• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.676-678
• /
• 2016

Noise occurs in the process of obtaining, transmission, and processing in image processing systems and these noises lower the resolution of image and cause visual errors. Currently, a representative filter to remove salt and pepper noise is SMF(standard median filter) but it is inadequate in preserving edge as the noise field expands. Therefore, for salt and pepper noise enviroment, the study suggested and algorithm that are places with original pixel when the central pixel is non-noise and process by applying weighted value on areas with less local mask pixel changes when there is noise.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.1
• /
• pp.19-26
• /
• 2016

In this study, a bidirectional DC-DC converter for idle stop and go (ISG) is developed to reduce fuel consumption. A three-phase non-isolated half-bridge converter is selected through a design method by considering efficiency and volume. According to the state of charge of the batteries at both the low-voltage and high-voltage sides, buck mode, which charges a low-voltage battery from the generated motor energy, and boost mode, which provides power to the motor from the low- and high-voltage battery sides, are required in the ISG system. Hence, an autonomous and seamless bidirectional control method using a variable current limiter is proposed for mode change. A 1.8 kW engineering sample of the proposed converter has been built and tested to verify the validity of the proposed concept. The maximum efficiencies, including gate driver and control circuit losses, are 96.4% in charging mode and 96.1% in discharging mode.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.5
• /
• pp.235-242
• /
• 2013

Recently, the number of automotive electrical and electronic system has been increased because the requirements for the convenience and safety of the drivers and passengers are raised. In most cases, the data for controlling the various sensors and automotive electrical and electronic system used in runtime should be stored on the internal or external non-volatile memory of the ECU(Electronic Control Units). However, the non-volatile memory has a constraint with write limitation due to the hardware characteristics. The limitation causes fatal accidents or unexpected results if the non-volatile memory is not managed. In this paper, we propose a management scheme for using non-volatile memory to prolong the writing times based on AUTOSAR(AUTOmotive Open System Architecture) platform. Our proposal is implemented on the CDD(Complex Device Driver) and uses an algorithm which swaps a frequently modified block for a least modified block. Through the development of the prototype, the proposed scheme extends the lifetime of non-volatile memory about 1.08 to 2.48 times than simply using the AUTOSAR standard.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.115-121
• /
• 2008

The communication-based train control (CBTC) technology is a kind of railway signaling technologies and is to control the train operation through communication. A project adopting the CBTC technology is in progress and its object is to develop interoperable and interchangeable subsystems. Thus the purpose of this paper is on how to develop the required subsystems and integrate them successfully without sufficient design information at the system level. Accordingly this project shall require the integration and test at the system level. In order to do so, a top-level system specification shall be needed, which is not available in the current phase of the project. The main objective of the test and evaluation activities is to see whether the developed system meets the system specification. In this paper, we describe how the test and evaluation can be carried out based on the subsystems design specifications, considering the system architecture and the operation concept of the existing system as well.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.265-268
• /
• 2011

Voice over Internet protocol(VoIP) is support a VoIP service as All-IP method and Gateway method etc. All-IP method to the unit in an Internet environment by applying both the IP service is an VoIP system. Gateway method, using a normal phone call in a way that the Internet is using VoIP. In this paper, scanning and analyze the vulnerability for VoIP systems and networks from All-IP method and the Gateway method In the test bed. All-IP method and Gateway method found in the VoIP vulnerabilities, hacking attack, a denial of service attacks and VoIP spam attacks are carried out. Through analysis of post-attack security measures is proposed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.341-348
• /
• 2011

Exact and rapid acquirement of ocean environment information is going to become more of an indispensable source of naval operations. Ocean surface measurements using High Frequency (HF) radar, which covers about 10-220km and has spatial resolution of 0.3-12km, have being operated in our country. It remotely observe and transmit realtime sea surface currents and waves. In the near future, the HF radar systems will be established along the whole coastal area. A performance of network of HF radar will support various marine and naval activities. Operational uses of HF radar for enhancing naval operation ability are suggested.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2011.06a
• /
• pp.23-24
• /
• 2011

본 논문에서는 승객 수송수요 반영 단계에서는 역별 승하차인원, 시간대별 재차인원 등 수송수요에 반영할 기준을 설정하여 수송력과 승차인원의 기준을 판단하고, 열차운행계획 수립 단계에서는 운행구간, 선로용량, 선로조건 등 제약조건과 적정수송력에 맞는 운행계획을 수립하고, 마지막 단계에서 경제성, 능률성, 합리성 등을 감안한 운용효율 향상을 위한 열차 DIA를 작성하고자 한다. 또한 통계적 분석절차에 따라 재차인원과 운행횟수를 각각의 독립변수와 종속변수로 산정하여 두 변수간의 상관관계를 확인한 후 회귀분석을 통해 얻은 회귀식을 실제열차운행 횟수와 비교하여 최적의 열차운행횟수를 산정하였으며 회귀식의 유효성 검증을 통해 열차운행 환경변화에 신속하게 대응할 수 있는 유연한 시스템을 구축한 후 서울도시철도공사 실용 Dia에 적용하여 유효성을 검토하였다.

• Journal of Microbiology and Biotechnology
• /
• v.1 no.3
• /
• pp.157-162
• /
• 1991

Conditions for glutathione production in E. coli cells which possess pGH501 (2 gshI+gshII) were studied. In terms of ATP supply for the glutathione synthesis, two different systems have been constructed and compared. When the acetate kinase reaction of E. coli was used for ATP generation, 20 mM of L-cysteine was completely converted to glutathione by toluene-treated E. coli cells (100 mg/ml) harboring pGH501 within 2 h at $37^{\circ}C$. However, considering the economical aspects, the glycolytic pathway of yeast was chosen as a better system for ATP generation. The optimal concentrations of reactants for glutathione production were determined to be as follows; 80 mM L-glutamate, 20 mM L-cysteine, 20 mM glycine, 20 mM $MgCl_2$, 50 mM potassium phosphate buffer (pH 7.5), 400 mM glucose, polyoxyethylene stearylamine ($5\;\mul/ml$), toluene-treated E. coli HB101/pGH501 (100 mg/ml), and dried yeast cells (400 mg/ml). The conversion ratio of L-cysteine to glutathione was 80% (about 5 mg/ml) under optimal condition within 6 h at $37^{\circ}C$.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.1164-1167
• /
• 2021

동절기, 야간 등 도로에서 결빙으로 인한 연쇄 추돌 사고는 교통 체증 및 2차 사고의 위험으로 이어진다. 도로 중 결빙 발생 다발 지역인 지방도로, 터널 출입구, 교량 구간, 산기슭 도로, 그늘진 곡선 도로를 대상으로 C-ITS 관점 안전운전 결빙 주의보 애플리케이션을 제공하여 결빙으로 발생하는 사고를 미리 예방하고자 한다. 노면/기상 상태를 아두이노, 기상 api로 측정, 차량 운전자용 앱(GIS/맵 기반) 구현을 통해 앱 사용 운전자 간 양방향 V2V, 운전자와 아두이노 센서 간 V2I 통신으로 결빙으로부터 운전자를 보호함에 있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5A
• /
• pp.463-473
• /
• 2010

The purpose of this study was to investigate the performance of precast concrete copings for precast segmental PSC bridge columns. The proposed system can reduce work at a construction site and makes construction periods shorter. The precast concrete copings provides an alternative to current cast-in-place systems, particularly for areas where reduced construction time is desired. A model of precast concrete copings was tested under quasistatic monotonic loading. As a result, proposed precast coping system was equal to existing cast-in-place system in terms of required performance. In the companion paper, the experimental and analytical study for the performance assessment of precast concrete copings for precast segmental PSC bridge columns is performed.