• 지역사회간호학회지
• /
• 제29권3호
• /
• pp.359-370
• /
• 2018

Purpose: The purpose of this study is to identify effects of the variables of Health Action Process Approach (HAPA) Model on physical activity. Methods: This study has conducted a systematic literature review and meta-analysis. Sixteen articles were searched through electronic databases (PsycINFO, PubMed, CINAHL, Web of science, Science Direct, RISS, KMBASE, KoreaMed, KISS, DBpia) and additional journals from 2000 to July, 2017. To estimate the effect size (ES), the meta-analysis of the studies was performed by using Comprehensive Meta-Analysis programs. Results: The overall effect size of the variables of HAPA on physical activity was median (ES=.28). Of the core variables of HAPA model, action control (ES=.43) showed the largest effect size, followed by coping self-efficacy (ES=.31) and planning (ES=.31).Additional variables were identified as preparatory behavior (ES=.39) and past physical activity (ES=.24). Through the moderator effect analysis, the effect size was higher in the volitional phase than in the motivational phase, and higher in the healthy group than in the patient group. The higher the proportion of males and the lower the age, the larger the effect size. Conclusion: This finding shows empirical evidence that all core variables of the HAPA model are useful for predicting physical activity. We propose the use of the HAPA model to develop physical activity promotion intervention.

• 대한간호학회지
• /
• 제50권2호
• /
• pp.178-190
• /
• 2020

Purpose: The purpose of this study was to identify trends of nursing concept development in Korean journal papers to improve accurate understanding of nursing concepts. Methods: A systematic review of 216 concept development articles published from 1970 to 2018 that met the inclusion criteria was conducted using Research Information Sharing Service (RISS) databases. Results: The most common method of concept development was Walker and Avant's concept analysis method, identified in 139 (64.3%) of the 216 studies, followed by 48 examples of hybrid models (22.2%) and 15 examples of evolutionary methods (6.9%). Chinn and Kramer's method, Norris's clarification, Wilson's method, and others were also used. The concepts of "spirituality" and "fatigue" were most frequently analyzed. Among the 139 studies that used Walker and Avant's concept analysis method, 127 studies (91.4%) applied all the recommended steps; the others applied the recommended steps partially, omitting description of model cases/additional cases, antecedents/consequences, and empirical indicators. Among the studies using the hybrid model, among two (5.7%) did not describe attributes, three (8.5%) did not provide definitions, and 16 (45.7%) did not present empirical indicators in the final stage. Conclusion: Among concept development studies published in Korean journals, Walker and Avant's concept analysis method is most commonly used. In case of most studies using Walker and Avant's method a suitable concept analysis process is applied, but in case of other studies using the other concept development method, a suitable concept analysis process is not applied. Therefore, a suitable concept analysis process must be applied for concept development in nursing research.

• Journal of Mechanical Science and Technology
• /
• 제18권8호
• /
• pp.1327-1337
• /
• 2004

An efficient multi-objective optimization method is presented making use of neural network and a systematic satisficing trade-off method (STOM), in order to simultaneously improve both maneuverability and durability of tire. Objective functions are defined as follows: the sidewall-carcass tension distribution for the former performance while the belt-edge strain energy density for the latter. A back-propagation neural network model approximates the objective functions to reduce the total CPU time required for the sensitivity analysis using finite difference scheme. The satisficing trade-off process between the objective functions showing the remarkably conflicting trends each other is systematically carried out according to our aspiration-level adjustment procedure. The optimization procedure presented is illustrated through the optimum design simulation of a representative automobile tire. The assessment of its numerical merit as well as the optimization results is also presented.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
• /
• pp.166-169
• /
• 2008

문화콘텐츠산업에 있어서 만화가 원작콘텐츠로서 활성화되고 각광받기 위해서는 보다 체계적인 만화기획 및 제작 프로세스를 정립해야할 필요성이 있으며, 이론적인 체계와 분석기준을 통해 재미요소를 도출해내는 산업적 마인드를 가져야 할 것이다. 본 논문은 만화제작의 체계적인 프로세스를 정립하고 만화기획에 따른 프로세스별 만화의 구성요소를 도출하여 산업적인 효율성을 높이고자 하는 목적을 가진다. 그 결과 만화제작의 프로세스를 기초설정, 스토리 구성, 스토리텔링, 화면연출, 작화단계로 제시하였으며, 만화기획 단계별로 세부적인 구성요소와 결과물을 도출하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.245-246
• /
• 2012

Lately the Infill Modular Construction System which meets the domestic standards about the structure and fireproof performance and which is applied to the remodeling techniques is being emphasized. In order to introduce the Infill Modular Construction System to domestic market successfully, the development of insufficient element technologies and systematic analysis of process should be preceded. This research aims to establish of Standard Construction Process, as advanced research for the settlement of the Infill Modular Construction System. As advanced research for the activation of the Infill Modular Construction System, this research aims to develop Infill Unit Module's mobile device. This is expected to improve work efficiency. In addition organizing optimized Standard Construction Process by steady work analysis and improvement is being planned.

• 소성∙가공
• /
• 제12권7호
• /
• pp.647-653
• /
• 2003

A systematic approach for the process design in deep drawing is necessary to improve the quality of drawn cups. This study concentrates mainly on the influence of process design strategy on the product quality. Different types of process design were chosen from initial blank of 100mm in diameter to make final cup of 50mm in diameter. In order to make this cup, we used 2-stage deep drawing. Forming analyses are carried out to find out better design in terms of drawing force. It is proposed that the process design, in which maximum drawing forces during successive operations are equal, is a more desirable one. Through experiment, it is found that the proposed case shows equivalent values in terms of maximum drawing force during successive operations in real process and can achieve the best product quality in terms of dimensional accuracy. Thus, it is shown that proposed design is very effective in the improvement of quality in drawn cups and may be extended to deep drawing with more stages.

• 한국콘텐츠학회논문지
• /
• 제16권2호
• /
• pp.287-294
• /
• 2016

디자인을 개발하는데 있어 디자인의 계획에서부터 결과물을 도출시키는 전 과정의 디자인행위는 디자이너의 직관적인 관념과 기술적인 능력차이로 이루어지고 있다. 하지만 이러한 작업의 형태가 어떠한 규정된 틀에서 구체적인 방향으로 진행되기보단 개개인의 암묵적 행위 혹은 내재적 직관으로 이루어지고 있음을 디자인 전문가들은 모두가 공감하는 현상이다. 이러한 직관과 경험을 토대로 행해지는 디자인 작업을 합리적이고 과학적인 과정으로 시작하고 결과를 얻는다면 보다 체계적인 디자인작업을 다음단계로 이관 시킬 수 있다. 본 연구는 전문가와 비전문가의 디자인 적용방향을 실험으로 알아보기 위해 주방기구 개발 프로세스의 초기단계인 디자인 스케치과정 내용을 인지과학의 대표적인 질적연구 방법인 프로토콜 분석 방법을 활용하여 디자이너가 어떠한 사고시스템으로 디자인정보처리를 수행하고 작업하는지를 연구하고자 한다. 따라서 이 논문의 범위를 디자인 인지과학의 관련을 이해하는데 가장 기초가 되는 질적 연구방향에서 "주방기구에 대한 초기프로토콜 분석"과 "사고분석에 대한 코드화"에 한정시킬 것이다. 이러한 연구문제를 해결해가는 절차로 선행연구를 고찰하고 인지적인 사고를 체계적인 방법으로 재해석하여 제품의 개발흐름과 교육적 효과를 찾고자 하였다.

• 한국국방경영분석학회지
• /
• 제4권1호
• /
• pp.69-79
• /
• 1978

• 반도체디스플레이기술학회지
• /
• 제8권4호
• /
• pp.1-5
• /
• 2009

This investigation is applied Taguchi method and the analysis of variance(ANOVA) to the reactive ion etching(RIE) characteristics of $SiO_2$ film coated on a wafer with Experimental Analysis and Optimization of $CF_4/O_2$ Plasma Etching Process mixture. Plans of experiments via nine experimental runs are based on the orthogonal arrays. A $L_9$ orthogonal array was selected with factors and three levels. The three factors included etching time, RF power, gas mixture ratio. The etching rate of the film were measured as a function of those factors. In this study, the etching thickness mean and uniformity of thickness of the RIE are adopted as the quality targets of the RIE etching process. The partial factorial design of the Taguchi method provides an economical and systematic method for determining the applicable process parameters. The RIE are found to be the most significant factors in both the thickness mean and the uniformity of thickness for a RIE etching process.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.393-396
• /
• 2003

A systematic investigation for the process design in deep drawing is necessary to improve the quality of drawn cups. This study concentrates mainly on the influence of process design strategy on the product quality. Several types of process design were chosen from initial blank of 100mm in diameter to make final cup of 50mm in diameter. Forming analysis are carried out to find out optimal design in terms of drawing force. We assume that the case which shows minimum drawing force in the subsequent operations is the best case. Through experiments it is found that the case which shows minimum drawing force also results in minimum drawing force and better product quality than other case. Thus, it is shown that this design strategy is very effective in the improvement of quality in drawn cups.