• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.165-170
• /
• 1992

In this paper, the Hardware-In-The-Loop Simulation(HILS) of missile systems are studied. The HILS is an effective performance evaluation technique that bridges the simulation fidelity gap between analytic all-digital simulations and actual flight tests of missile systems. The HILS may be required to perform system integration tests, performance evaluation at system or subsystem level. Major elements of this HILS facility will include the flight table, simulation computers, I/O computer and peripheral equipments. HILS of missile systems typically involve computer modeling of flight dynamics coupled with a hardware guidance and control(G/C) systems. This paper describes a real time performance evaluation technique of a G/C system, Development of a HILS for a Autopilot of SAM G/C will be used as an example.

• Asia pacific journal of information systems
• /
• v.13 no.2
• /
• pp.199-217
• /
• 2003

Based on the IS literature on software project risk management, we developed an integrated model to investigate the risk factors and risk management factors in project development. We also analyzed the interrelation between project risk and project risk management. The questionaries are collected from 83 project leaders. We tested reliability and validity of the measure and analyzed the obtained data. The results support our risk-based hypothesis that shows the importance of risk management in reducing project risks and improving performance of project and process.

• Environmental Engineering Research
• /
• v.19 no.3
• /
• pp.269-274
• /
• 2014

On-site sanitation systems are typically installed to treat grey and toilet wastewaters in areas without sewer and centralized treatment systems. It is well known that, due to inappropriate design and operation, treatment performance of these systems in developing countries is not satisfactory in the removal of pathogens and organic matters. This research aimed to investigate the hydraulic conditions occurring in some on-site sanitation systems and the effects of hydraulic retention times (HRTs) on the system performance. The experiments were conducted with a laboratory-scale septic tank (40L in size) and an actual septic tank (600L in size), to test the hydraulic conditions by using tracer study with HRTs varying at 12, 24 and 48 hr. The experimental results showed the dispersion numbers to be in the range of 0.017-0.320 and the short-circuit ratios in the range of 0.014-0.031, indicating the reactors having a high level of sort-circuiting and approaching complete-mix conditions. The removal efficiency of $BOD_5$ was found to be 67% and the $k_{30}$ values for $BOD_5$ was $2.04day^{-1}$. A modified complete-mix model based on the relationship between $BOD_5$ removal efficiencies and HRTs was developed and validated with actual-scale septic tank data having a correlation coefficient ($R^2$) of 0.90. Therefore, to better protect our environment and minimizing health risks, new generation toilets should be developed that could minimize short-circuiting and improving treatment performance.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.4
• /
• pp.54-62
• /
• 2014

This paper is present the Technology Orientation affects to Enterprise Management Performance. In order to carry out this research, we obtained 212 survey sheets and inspected ten assumptions based on the reliability, validity of the questionnaires. The results of regression analysis are summarized as follows; First, the factor of Technology Orientation, research development activity, affects to all factor of Enterprise Management Performance significantly. Second, the factor of Technology Orientation, research development environment, only effect on the technology performance. Third, research development ability is affect to technology performance and new product performance that factor of Enterprise Management Performance. Finally, technology industrialization ability isn't affects to Enterprise Management Performance significantly. Based on the results, we are recommendations for small and medium-sized manufacturing enterprises.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.5
• /
• pp.604-610
• /
• 2014

In this paper, the analysis and the experiment of independent multi-phase BLDC motor are performed. The back-emf, iron loss analysis are performed by the finite element method and compared with experimental results. The independent multi-phase BLDC motor is manufactured and to measure the efficiency of the motor, evaluation system is also manufactured including the load generator. By comparing the analytic and the experimental results, the effectiveness of the analysis model is verified when calculating the efficiency of the motor.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.4_2
• /
• pp.981-989
• /
• 2024

In recent years, there has been a growing focus on preserving the global environment and utilizing resources efficiently. The significance of energy conservation has led to the development of systems that recycle waste heat from factories and use eco-friendly refrigerants. This study aims to enhance the performance of adsorption-desorption systems using thermoelectric devices, which are known for their ability to convert temperature differences into electrical energy. The research focuses on improving the efficiency of these systems by integrating thermoelectric modules to cool the adsorption side and heat the desorption side, thus enhancing overall system performance. The experiments utilized a typical thermoelectric device and silica gel as the adsorbent. Key experimental parameters included varying the inlet air temperature and relative humidity on the desorption side. The results indicated that increasing the relative humidity of the inlet air on the desorption side significantly enhanced the overall mass transfer coefficient while reducing the completion time of the process. Similarly, higher inlet air temperatures led to an increase in the mass transfer coefficient and a decrease in process completion time. These findings suggest that optimizing the operational conditions of thermoelectric devices can substantially improve the performance of adsorption-desorption systems, offering potential benefits for applications in ventilation systems and other related fields.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.4
• /
• pp.271-276
• /
• 2021

Arc fault detector based on multilevel DWT with analysis of high-frequency noise components over 100 kHz is proposed in this study to improve the performance in detecting serial arcs and distinguishing them from inverter noise in PV systems. PV inverters generally operate at a frequency range of 20-50 kHz for switching operation and maximum power tracking control, and the effect of these frequency components on the signal for arc detection leads to negative arc detection. High-speed ADC and multilevel DWT are used in this study to analyze frequency components above 100 kHz. Such high frequency components are less influenced by inverter noise and utilized to detect as well as separate DC series arc from inverter noise. Arc detectors identify the input current of PV inverters using a Rogowski coil. The sensed signal is filtered, amplified, and used in 800kSPS ADC and DWT analysis and arc occurrence determination in DSP. An arc detection simulation facility in UL1699B was constructed and AFD tests the proposed detector were conducted to verify the performance of arc detection and performance of distinction of the negative arc. The satisfactory performance of the arc detector meets the standard of arc detection and extinguishing time of UL1699B with an arc detection time of approximately 0.11 seconds.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.5
• /
• pp.452-458
• /
• 2020

In this paper, the contents of the development of RESS(Radar Environmental Signals Simulator) for the test of active phased array multi-function radar are described. The developed RESS can simulate multiple target environments, such as target/jamming/missile response/cluster signals, by using received radar operational information and simulated scenario. It can also modulate frequency, phase, gain, timing on all waveforms operated by multi-function radar and simulated two targets and one jamming in the beam. The RESS can be used to perform functional and performance verification of the active phased array multi-function radar with sub-array receiving structures.

• Asia pacific journal of information systems
• /
• v.12 no.3
• /
• pp.135-167
• /
• 2002

This research focuses on the IS development methodology as an object of innovation in an IS organization. It has two main research objectives. It was intended to understand the critical affecting factors which have an effect on the processing of each level in the dynamic and evolving innovation process. There are two levels of innovation process: initiation and implementation. It was also intended to understand the performance of IS organizational innovation. We found three main results by the LISREL analysis. First, main factors affecting initiation level of innovation are innovative tendency of IS members, communication level of IS organization, existence of champion manager, IS performance gap, executive supporting to IS, and relative advantage of IS development methodology. At the implementation level, it was understood that the existence of champion manager, executive support, and relative advantage of IS development methodology were the main factors promoting to use the innovation, and the complexity of innovation was a negative factor adopting the usage of innovation. Second, the quality of the previous level in the gradual innovation activities gives very notable affection to the continuous next level. Finally, it was found that the qualitative performance like the documentation, collaborative team approach, IS developer's awareness and ability corresponding to their task and so on was improved due to the IS organizational innovation. This research provides the standard framework for the IS organizational innovation in a structural way. In the practical aspect, it may be used as the principle for introducing and using the IS development methodology.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.146-148
• /
• 2001

Pressures on the development of embedded control systems with higher performance and quality are increasing now, and the development of embedded control systems are still difficult. Hence, fast and reliable development method for implementing embedded control systems are necessary. Rapid prototyping is a powerful method to solve these problems. With the use of this method, the graphical representation of a model is converted to code that executes the model. In this paper, the development procedure of embedded control systems has been automated using this new technology. Also, an application example about lambda control in automotive engine has been carried out.