• 무역상무연구
• /
• 제38권
• /
• pp.265-302
• /
• 2008

This paper intends to analyse some legal issues on "Zeroing" which is based on the article 2.4.2 under the WTO Anti-dumping Agreement. "Zeroing" stands for a specific methodology in calculating a general dumping margin for a product in question under which negative individual dumping margins are treated as zero (thus "zeroed") before aggregating all individual dumping margins. The article 2.4.2 of the Anti-dumping Agreement regulates three types of calculating methodology on dumping margin as first symmetrical method(average-to-average: A-A), second symmetrical method(individual-to-individual: I-I) and asymmetrical method(average-to-individual: A-I). However, this article does not have any provisions about the "Zeroing" practice. In their anti-dumping practices, the EC and the United-States calculated dumping margin based on the "Zeroing", but this methodology has been disputed in the Dispute Settlement Body(DSB) of the WTO. This paper analysed their legal problems with some WTO cases in particular concerning EC-Bed Linen, U.S.-Softwood Lumber Zeroing, U.S.-Zeroing(EC) and U.S.-Sunset Review(Japan) cases. On the basis of theses analysis, we can therefore ask some questions as follows; To begin with, although the article 2.4.2 of the WTO Anti-dumping Agreement does not clearly refer to the "Zeroing", how do some developing countries, as the U.S.A and the E.U. calculate dumping margin as the "Zeroing"? Secondly, what is the relationship between the symmetrical method and asymmetrical method to the dumping margin? And if we adopt the zeroing method, what is the different rate to anti-dumping margin? Thirdly, although the Panel decided that the zeroing methodology of dumping margin used by th U.S.A in administrative review between the U.S.A and the E.U, why does the Appellate Body made the decision that the american methodology is incompatible with the WTO Anti-dumping Agreement? Lastly, what will be affected the upper decision taken by the Appellate Body to the DDA negotiation of anti-dumping matters? Even though the WTO Appellate made a decision that the zeroing method is incompatible with the principles of the WTO law, this methodology contains a lot of problems. Some members of the WTO as the U.S.A and the E.U did not officially declare this methodology to abandon, and the debate concerned is arguing. Therefore this paper tried to present the adequate solution in order to promote the zeroing methodology in the international anti-dumping system and practices.

• Nuclear Engineering and Technology
• /
• 제27권4호
• /
• pp.518-531
• /
• 1995

단일수로 해석 모형을 다수로 해석 모형으로 대체할 경우 얻을 수 있는 열적 여유도 향상에 대한 연구를 수행하였다. 이를 위하여 17$\times$17 국산핵 연료 장전 노심에 적용할 수 있는 새로운 임계열속 상관식을 개발하였으며, 여기에 사용된 부수로 국부 조건은 다수로 해석 코드인 TORC로 계산하였다. 그리고, 고온부구로 DNBR 분석을 위하여 전 노심에 대한 단일단계 해석 모형을 개발하였다. 분석 결과 다수로 해석 모형인 TORC/KRB-1 체제를 사용할 경우 단일수로 해석 모형인 PUMA/ERB-2 체제에 비하여 약 5% 이상의 열적 여유도를 회복할 수 있는 것으로 나타났다. 이러한 열적 여유도의 증가는 두 코드간의 고온부수로 국부조건 예측 성능 차이와 임계열속 상관식의 특성 차이에서 기인한 것이다.

• Journal of electromagnetic engineering and science
• /
• 제6권3호
• /
• pp.189-195
• /
• 2006

In this paper, the derivation of the protection ratio for the digital microwave system with diversity is newly suggested for a basic guidance of initial planning for frequency coordination, and computational results are presented for an actual radio frequency band. The net filter discrimination has been also examined to see the effect of the adjacent channel protection ratio caused by adjacent channel interference. In addition, the protection ratios for the space or frequency diversity system are analyzed in terms of diversity improvement factors to find out an equivalent allowable noise-to-interference ratio (N/I) from degraded fade margin. According to results for 6.2 GHz system, with the space diversity of 25 m distance between antennas or the frequency diversity of ${\Delta}f/f=0.05$, under 64-QAM and 60 km at BER $10^{-6}$, the protection ratio can be greatly reduced in comparison to the non-diversity system. So, assuming that only the same protection ratio as the non-diversity system is kept, it is shown that the system with diversity may get more interference level of N/I allowing from 9.0 to - 5.9 dB or from 6.0 to - 4.3 dB for the space or frequency diversity. In consequence, it is concluded that the diversity system is more robust or tolerable for interferences or fades, which may play an important role in overcoming N/I to some extent.

• 한국물환경학회지
• /
• 제26권1호
• /
• pp.168-176
• /
• 2010

This study proposes the improvement of the present Total Maximum Daily Load (TMDL) management system of MOE (Ministry of Environment). The margin of safety (MOS) is calculated by a method using standard error and a method using variability and uncertainty. The allocation of pollutant loads are calculated using three methods, equal load reduction method, equal percent removal method and method using equity standards. This study applied the improved TMDL management system to the Anyangcheon watershed. Since MOS varies from 12% to 44% due to the high variability of measured and simulated data, it must not be ignored in the TMDL. The method using equity standards is the most proper in this application since the others produced unrealistic allocations. Area, runoff, water use quantity, population and budget are considered for equity standards. This study shows that this allocation method can be also applicable for the administrative units as well as the sub-watersheds. Finally, Hydrologic Simulation Program-FORTRAN (HSPF) with the allocated pollutant load was used to confirm whether it satisfy the water quality standard or not. This study will be helpful to improve the MOS and allocation system TMDL in the future.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.88-92
• /
• 2009

초음속 추진기관은 기계적인 압축기를 통해 흡입공기를 압축하는 방식이 아니라 램 압축 현상을 이용하여 흡입공기를 압축하기 때문에 흡입구에서의 전압력 회복율이 초음속 추진기관 전체의 작동특성에 결정적인 영향을 주게 된다. 제어기 설계에 앞서 엔진의 동특성 해석을 수행한 결과 비행체의 받음각이 커질수록 버즈마진 값이 작아져 일부영역에서는 충격파가 흡입구 외부에서 발생하게 됨을 확인할 수 있었다. 따라서 흡입구 내의 충격파 특성이 성능요구조건을 만족할 수 있도록 버즈마진을 제어하기 위한 PID 제어알고리즘을 설계하였다. 제어변수는 연료유량과 노즐 목면적이며 버즈마진 값이 양의 값을 갖도록 PID 제어기를 설계하였다.

• 한국항행학회논문지
• /
• 제23권6호
• /
• pp.584-588
• /
• 2019

WBAN (wireless body area network)은 비정상적인 건강 상태, 실시간 의료 모니터링, 원격 의료 지원 시스템을 조기에 탐지할 수 있는 네트워킹 기술이다. 최근에 이슈가 되고 있는 건강 관리를 위한 사물 인터넷 (IoT; internet of things)은 인간의 삶의 질을 향상시키는 데 가장 유망한 분야 중에 하나이다. 이것은 다른 통신 시스템과 마찬가지로 의료 통신 시스템의 높은 QoS (quality of service)요구사항을 만족해야 한다. 따라서 WBAN 통신 시스템의 QoS 요구 사항을 수용하기 위해 오류율 (BER; bit error rate) 임계 값을 선택하였다. 본 논문에서는 IR-UWB PPM 변조 방식을 이용한 WBAN 채널의 BER 성능을 계산하고 WBAN의 링크 버짓과 시스템 마진을 다양한 시스템 파라미터에 따라 분석하였다.

• Structural Engineering and Mechanics
• /
• 제83권3호
• /
• pp.327-340
• /
• 2022

The Collapse Margin Ratio (CMR) is a notable index used for seismic assessment of the structures. As proposed by FEMA P695, a set of analyses including the Nonlinear Static Analysis (NSA), Incremental Dynamic Analysis (IDA), together with Fragility Analysis, which are typically time-taking and computationally unaffordable, need to be conducted, so that the CMR could be obtained. To address this issue and to achieve a quick and efficient method to estimate the CMR, the Artificial Neural Network (ANN), Response Surface Method (RSM), and Adaptive Neuro-Fuzzy Inference System (ANFIS) will be introduced in the current research. Accordingly, using the NSA results, an attempt was made to find a fast and efficient approach to derive the CMR. To this end, 5016 IDA analyses based on FEMA P695 methodology on 114 various Reinforced Concrete (RC) frames with 1 to 12 stories have been carried out. In this respect, five parameters have been used as the independent and desired inputs of the systems. On the other hand, the CMR is regarded as the output of the systems. Accordingly, a double hidden layer neural network with Levenberg-Marquardt training and learning algorithm was taken into account. Moreover, in the RSM approach, the quadratic system incorporating 20 parameters was implemented. Correspondingly, the Analysis of Variance (ANOVA) has been employed to discuss the results taken from the developed model. Additionally, the essential parameters and interactions are extracted, and input parameters are sorted according to their importance. Moreover, the ANFIS using Takagi-Sugeno fuzzy system was employed. Finally, all methods were compared, and the effective parameters and associated relationships were extracted. In contrast to the other approaches, the ANFIS provided the best efficiency and high accuracy with the minimum desired errors. Comparatively, it was obtained that the ANN method is more effective than the RSM and has a higher regression coefficient and lower statistical errors.

• 한국정보통신학회논문지
• /
• 제8권3호
• /
• pp.517-522
• /
• 2004

본 논문에서는 마이크로웨이브 채널 환경에서 대역제한필터(BL-PSF)를 이용하는 OFDM/QPSK-DMR 시스템의 성능개선에 관한 연구를 수행하였다. 성능개선을 위해 단일적응등화기(one-tap adaptive equalizer)를 OFDM/QPSK-DMR 시스템에 적용하였으며, 단일 반송파방식의 DMR 시스템과 BER 및 특성 곡선(signature curve) 성능을 비교분석하였다. 시뮬레이션 결과 마이크로웨이브 채널 환경에서 OFDM/QPSK-DMR 시스템에 단일적응등화기를 적용한 경우, 부 반송파의 수가 16일때 단일 반송파방식의 DMR 시스템보다 2 dB 이상의 페이드 마진을 갖는다. 그리고 OFDM/QPSK-DMR 시스템의 부 반송파의 수가 많을수록 페이드 마진이 더욱 증가하여 성능이 향상 되는 것을 알 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1571-1581
• /
• 2016

A novel method is proposed to construct the voltage stability boundary of power system considering different Reactive Power Control Mode (RPCM) of Doubly-Fed Induction Generator (DFIG) Wind Power Plant (WPP). It can be used for reflecting the static stability status of grid operation with wind power penetration. The analytical derivation work of boundary search method can expound the mechanism and parameters relationship of different WPP RPCMs. In order to improve the load margin and find a practical method to assess the voltage security of power system, the approximate method of constructing voltage stability boundary and the critical points search algorithms under different RPCMs of DFIG WPP are explored, which can provide direct and effective reference data for operators.

• 소음진동
• /
• 제7권6호
• /
• pp.1015-1023
• /
• 1997

Rotordynamic analysis of a multistage turbine pump using finite element method is performed to investigate the effects of seal wear on its system behavior. Stiffness and damping coefficents of the 2-axial grooved bearing are obtained as functions of rotating speed. Stiffness and damping coefficients of plane annuler seals are calculated as functions of rotating speed as well as seal clearance of seals become larger, these stiffness and damping coefficients decrease drastically so that there can be significant changes in whirl natural frequencies and damping characteristics of the pump rotor system. Although a pump is designed to operate with a sufficient seperation margin from the 1st critical speed, seal wear due to long operation may cause a sudden increase in vibration amplitude by resonance shift and reduce seal damping capability.