• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.12
• /
• pp.3117-3132
• /
• 2012

The tree topology in multicast systems has high transmission efficiency, low latency, but poor resilience to node failures. In our work, some nodes are selected as backbone nodes to construct a tree-like core overlay. Backbone nodes are reliable enough and have strong upload capacity as well, which is helpful to overcome the shortcomings of tree topology. The core overlay is organized into a spanning tree while the whole overlay is of mesh-like topology. This paper focuses on improving the performance of the application-layer multicast overlay by optimizing the core overlay which is periodically adjusted with the proposed optimization algorithm. Our approach is to construct the overlay tree based on the out-degree weighted reliability where the reliability of a node is weighted by its upload bandwidth (out-degree). There is no illegal solution during the evolution which ensures the evolution efficiency. Simulation results show that the proposed approach greatly enhances the reliability of the tree-like core overlay systems and achieves shorter delay simultaneously. Its reliability performance is better than the reliability-first algorithm and its delay is very close to that of the degree-first algorithm. The complexity of the proposed algorithm is acceptable for application. Therefore the proposed approach is efficient for the topology optimization of a real multicast overlay.

• Journal of Information Processing Systems
• /
• v.18 no.1
• /
• pp.1-11
• /
• 2022

Online video telephony systems have been increasingly used in several industrial areas because of coronavirus disease 2019 (COVID-19) spread. The existing session initiation protocol (SIP)-based video call system is being usefully utilized, however, there is a limitation that it is very inconvenient for users to transmit additional information during conversation to the other party in real time. To overcome this problem, an enhanced scheme is presented based on augmented real-time reality (AR). In this scheme, augmented information is automatically searched from the Internet and displayed on the user's device during video telephony. The proposed approach was qualitatively evaluated by comparing it with other conferencing systems. Furthermore, to evaluate the feasibility of the approach, we implemented a simple network application that can generate SIP call requests and answer with AR object pre-fetching. Using this application, the call setup time was measured and compared between the original SIP and pre-fetching schemes. The advantage of this approach is that it can increase the convenience of a user's mobile phone by providing a way to automatically deliver the required text or images to the receiving side.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.6
• /
• pp.1743-1758
• /
• 2023

Automatic modulation classification is a critical algorithm for non-cooperative communication systems. This paper addresses the challenging problem of closed-set and open-set signal modulation classification in complex channels. We propose a novel approach that incorporates a self-learning filter and center-loss in Deep Residual Shrinking Networks (DRSN) for closed-set modulation classification, and the Opendistance method for open-set modulation classification. Our approach achieves better performance than existing methods in both closed-set and open-set recognition. In closed-set recognition, the self-learning filter and center-loss combination improves recognition performance, with a maximum accuracy of over 92.18%. In open-set recognition, the use of a self-learning filter and center-loss provide an effective feature vector for open-set recognition, and the Opendistance method outperforms SoftMax and OpenMax in F1 scores and mean average accuracy under high openness. Overall, our proposed approach demonstrates promising results for automatic modulation classification, providing better performance in non-cooperative communication systems.

• Journal of the Korean earth science society
• /
• v.21 no.2
• /
• pp.93-102
• /
• 2000

The purpose of this study is to investigate Earth Systems Education, its matter and also its possibility of practical application in Korea. Some attempts are made to see the value of the Earth Systems Education. Adopting two kinds of Korean science textbooks of middle school and activity of Earth Systems Education were analyzed. The interview with teachers is implemented for the study on objective, the structure of matter and teaching strategy in Earth Systems Education. The program is given to 96 students(2 classes, the first grade at middle school). To analyze the effect of Earth Systems Education program, students were interviewed by their teacher. The conclusions of this study are as follows: 1. The Earth Systems Education is contributed to the way to enable students to have a cognitive perspective about the earth and to look for the nature. Earth Systems Education is to use interdisciplinary approaches for integration in science. 2. The result of analysis in the contents of Korean science textbooks, the viewpoints about Earth Systems Education were not found, but the accounts about the interactions among subsystems were found. 3. According to the results of interview with teachers, they approve of system approach, the structure of matter and teaching strategy of Earth Systems Education. 4. According to the results of interview with students, they understand the interactions among subsystems which are elements of Earth Systems. As a results, Earth Systems Education is a effective method for informed judgements about Earth and science and manner for work for integration in science curriculum. So Earth Systems Education be applied to science education in Korea.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.3
• /
• pp.19-26
• /
• 2009

It is becoming more and more important to develop safety-critical systems with special attention. Examples of the safety-critical systems include the mass transportation systems such as high speed trains, airplanes, ships and so forth. Safety critical issues can also exist in the development of atomic power plants that are attracting a great deal of attention recently as oil prices are sky-rocketing. Note that the safety-critical systems are in general large-scale and very complex for which case the effects of adopting the systems engineering (SE) approach has been quite phenomenal. Furthermore, safety-critical requirements should necessarily be realized in the design phase and be effectively maintained thereafter. In light of these comments, we have considered our approach to developing safety-critical systems to be based on the method combining the systems engineering and safety management processes. To do so, we have developed a design environment by constructing a whole life cycle model in two steps. In the first step, the integrated process model was developed by integrating the SE (ISO/IEC 15283) and systems safety (e.g., hazard analysis) activities and implemented in a computer-aided SE tool environment. The model was represented by three hierarchical levels: the life-cycle level, the process level, and the activity level. As a result, one can see from the model when and how the required SE and safety processes have to be carried out concurrently and iterately. Finally, the design environment was verified by the computer simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1448-1451
• /
• 1997

In this paper, a speed control of nin-servo induction motor is considered. In this case, it is difficult to satisfy precise control performance. SO H.inf. robust controller is designed for this problem by usign polynomial approach and Youla parameterization.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.42
• /
• pp.121-130
• /
• 1997

The purpose of this study was to find altermatives on restructuring of distribution system and rationalization of management in tourism industry. A theoretical approach was used to determine how principle concepts and strategies in marketing can be applied into tourism industries.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.44.4-44
• /
• 2001

A new approach to design and control mobile manipulators is presented in this paper, associating genetic algorithm to multicriteria optimization to generate and value the robots according to the constraints and aims of the task. Then the first step of this approach is detailed, as topologies and configurations of manipulators that can assume position, trajectory, speed or force task are studied.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.36-48
• /
• 1992

This paper describes motion control system applied to mechatronics devices. It is pointed out that a new approach is necessary to realize a good performance motion control. At first, a motion controller of mechatronics devices is introduced. The controller is constructed from four layer of hierarchical structure. After that two practical examples are presented to introduce the new approach to advanced motion control exactly.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5642-5670
• /
• 2017

Antivirus is an important issue to the security of virtual machine (VM). According to where the antivirus system resides, the existing approaches can be categorized into three classes: internal approach, external approach and hybrid approach. However, for the internal approach, it is susceptible to attacks and may cause antivirus storm and rollback vulnerability problems. On the other hand, for the external approach, the antivirus systems built upon virtual machine introspection (VMI) technology cannot find and prohibit viruses promptly. Although the hybrid approach performs virus scanning out of the virtual machine, it is still vulnerable to attacks since it completely depends on the agent and hooks to deliver events in the guest operating system. To solve the aforementioned problems, based on in-memory signature scanning, we propose an agentless runtime antivirus system VirtAV, which scans each piece of binary codes to execute in guest VMs on the VMM side to detect and prevent viruses. As an external approach, VirtAV does not rely on any hooks or agents in the guest OS, and exposes no attack surface to the outside world, so it guarantees the security of itself to the greatest extent. In addition, it solves the antivirus storm problem and the rollback vulnerability problem in virtualization environment. We implemented a prototype based on Qemu/KVM hypervisor and ClamAV antivirus engine. Experimental results demonstrate that VirtAV is able to detect both user-level and kernel-level virus programs inside Windows and Linux guest, no matter whether they are packed or not. From the performance aspect, the overhead of VirtAV on guest performance is acceptable. Especially, VirtAV has little impact on the performance of common desktop applications, such as video playing, web browsing and Microsoft Office series.