• 한국해양학회지:바다
• /
• 제18권1호
• /
• pp.21-31
• /
• 2013

생태모델은 생태계 구성 요소간의 관계를 수치적으로 표현하여 생태계 내에 존재하는 다양한 요인들의 시간에 따른 내재적 변동과 외부 조건의 변화에 따른 반응을 예측하는데 유용한 도구다. 해양 생태모델은 학제간 공동 연구결과를 토대로, 보다 체계적이고 종합적인 접근 방법을 통해, 최근 수 십 년 동안 많은 발전을 이룩하였다. 이 글은 해양 생태모델의 이론적 배경을 살피고, 모델 수립 시 고려해야 할 사항 및 최근 동향에 대하여 소개한다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.221-226
• /
• 2004

For comparing more than two images, the precise geometric corrections should be preceded because it necessary to eliminate systematic errors due to basic sensor information difference and non-systematic errors due to topographical undulations. In this study, we did sensor modeling using satellite sensor information to make a basic map of change detection for artificial topography. We eliminated the systematic errors which can be occurred in photographing conditions using GCP and DEM data. The Kompsat EOC images relief could be reduced by precise rectification method. Classifying images which was used for change detections by city and forest zone, the accuracy of the matching results are increased by 10% and the positioning accuracies also increased.

• Journal of Power Electronics
• /
• 제16권3호
• /
• pp.970-981
• /
• 2016

Leakage currents occur in pulse-width-modulated voltage source inverter (PWM-VSI)-fed permanent magnet synchronous motor (PMSM) drives for air-conditioners, which seriously affect system safety and operation performance. High accuracy modeling and prediction of leakage currents are key issues for the design and implementation of air-conditioning products. In this study, the generation mechanism of leakage currents is discussed. A systematic modeling approach of leakage currents is proposed, including the modeling of leakage current sources and leakage current paths. By using the proposed approach, the complete model of leakage currents in PWM-VSI-fed PMSM drives for air-conditioners has been developed based on the extraction of all parameters. A comparison between the simulated leakage currents based on the developed model and measured leakage currents in the outdoor unit of an air-conditioning product is conducted. The comparison verifies the effectiveness of the proposed modeling approach, and the developed model exhibits high accuracy within a wide frequency range.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권1호
• /
• pp.37-47
• /
• 2018

Dynamic simulation is critical for electrical ship studies as it obtains the necessary information to capture and characterize system performance over the range of system operations and dynamic events such as disturbances or contingencies. However, modeling and simulation of the interactive electrical and mechanical dynamics involves setting up and solving system equations in time-domain that is typically time consuming and computationally expensive. Accurate assessment of system dynamic behaviors of interest without excessive computational overhead has become a serious concern and challenge for practical application of electrical ship design, analysis, optimization and control. This paper aims to develop a systematic approach to classify the sophisticated dynamic phenomenon encountered in electrical ship modeling and simulation practices based on the design intention and the time scale of interest. Then a novel, comprehensive, coherent, and end-to-end mathematical modeling and simulation approach has been developed for the latest Medium Voltage Direct Current (MVDC) Shipboard Power System (SPS) with the objective to effectively and efficiently capture the system behavior for ship-wide system-level studies. The accuracy and computation efficiency of the proposed approach has been evaluated and validated within the time frame of interest in the cast studies. The significance and the potential application of the proposed modeling and simulation approach are also discussed.

• 한국가스학회지
• /
• 제20권4호
• /
• pp.65-77
• /
• 2016

Fischer-Tropsch 반응기 내 복잡한 반응과 흐름을 상세히 모델링하는 것은 CFD 분야에 있어 도전적 과제이다. Fischer-Tropsch 반응은 여러 가지 탄소수를 가진 탄화수소들을 만들어내는데, 탄화수소에는 무수히 많은 이성질체가 존재하는 이유로 모든 화학종에 대해서 각각의 반응속도식을 도출해 적용하는 것은 어렵다. 이의 극복을 위해 기존 연구들에서 사용된 반응속도식 모델링 방법론들을 분석한 뒤, 화학종별 상세한 반응속도식 적용을 위해 non-Anderson-Schulz-Flory 방법론을 선정하여 상세 모델링을 진행하였다. 또한 반응 특성상 다상 흐름 형태를 띠는데, 다상 흐름 모델링의 경우 상간의 간섭이나 분산상의 분포 및 유동 형태 등에 따라 적합한 모델링 방법론이 다르다. 그러나 기존 연구들에서는 타당성에 대한 논의나 근거 제시 없이 각양각색의 내부 흐름 모델링 방법론이 사용되고 있다. 실험을 통해 내부 흐름 형태를 관찰한 뒤 유동 형태에 따른 모델링을 진행하는 것이 최선이나, 자원 여건상 어려움이 있어, 본 연구에서는 전통적인 유체역학 이론에 근거해 내부 흐름 형태를 먼저 추론하고 Mixture 모델 방법론을 선정하여 체계적인 CFD 모델링을 진행함으로써, 사용된 방법론에 대한 근거를 마련하고자 하였다. 10가지 실험조건에서 진행한 실험 결과와 본 연구의 시뮬레이션 결과를 비교하였으며, 이를 통해 본 연구가 제안하는 체계적 모델링 방법론의 타당성을 입증하였다.

• 천문학회보
• /
• 제28권2호
• /
• pp.65-65
• /
• 2003

• 제어로봇시스템학회논문지
• /
• 제14권11호
• /
• pp.1174-1179
• /
• 2008

Many modeling and calibration methods have been developed to analyze and design the biological wastewater treatment process. For the systematic use of activated sludge model (ASM) in a real treatment process, a most important step in this usage is a calibration which can find a key parameter set of ASM, which depends on the microorganism communities and the process conditions of the plants. In this paper, a standardized calibration protocol of the ASM model is developed. First, a weighted effluent quality index(WEQI) is suggested far a calibration protocol. Second, the most sensitive parameter set is determined by a sensitive analysis based on WEQI and then a parameter optimization method are used for a systematic calibration of key parameters. The proposed method is applied to a calibration problems of the single carbon removal process. The results of the sensitivity analysis and parameter estimation based on a WEQI shows a quite reasonable parameter set and precisely estimated parameters, which can improve the quality and the efficiency of the modeling and the prediction of ASM model. Moreover, it can be used for a calibration scheme of other biological processes, such as sequence batch reactor, anaerobic digestion process with a dedicated methodology.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.920-927
• /
• 2009

Many schedule delays and cost overruns in interior construction are caused by a lack of understanding in detailed and complicated interior works. To minimize these potential impacts in interior construction, a systematic approach for project managers to detect discrepancies at early stages and take corrective action through use of visualized data is required. This systematic implementation is still challenging: monitoring is time-consuming due to the significant amount of as-built data that needs to be collected and evaluated; and current interior construction progress reports have visual limitations in providing spatial context and in representing the complexities of interior components. To overcome these issues, this research focuses on visualization and computer vision techniques representing interior construction progress with photographs. The as-planned 3D models and as-built photographs are visualized in a 3D walk-through model. Within such an environment, the as-built interior construction elements are detected through computer vision techniques to automatically extract the progress data linked with Building Information Modeling (BIM). This allows a comparison between the as-planned model and as-built elements to be used for the representation of interior construction progress by superimposing over a 3D environment. This paper presents the process of representing and detecting interior construction components and the results for an ongoing construction project. This paper discusses implementation and future potential enhancement of these techniques in construction.

• Progress in Superconductivity
• /
• 제4권1호
• /
• pp.19-26
• /
• 2002

We have earlier developed a 40-channel SQUID system. An important figure of merit of a MEG system is the localization error, within which the underlying current source can be localized. With this system, we investigated the localization error in terms of the standard deviation of the coordinates of the ECDs and the systematic error due to inadequate modeling. To do this, we made localization of single current dipoles from tangential components of auditory evoked fields. Equivalent current dipoles (ECD) at N1m peak were estimated based on a locally fitted spherical conductor model. In addition, we made skull phantom and simulation measurements to investigate the contribution of various errors to the localization error. It was found that the background noise was the main source of the errors that could explain the observed standard deviation. Further, the amount of systematic error, when modeling the head with a spherical conductor, was much less than the standard deviation due to the background noise. We also demonstrated the performance of the system by measuring the evoked fields to grammatical violation in sentence comprehension.

• 한국지능시스템학회논문지
• /
• 제17권2호
• /
• pp.276-283
• /
• 2007

It has been shown that the structure identification of a neuro-fuzzy model improves their accuracy performances in a various modeling problems. In this paper, we claim that the structure identification of a neuro-fuzzy model can also reduce the degree of inconsistency of its fuzzy rulebase. Thus, the resulting neuro-fuzzy model serves as more like a structured knowledge representation scheme. For this, we briefly review a structure identification method of a neuro-fuzzy model and propose a systematic method to measure inconsistency of a fuzzy rulebase. The proposed method is applied to problems or fuzzy system reproduction and nonlinear system modeling in order to validate our claim.