• 한국전자파학회논문지
• /
• 제13권2호
• /
• pp.115-122
• /
• 2002

본 논문에서는 고속수통방식과 능동방식 ETC 시스템간 호환의 필요성에 따라 두 시스템의 주파수 대역 호환 방안을 제안한다. 현재 TTA에서 DSRC 시스템을 능통 방식으로 표준화 작업을 진행중이다 그러므로 현재 시범운용중인 고속수통방식 ETC 시스템과 아직 미개발 상태인 능통방식 ETC 시스템간 호환의 필요성이 제기된다. 그래서 기존의 고속수동방식 ETC 시스템의 성능을 저하시키지 않으면서 능통방식과 유사한 주파수 대역을 사용학 수 있는 방안(Direct Conversion Method)을 제안하고, 시뮬레이션을 통하여 기존 방식과의 차이를 확인할 수 있었다.

• 한국자동차공학회논문집
• /
• 제15권6호
• /
• pp.9-16
• /
• 2007

This paper describes the design and implementation of the fault diagnosis on the Electronic Throttle Control(ETC) System. The proposed fault diagnosis consists of an input signal, actuator and a processor diagnosis. The input signal diagnosis can detect the faults of the ETC system's input signals such as the position sensor fault, source voltage fault, load current fault, and desired position fault. The actuator diagnosis is able to detect the actuator fault due to the actuator aging and an obstacle which interfere in the movement of the actuator. The processor diagnosis detects the fault which prevents the microprocessor from operating the ETC software. In order to protect the breakdown of the ETC system and assure the driving safety, appropriate reactions are also proposed according to the detected faults. The safety and reliability of the ETC system can be improved by the proposed fault diagnosis.

• 보건행정학회지
• /
• 제3권2호
• /
• pp.27-80
• /
• 1993

It is widely known that patients' utilization pattern for medical care facilities and the patientflow are influenced by multi-factors, such as demographic characteristics, structural characteristics of society, socio-psychological characteristics(value, attitude, norms, culture, health behavior, etc.), economic characteristics(income, medical price, relative price, physician induced demand, etc.), geographical accessibility, systematic characteristics(health care delivery system, payment methods for physician fees, form of health care security, etc.), and characteristics of medical facilities(reliability, quality of medical care, convenience, kindness, tec.). This study was conducted to research the mechanism of patient-flow according to changes of health care system(implementation of national health insurance, health care referral system and regionalization of health care utilization, etc.) and characteristics of medical facilities(ownership of hospital, characteristics of medical services, non-medical characteristics, etc.). In this study, the fact could be ascertained that the patient-flow had been influenced by changes of health care system and characteristics of medical facilities.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.637-642
• /
• 1998

This study was performed to develop effective management system of concrete structures in Nuclear Power Plants. This D/B system includes three kinds of data : 1)visual inspection data(cracking, spalling, etc.) 2) durability data carbonation, chloride attack, etc. 3) in-service inspection data(prestressing force. material properties, etc. ) By using the life management D/B System, the field engineers can easily acquire the information about the various inspection data. repair and accidental histories of structures. This system, will contribute to the efficient life management of concrete structures.

• 한국항해항만학회지
• /
• 제28권10호
• /
• pp.881-889
• /
• 2004

현재 시범 시행중인 자동요금징수(ETC: Electronic Toll Collection) 서비스는 차량 주행 중에 차량내의 자동요금징수 서비스 전용 단말기에 내장된 카드 리더 장치로부터 삽입된 스마트 카드의 정보를 읽어 과금을 결재하는 방식을 채택하고 있다. 본 논문에서는 현 ETC 시스템인 카드 리더 방식에서 발생되는 단점을 극복하고 처리하여 성능이 향상된 자동요금징수 서비스를 위하여 차량이 주행 중에 휴대폰을 이용하여 통행료를 자동으로 징수하는 시스템을 제안한다. 휴대폰을 이용한 자동요금징수 결재 시스템을 통하여 운전자는 카드리더의 이용시 발생되는 카드와 카드 리더간의 불일치로 발생될 수 있는 문제점을 극복할 수 있으며 나아가 휴대폰을 이용하여 요금을 결재함으로서 보다 능률적인 데이터 처리 및 편리한 사용자 환경을 구축하였다.

• International Journal of Advanced Culture Technology
• /
• 제11권4호
• /
• pp.263-272
• /
• 2023

We investigated and analyzed students' perceptions of their choice of science subjects in the high school credit system and the reasons for their choice. To achieve this, the selection of science subjects was investigated for the second year of S high school over the past three years. Students selected an average of 1.54 science subjects, and it was found that the rate of selection of science subjects was gradually increasing by year. Students chose high in the order of life science I, earth science I, chemistry I, physics I, etc. in the science subject group. Students who wish to enter the natural and engineering fields chose life science I, chemistry I, physics I, etc., while, students who wish to enter the humanities society chose society and culture, life science I, ethics and thought, etc. On the other hand, the reason for choosing science subjects was 'related to college admission', followed by 'aptitude and interest', 'career and real life help', etc. physics I, chemistry I, etc., were high in the subjects selected according to the 'related to college admission'. The subjects selected according to 'aptitude and interest' were high in life science I, earth science I, etc. Physics I, chemistry I, etc. are recognized as subjects necessary for college entrance, and life science I, earth science I, etc., are found to be related to their interests and aptitudes.

• 수산해양기술연구
• /
• 제32권1호
• /
• pp.33-41
• /
• 1996

In order to obtain the most favourable classification system for fishing gears, the problems in the existing systems were investigated and a new system in which the fishing method was adopted as the criterion of classification and the kinds of fishing gears were obtained by exchanging the word method into gear in the fishing methods classified newly for eliminating the problems was established. The new system to which the actual gears are arranged is as follows ; (1)Harvesting gear \circled1Plucking gears : Clamp, Tong, Wrench, etc. \circled2Sweeping gears : Push net, Coral sweep net, etc. \circled3Dredging gears : Hand dredge net, Boat dredge net, etc. (2)Sticking gears \circled1Shot sticking gears : Spear, Sharp plummet, Harpoon, etc. \circled2Pulled sticking gears : Gaff, Comb, Rake, Hook harrow, Jerking hook, etc. \circled3Left sticking gears : Rip - hook set line. (3)Angling gears \circled1Jerky angling gears (a)Single - jerky angling gears : Hand line, Pole line, etc. (b)Multiple - jerky angling gears : squid hook. \circled2Idly angling gears (a)Set angling gears : Set long line. (b)Drifted angling gears : Drift long line, Drift vertical line, etc. \circled3Dragged angling gears : Troll line. (4)Shelter gears : Eel tube, Webfoot - octopus pot, Octopus pot, etc. (5)Attracting gears : Fishing basket. (6)Cutoff gears : Wall, Screen net, Window net, etc. (7)Guiding gears \circled1Horizontally guiding gears : Triangular set net, Elliptic set net, Rectangular set net, Fish weir, etc. \circled2Vertically guiding gears : Pound net. \circled3Deeply guiding gears : Funnel net. (8)Receiving gears \circled1Jumping - fish receiving gears : Fish - receiving scoop net, Fish - receiving raft, etc. \circled2Drifting - fish receiving gears (a)Set drifting - fish receiving gears : Bamboo screen, Pillar stow net, Long stow net, etc. (b)Movable drifting - fish receiving gears : Stow net. (9)Bagging gears \circled1Drag - bagging gears (a)Bottom - drag bagging gears : Bottom otter trawl, Bottom beam trawl, Bottom pair trawl, etc. (b)Midwater - drag gagging gears : Midwater otter trawl, Midwater pair trawl, etc. (c)Surface - drag gagging gears : Anchovy drag net. \circled2Seine - bagging gears (a)Beach - seine bagging gears : Skimming scoop net, Beach seine, etc. (b)Boat - seine bagging gears : Boat seine, Danish seine, etc. \circled3Drive - bagging gears : Drive - in dustpan net, Inner drive - in net, etc. (10)Surrounding gears \circled1Incomplete surrounding gears : Lampara net, Ring net, etc. \circled2Complete surrounding gears : Purse seine, Round haul net, etc. (11)Covering gears \circled1Drop - type covering gears : Wooden cover, Lantern net, etc. \circled2Spread - type covering gears : Cast net. (12)Lifting gears \circled1Wait - lifting gears : Scoop net, Scrape net, etc. \circled2Gatherable lifting gears : Saury lift net, Anchovy lift net, etc. (13)Adherent gears \circled1Gilling gears (a)Set gilling gears : Bottom gill net, Floating gill net. (b)Drifted gilling gears : Drift gill net. (c)Encircled gilling gears : Encircled gill net. (d)Seine - gilling gears : Seining gill net. (e)Dragged gilling gears : Dragged gill net. \circled2Tangling gears (a)Set tangling gears : Double trammel net, Triple trammel net, etc. (b)Encircled tangling gears : Encircled tangle net. (c)Dragged tangling gears : Dragged tangle net. \circled3Restrainting gears (a)Drifted restrainting gears : Pocket net(Gen - type net). (b)Dragged restrainting gears : Dragged pocket net. (14)Sucking gears : Fish pumps.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.33-38
• /
• 1989

This paper is about construction of Data Acquisition System for Gyro-System which obtains the information such as position, velocity, acceleration and attitude etc of Dynamic Vehicle System. We made up the Data Acquisition System using IBM-PC and in connection with CYBER 180-830 based on rate table, controller and IEEE 488 Interface etc.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.904-909
• /
• 2011

The development of train control system shall operate a series of processes like system designing, system production and system performance evaluation as a result of various requirements analysis presented in operation rules, operating guidelines for railway organizations etc, notified by the nation. Therefore, considering operation conditions, operation plan, linkage to railway network etc, the major document like system functional specifications, system development specifications, system test plans etc must be drawn up. In this paper we classify system operating scenarios required to prepare for system standard specification and system performance evaluation report of CBTC system for urban subways supporting unmanned automatic operation, and adjust each of the operating status.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.92-99
• /
• 2008

This paper describes an signal processing method for the hall sensorless position control of ETC control system using a BLDC motor. The proposed ETC control system, which is mainly consisted of a BLDC motor, a throttle plate, a return spring and reduction gear, has a position sensor with an analog voltage output on the throttle valve instead of BLDC motor for detecting rotor position of motor. So the additional commutation information is necessarily needed to control the mentioned ETC module. In order to estimate and determine the commutation state, it is proposed to properly manipulate the resolution of A/D converter considering the mechanical parameter, that is, the number of motor slot and the ratio of reduction gear. Through this method, the estimation of commutation state for operating the system is possible and the discrete signal for commutation is stably obtained. The validity of the method is examined through the experimental results.