• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.1
• /
• pp.53-66
• /
• 1980

The research work is concerned with the analytical and experimental studies on the heat transfer phenomenon around the underground concrete digester used for biogas production Systems. A mathematical and computational method was developed to estimate heat losses from underground cylindrical concrete digester used for biogas production systems. To test its feasibility and to evaluate thermal parameters of materials related, the method was applied to six physical model digesters. The cylindrical concrete digester was taken as a physical model, to which the model,atical model of heat balance can be applied. The mathematical model was transformed by means of finite element method and used to analyze temperature distribution with respect to several boundary conditions and design parameters. The design parameters of experimental digesters were selected as; three different sizes 40cm by 80cm, 80cm by 160cm and l00cm by 200cm in diameter and height; two different levels of insulation materials-plain concrete and vermiculite mixing in concrete; and two different types of installation-underground and half-exposed. In order to carry out a particular aim of this study, the liquid within the digester was substituted by water, and its temperature was controlled in five levels-35。 C, 30。 C, 25。 C, 20。C and 15。C; and the ambient air temperature and ground temperature were checked out of the system under natural winter climate conditions. The following results were drawn from the study. 1.The analytical method, by which the estimated values of temperature distribution around a cylindrical digester were obtained, was able to be generally accepted from the comparison of the estimated values with the measured. However, the difference between the estimated and measured temperature had a trend to be considerably increased when the ambient temperature was relatively low. This was mainly related variations of input parameters including the thermal conductivity of soil, applied to the numerical analysis. Consequently, the improvement of these input data for the simulated operation of the numerical analysis is expected as an approach to obtain better refined estimation. 2.The difference between estimated and measured heat losses was shown to have the similar trend to that of temperature distribution discussed above. 3.It was found that a map of isothermal lines drawn from the estimated temperature distribution was very useful for a general observation of the direction and rate of heat transfer within the boundary. From this analysis, it was interpreted that most of heat losses is passed through the triangular section bounded within 45 degrees toward the wall at the bottom edge of the digesten Therefore, any effective insulation should be considered within this region. 4.It was verified by experiment that heat loss per unit volume of liquid was reduced as the size of the digester became larger For instance, at the liquid temperature of 35˚ C, the heat loss per unit volume from the 0. 1m$^3$ digester was 1, 050 Kcal/hr m$^3$, while at for 1. 57m$^3$ digester was 150 Kcal/hr m$^3$. 5.In the light of insulation, the vermiculite concrete was consistently shown to be superior to the plain concrete. At the liquid temperature ranging from 15。 C to 350 C, the reduction of heat loss was ranged from 5% to 25% for the half-exposed digester, while from 10% to 28% for the fully underground digester. 6.In the comparison of heat loss between the half-exposed and underground digesters, the heat loss from the former was fr6m 1,6 to 2, 6 times as much as that from the latter. This leads to the evidence that the underground digester takes advantage of heat conservation during winter.

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.279-292
• /
• 2011

Movie is a representative media that can transmit stories to audiences. Basically, a story is described by characters in the movie. Different from other simple videos, movies deploy narrative structures for explaining various conflicts or collaborations between characters. These narrative structures consist of 3 main acts, which are beginning, middle, and ending. The beginning act includes 1) introduction to main characters and backgrounds, and 2) conflicts implication and clues for incidents. The middle act describes the events developed by both inside and outside factors and the story dramatic tension heighten. Finally, in the end act, the events are developed are resolved, and the topic of story and message of writer are transmitted. When story information is extracted from movie, it is needed to consider that it has different weights by narrative structure. Namely, when some information is extracted, it has a different influence to story deployment depending on where it locates at the beginning, middle and end acts. The beginning act is the part that exposes to audiences for story set-up various information such as setting of characters and depiction of backgrounds. And thus, it is necessary to extract much kind information from the beginning act in order to abstract a movie or retrieve character information. Thereby, this paper proposes a novel method for extracting the beginning boundaries. It is the method that detects a boundary scene between the beginning act and middle using the accumulation graph of characters. The beginning act consists of the scenes that introduce important characters, imply the conflict relationship between them, and suggest clues to resolve troubles. First, a scene that the new important characters don't appear any more should be detected in order to extract a scene completed the introduction of them. The important characters mean the major and minor characters, which can be dealt as important characters since they lead story progression. Extra should be excluded in order to extract a scene completed the introduction of important characters in the accumulation graph of characters. Extra means the characters that appear only several scenes. Second, the inflection point is detected in the accumulation graph of characters. It is the point that the increasing line changes to horizontal line. Namely, when the slope of line keeps zero during long scenes, starting point of this line with zero slope becomes the inflection point. Inflection point will be detected in the accumulation graph of characters without extra. Third, several scenes are considered as additional story progression such as conflicts implication and clues suggestion. Actually, movie story can arrive at a scene located between beginning act and middle when additional several scenes are elapsed after the introduction of important characters. We will decide the ratio of additional scenes for total scenes by experiment in order to detect this scene. The ratio of additional scenes is gained as 7.67% by experiment. It is the story inflection point to change from beginning to middle act when this ratio is added to the inflection point of graph. Our proposed method consists of these three steps. We selected 10 movies for experiment and evaluation. These movies consisted of various genres. By measuring the accuracy of boundary detection experiment, we have shown that the proposed method is more efficient.

• Journal of the Korean earth science society
• /
• v.32 no.3
• /
• pp.276-293
• /
• 2011

In this study a modeling system consisting of Weather Research and Forecasting (WRF), Sparse Matrix Operator Kernel Emissions (SMOKE), the Community Multiscale Air Quality (CMAQ) model, and the CMAQ-Model of Aerosol Dynamics, Reaction, Ionization, and Dissolution (MADRID) model has been applied to estimate enhancements of $PM_{10}$ during Asian dust events in Korea. In particular, 5 experimental formulas were applied to the WRF-SMOKE-CMAQ (MADRID) model to estimate Asian dust emissions from source locations for major Asian dust events in China and Mongolia: the US Environmental Protection Agency (EPA) model, the Goddard Global Ozone Chemistry Aerosol Radiation and Transport (GOCART) model, and the Dust Entrainment and Deposition (DEAD) model, as well as formulas by Park and In (2003), and Wang et al. (2000). According to the weather map, backward trajectory and satellite image analyses, Asian dust is generated by a strong downwind associated with the upper trough from a stagnation wave due to development of the upper jet stream, and transport of Asian dust to Korea shows up behind a surface front related to the cut-off low (known as comma type cloud) in satellite images. In the WRF-SMOKE-CMAQ modeling to estimate the PM10 concentration, Wang et al.'s experimental formula was depicted well in the temporal and spatial distribution of Asian dusts, and the GOCART model was low in mean bias errors and root mean square errors. Also, in the vertical profile analysis of Asian dusts using Wang et al's experimental formula, strong Asian dust with a concentration of more than $800\;{\mu}g/m^3$ for the period of March 31 to April 1, 2007 was transported under the boundary layer (about 1 km high), and weak Asian dust with a concentration of less than $400\;{\mu}g/m^3$ for the period of 16-17 March 2009 was transported above the boundary layer (about 1-3 km high). Furthermore, the difference between the CMAQ model and the CMAQ-MADRID model for the period of March 31 to April 1, 2007, in terms of PM10 concentration, was seen to be large in the East Asia area: the CMAQ-MADRID model showed the concentration to be about $25\;{\mu}g/m^3$ higher than the CMAQ model. In addition, the $PM_{10}$ concentration removed by the cloud liquid phase mechanism within the CMAQ-MADRID model was shown in the maximum $15\;{\mu}g/m^3$ in the Eastern Asia area.

• Economic and Environmental Geology
• /
• v.50 no.6
• /
• pp.477-486
• /
• 2017

In this study, we analyze precise seabed geomorphology and conditions for comparing the nearshore areas of the Dongdo(East Island) and the Seodo(West Island) using detailed bathymetry data and seafloor backscattering images, in Dokdo, the East Sea. We have been obtained the detailed bathymetry data and the seafloor backscattering data. The survey range is about $250m{\times}250m$ including land of islets to the nearshore areas of the southern part of the Dongdo and the Seodo. As a result of bathymetry survey, the southern area of the Dongdo(~50 m) is deeper than the Seodo(~30 m) in the water depth. The survey areas are consist of extended bedrocks from land of the Dongdo and the Seodo. The underwater rock region of the Seodo is larger than the Dongdo. In spite of similar extended rocks features from islets, there are some distinctive seabed characteristics between the southern nearshore areas of the Dongdo and the Seodo. The Talus-shaped seafloor environment formed by gravel and underwater rocks originating from the land of the Dongdo is up to about 15 m depth. And the boundary line of between extended bedrocks and seabottom is unclear in the southern nearshore of the Dongdo. On the other hand, the southern coast of the Seodo is characterized by relatively large scale underwater rocks and evenly distributed sediments, which clearly distinguish the boundary of between extended bedrocks and seafloor. This is because the tuff layers exposed to the coastal cliffs of the Dongdo are weak against weathering and erosion. It is considered that there are more influences of the clastic sediments carried from the land of the Dongdo compared with the Seodo. Particularly, the land of the Dongdo has been undergoing construction activities. And also a highly unstable ground such as faults, joints and cracks appears in the Dongdo. In previous study, there are dissimilar features of the massive tuff breccia formations of the Dongdo and the Seodo. These conditions are thought to have influenced the different seabed characteristics in the southern nearshore areas of the Dongdo and the Seodo.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.667-678
• /
• 2002

In this paper, a new radiating structure with a multi-layered two-dimensional metallic disk array was proposed for shaping the flat-topped element pattern. It is an infinite periodic planar array structure with metallic disks finitely stacked above the radiating circular waveguide apertures. The theoretical analysis was in detail performed using rigid full-wave analysis, and was based on modal representations for the fields in the partial regions of the array structure and for the currents on the metallic disks. The final system of linear algebraic equations was derived using the orthogonal property of vector wave functions, mode-matching method, boundary conditions and Galerkin's method, and also their unknown modal coefficients needed for calculation of the array characteristics were determined by Gauss elimination method. The application of the algorithm was demonstrated in an array design for shaping the flat-topped element patterns of $\pm$20$^{\circ}$ beam width in Ka-band. The optimal design parameters normalized by a wavelength for general applications are presented, which are obtained through optimization process on the basis of simulation and design experience. A Ka-band experimental breadboard with symmetric nineteen elements was fabricated to compare simulation results with experimental results. The metallic disks array structure stacked above the radiating circular waveguide apertures was realized using ion-beam deposition method on thin polymer films. It was shown that the calculated and measured element patterns of the breadboard were in very close agreement within the beam scanning range. The result analysis for side lobe and grating lobe was done, and also a blindness phenomenon was discussed, which may cause by multi-layered metallic disk structure at the broadside. Input VSWR of the breadboard was less than 1.14, and its gains measured at 29.0 GHz. 29.5 GHz and 30 GHz were 10.2 dB, 10.0 dB and 10.7 dB, respectively. The experimental and simulation results showed that the proposed multi-layered metallic disk array structure could shape the efficient flat-topped element pattern.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.1
• /
• pp.120-128
• /
• 2018

The purpose of this study is to establish basic data for the continuous protection management policy of domestic natural world heritage and mixed world heritage, and to examine the present situation and characteristics of the protection management according to the World Heritage Convention on the World Heritage listed Huangshan. The results of this study are as follows. First, Huangshan began to be protected by the establishment of the Huangshan Construction Committee in 1933, and after the designation of national park in 1982, laws and regulations were established in the central ministries, And various projects related to utilization have been implemented. Secondly, the establishment of the boundary for protection was actively intervened by the central government, such as the reorganization of the boundary of Huangshan through the administrative district plan. In order to protect the ecological and landscape value as well as the cultural factor, And designated a heritage designated area. Third, the protection management of Huangshan was divided into four major stages. The first phase was divided into the period when administrative measures were taken to manage the protection of Huangshan. The second phase was designated as a national park in Huangshan. The third period was the time of the protection-oriented project according to the recommendation of the international organizations after the World Heritage listed. The fourth period was the expansion of the tourism industry for the continuous use of protection of Huangshan city, My preservation business was being implemented. Fourth, Huangshan is managed by the central government and the city government. Huangshan, which is a mixed heritage, is managed jointly by the Ministry of Cultural Heritage Administration and the Ministry of Natural Heritage Administration. The protection and management of Huangshan promoted the efficiency and expertise of the heritage-related work through the establishment of the administrative unit-specific management system, and the local governments were entrusted with the authority to implement the protection management policies that meet local characteristics. Fifth, the preservation area of Huangshan has been destroyed by the development policy centered on the mountain. In addition, according to the operation of accommodation facilities, there are problems such as sewage, garbage disposal, and environmental pollution caused by tourists, and the damage caused by pests and diseases in planted plantations around the area and changes in ecosystem due to the composition of cable cars. Sixth, for the continuous protection of Huangshan, strict regulations on new construction, extension and management of accommodation are required, and it is necessary to install facilities to limit and control the number of visitors.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.4
• /
• pp.227-235
• /
• 2005

This study aimed at suggesting management policy directions for the uninhabited islands of Korea which are national land resources with economic potential for tourism and development and strategic value for boundary delineation of territorial waters and exclusive economic zone as well as their unique ecological status. Review of existing management arrangements related to the uninhabited islands revealed six management issues to be addressed: insufficient data and their low reliability, lack of management policy directions, increase in ecosystem deterioration and perturbation by human activities, lack of policy measures for meeting utilization and development demands, weak management base with insufficient personnel and budget, and legal measures not taking Into account their unique ecological and socioeconomic characteristics. The management policy directions to improve the management of the uninhabited islands of Korea include management directions and strategies, and suggestions for legal improvement. Considering the unique ecological value of the uninhabited islands, management directions suggested are anti-degradation in which current and future demands for their utilization and development do not degrade the ecological potential of the uninhabited islands and integration in which land and sea areas are managed as an integrated management unit. Four strategies proposed to follow the management directions are enhancement of the knowledge base through a comprehensive survey, development and legislation of guidelines for the rational management of utilization and development demands, establishment of the comprehensive island debris collection and disposal system, and enhancement of management capacity. Legal improvement for the effective implementation of the management policy directions should include comprehensive uninhabited islands survey, legal utilization restraints and management guidelines based on classification of the islands, management boundary, and improvement of regulations on designated islands.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.5
• /
• pp.393-398
• /
• 2009

This study was conducted to reclassify Yongdang series based on the second edition of Soil Taxonomy : A Basic System of Soil Classification for Making and Interpreting Soil Surveys. Morphological properties of typifying pedon of Yongdang series were investigated and physico-chemical properties were analyzed according to Soil Survey Laboratory Methods Manual. The typifying pedon of Yongdang series has dark reddish brown (5YR 2/3) silt loam Ap horizon (0~14 cm), dark brown (7.5YR 2/3) silt loam BA horizon (14~32 cm), dark brown (7.5YR 2/3) clay loam Bt horizon (32~57 cm), dark yellowish brown (10YR 4/6) silty clay loam Btx1 horizon (57~110 cm), and dark yellowish brown (10YR 4/6) silty clay loam Btx2 horizon(more than 110 cm). That occurs on gently sloping lava plain and is derived from baslt materials. The typifying pedon has an argillic horizon from a depth of 32 to more than 110 cm and a fragipan from a depth of 57 to more than 110 cm. That has a base saturation (sum of cations) of 35% or more at 75 cm below the upper boundary of the fragipan. That can be classified as Alfisol, not as Inceptisol. The typifying pedon has udic soil moisture regime, and can be classified as Udalf. That has a fragipan with an upper boundary within 100 cm of the mineral soil surface, and keys out as Fragiudalf. Also that meets the requirements of Typic Fragiudalf. That has 18% to 35% clay at the particle-size control section, and has thermic soil temperature regime. Yongdang series can be classified as fine loamy, mixed, thermic family of Typic Fragiudalfs, not as fine loamy, mixed, thermic family of Aquic Eutrudepts.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.7
• /
• pp.987-994
• /
• 2021

The Yellow sea, as described in article 123 of UNCLOS, is semi-enclosed sea surrounded by the Republic of Korea, the People's Republic of China and North Korea. In addition, the Yellow Sea is one of the 66 large marine ecosystems as it contains large amounts of marine resources. According to article 194 of UNCLOS, states should be aware of rights and duties with respect to the protection and preservation of the marine environment to be engaged with countries directly as regional entity or indirectly. Therefore, the legal blank is urgent in terms of trans-boundary environmental pollutant issues. The UNDP has conducted a project called Yellow Sea Large Marine Ecosystem (YSLME) which has reached the 2^nd phase. The project has some notable achievements, namely performing joint activities on analysis of diagnostic trans-boundary issues in collaboration with China and South Korea, developing a strategic action plan based on TDA, and establishing regional strategic action plan. However, on the other hand, the project could not reflect the full participation of North Korea as a state party. As a result, the project has a limitation on effective implementation of RSAP. Therefore, this study focuses on the suggestion of a legally-binding trilateral treaty as a blue print for the next, 3^rd phase of the project. By analyzing the best practice of the Wadden Sea Trilateral Treaty case, the study verifies the validity of legislative measures on establishing and managing a legally-binding trilateral YSLME Commission. By suggesting a three phase treaty, incorporating a joint declaration by establishing the commission, the signing of the treaty, and formulating an umbrella convention and implementation arrangement, the study expects to guarantee the consistency and sustainability of the trilateral treaty regardless of political issues pertaining to North Korea.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1195-1206
• /
• 2011

This study was conducted to apply LCA (Life cycle assessment) methodology to lettuce (Lactuca sativa L.) production systems in Namyang-ju as a case study. Five lettuce growing farms with three different farming systems (two farms with organic farming system, one farm with a system without agricultural chemicals and two farms with conventional farming system) were selected at Namyangju city of Gyeonggi-province in Korea. The input data for LCA were collected by interviewing with the farmers. The system boundary was set at a cropping season without heating and cooling system for reducing uncertainties in data collection and calculation. Sensitivity analysis was carried out to find out the effect of type and amount of fertilizer and energy use on GHG (Greenhouse Gas) emission. The results of establishing GTG (Gate-to-Gate) inventory revealed that the quantity of fertilizer and energy input had the largest value in producing 1 kg lettuce, the amount of pesticide input the smallest. The amount of electricity input was the largest in all farms except farm 1 which purchased seedlings from outside. The quantity of direct field emission of $CO_2$, $CH_4$ and $N_2O$ from farm 1 to farm 5 were 6.79E-03 (farm 1), 8.10E-03 (farm 2), 1.82E-02 (farm 3), 7.51E-02 (farm 4) and 1.61E-02 (farm 5) kg $kg^{-1}$ lettuce, respectively. According to the result of LCI analysis focused on GHG, it was observed that $CO_2$ emission was 2.92E-01 (farm 1), 3.76E-01 (farm 2), 4.11E-01 (farm 3), 9.40E-01 (farm 4) and $5.37E-01kg\;CO_2\;kg^{-1}\;lettuce$ (farm 5), respectively. Carbon dioxide contribute to the most GHG emission. Carbon dioxide was mainly emitted in the process of energy production, which occupied 67~91% of $CO_2$ emission from every production process from 5 farms. Due to higher proportion of $CO_2$ emission from production of compound fertilizer in conventional crop system, conventional crop system had lower proportion of $CO_2$ emission from energy production than organic crop system did. With increasing inorganic fertilizer input, the process of lettuce cultivation covered higher proportion in $N_2O$ emission. Therefore, farms 1 and 2 covered 87% of total $N_2O$ emission; and farm 3 covered 64%. The carbon footprints from farm 1 to farm 5 were 3.40E-01 (farm 1), 4.31E-01 (farm 2), 5.32E-01 (farm 3), 1.08E+00 (farm 4) and 6.14E-01 (farm 5) kg $CO_2$-eq. $kg^{-1}$ lettuce, respectively. Results of sensitivity analysis revealed the soybean meal was the most sensitive among 4 types of fertilizer. The value of compound fertilizer was the least sensitive among every fertilizer imput. Electricity showed the largest sensitivity on $CO_2$ emission. However, the value of $N_2O$ variation was almost zero.