 2003

This study was conducted to compare the growth status of aerial parts, photosynthesis and microclimate between fixing light transmittance (Control) and changing light transmittance (C.L.T.) during ginseng growing seasons. Control showed 8％ light transmittance rate during growing seasons. But C.L.T. showed 18％ light transmittance rate during early (April-June) and late growth stage (September-October) and 6％ light transmittance rate middle growth stage(July-August). Air temperature, leaking water rate and soil water content of C.L.T. was higher than those of control during early and late growth stage. But Air temperature, leaking water rate and soil water content of C.L.T was lower than those of control during middle growth stage C.L.T. exhibited superiority in survival ratio, stem diameter, stem length, L.A.I. and stem angle compared to control. Chlorophyll content of C.L.T. was lower than that of control but S.L.W., stomatal opening and photosynthetic rates of C.L.T. was higher than those of control. Also Alternaria blight disease and defoliation of C.L.T. was lower than those of control.

• Korean Journal of Metals and Materials
• /
• v.48 no.12
• /
• pp.1090-1096
• /
• 2010

This pitting corrosion study of welded joints of austenitic stainless steels (AISI 304L and 316L) has addressed the differentiating solidification mode using three newly introduced filler wires with a flux-cored arc welding process (FCAW). The delta ferrite (${\delta}$-ferrite) content in the welded metals increased with an increasing equivalent weight ratio of chromium/nickel ($Cr_{eq}/Ni_{eq}$). Ductility dip cracking (DDC) was observed in the welded metal containing ferrite with none of AISI 304L and 0.1% of AISI 316L. The potentiodynamic anodic polarization results revealed that the $Cr_{eq}/Ni_{eq}$ ratio in a 3.5% NaCl solution didn't much affect the pitting potential ($E_{pit}$). The AISI 316L welded metals with ${\ddot{a}}$-ferrite content of over 10% had a superior $E_{pit}$ value. Though the AISI 316L welded metal with 0.1% ferrite had larger molybdenum contents than AISI 304L specimens, it showed a similar $E_{pit}$ value because the concentration of chloride ions and the corrosion product induced severe damage near the DDC.

• Steel and Composite Structures
• /
• v.19 no.5
• /
• pp.1299-1319
• /
• 2015

This paper presents a detailed parametric study, conducted using finite element tools to cover a range of several geometric and material parameters, on the behaviour of thin-walled partially encased composite (PEC) columns. The PEC columns studied herein are composed of thin-walled built-up H-shaped steel sections with concrete infill cast between the flanges. Transverse links are provided between the opposing flanges to improve resistance to local buckling. The parametric study is confined to eccentrically-loaded columns subjected to major axis bending only. The parameters that were varied include the overall column slenderness ratio (L/d), load eccentricity ratio (e/d), link spacing-to-depth ratio (s/d), flange plate slenderness ratio (b/t) and concrete compressive strength ($f_{cu}$). The overall column slenderness ratio was chosen to be the primary variable with values of 5, 10 and 15. Other parameters were varied within each case of L/d ratio. The effects of the selected parameters on the behaviour of PEC columns were studied with respect to the failure mode, peak axial load, axial load versus average axial strain response, axial load versus lateral displacement response, moment versus lateral displacement behaviour and the axial load-moment interaction diagram. The results of the parametric study are presented in the paper and the influences of each of the parameters investigated are discussed.

• Korean Journal of Environmental Agriculture
• /
• v.23 no.1
• /
• pp.41-46
• /
• 2004

The influence of pollutant loads on the water quality in Jeongeupcheon of Dongjin river was evaluated from Jan. 2002 to Dec. 2003 for two years. The range of pH in water was $6.87{\sim}7.53$. The EC level in upstream ranged from 83 to $95\;{\mu}s/cm$ with the highest value in autumn. The BOD level in upstream rang ed from 0.61 to 1.27 mg/L, which would be I grade according to water quality criteria by Ministry of Environment, but that in downstream was III grade. The average T-N level in midstream ranged from 6.10 to 10.84 mg/L which was the highest values throughout the stretch of the river. The average T-P levels ranged from. 0.41 to 0.98 mg/L Jeongeupcheon was suitable for the agricultural usage based upon one year analysis of river water quality. The effluent loads of BOD was high in midstream (J4) with 553 kg/day. The major sources of T-N loads were livestock, population, land use, and industry in order. The effluent loads of T-N was high in J4 by population and industry while that of T-N was high in J5 and J6 by livestock and land use. The delivered loads of T-N was high in downstream The delivered loads of T-P was low as compared with those of BOD and T-N. The delivery ratio of T-N ranged from 6 to 38%.