• ETRI Journal
• /
• v.46 no.3
• /
• pp.432-445
• /
• 2024

This paper demonstrates improved throughput and energy efficiency of wireless communications by exploiting nonorthogonal multiple access (NOMA), multiple input-multiple output (MIMO), and radio frequency energy harvesting (EH) technologies. To assess the performance of NOMA MIMO communications with EH (MMe), we consider the nonlinear characteristics of EH devices and propose explicit expressions for throughput and outage probability. Based on our results, the system performance is significantly mitigated by EH nonlinearity and is considerably improved by increasing the number of antennas. Additionally, by appropriately adjusting the system parameters, our NOMA MMe innovation can avert complete outages while optimizing system performance. Moreover, the results demonstrate the superiority of the NOMA MMe over its orthogonal multiple access MMe counterparts.

• Journal of the Korean Vacuum Society
• /
• v.18 no.6
• /
• pp.411-417
• /
• 2009

The constant volume flow meter system (the chamber volume in the 22 L class) was developed to estimate the pumping speed of the dry pump used for the industry of the next generation semiconductor and display. In order to insure the validity of the system, The base pressure and the leak rate in the enclosed system were checked, which were the $6{\times}10^{-8}\;mbar$ and $1.5{\times}10^{-6}\;mbar-L/s$, respectively. Furthermore, it is also confirmed that the value of throughput limit in this system was as much as 1 order of magnitude lower than that in a previously developed system in the 875 L class. By using this developed system, the pumping speed of the new small dry pump was measured. It is believed that the new developed system can be alternating the expensive constant pressure flow meter system in the range of $1{\times}10^{-2}\;mbar-L/s{\sim}1{\times}10^{-3}\;mbar-L/s$.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2008.10a
• /
• pp.267-284
• /
• 2008

Consider a supply chain where products are produced at a manufacturing system, shipped to a distribution center, and then supplied to customers. The distribution center controls inventory based on a base-stock policy, and whenever a unit of product is demanded by a customer, an order is released to the production system. Unsatisfied demand is backordered, and the inventory and backordered units are a function of the base-stock level. The manufacturing system is modeled as an M/M/s/c queueing system, and orders exceeding the limited buffer capacity are blocked and lost. The throughput of the manufacturing system and the steady state distribution of the outstanding orders are functions of number of servers and buffers of the manufacturing system. There is a profit obtained from throughput and costs due to servers and buffers of the manufacturing system, and also costs due to inventory positions of the distribution center, and we want to maximize the total production profit minus the total cost of the supply chain by simultaneously determining the optimal number of servers and buffers of the manufacturing system and the optimal base-stock level of the distribution center. We develope two algorithms, one analytical but without guarantee of the optimal solution and one optimal but without complete analytical proofs. The problem integrates strategic problem of the manufacturing system with tactical problem of the distribution center in a supply chain.

• Journal of Advanced Navigation Technology
• /
• v.11 no.3
• /
• pp.281-287
• /
• 2007

The Bluetooth technology represents an attractive approach to enable short distance wireless connectivity. The Bluetooth standard operates at the 2.4 GHz ISM band and offers the advantage of establishing ad hoc networks, called piconet and scatternet. The spread of Bluetooth implementation in consumer products opens up a new short range wireless networking applications. Bluetooth MAC avoids packet collision within a piconet by simple time multiplexing. But lack of synchronization among independent neighboring piconets introduces packet overlapping within a time slot. In this paper, the wireless network throughput of Bluetooth packet transmission system applying the pure-ALOHA and slotted-ALOHA MAC is investigated according to the impact of channel environment. From the obtained results, the throughput of the Bluetooth MAC protocol shown to offer good performance in wireless channel, and the results are useful for the implementation of Bluetooth networks.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.6
• /
• pp.567-574
• /
• 2003

It is important to design and evaluate the chip waveform with the minimum MAI under the bandwidth constraint in the interference-limited DS-CDMA system. In this paper, by approximation we present the analytical chip waveforms that are proposed and optimized in the reference. Their performances are compared with performances of three conventional chip waveforms: rectangular, half-sine and raised-cosine. Waveform 1 of the proposed chip waveform outperforms the conventional ones. BER and throughput performance are evaluated in the Rayleigh and Nakagami-m fading channels when DPSK modulation is used. When the required BER is 10$\^$-3/ in two fading channels, the capacity of the waveform 1 is improved about 20 % rather than raised-cosine one. When the offered traffic is 30 and the number of packet per bit(N$\sub$d/) is 14, maximum throughput of the waveform 1 is better than raised-cosine chip waveform about 18 % in two fading channels.

• Journal of Satellite, Information and Communications
• /
• v.3 no.1
• /
• pp.8-14
• /
• 2008

In this paper, we analyze throughput performance of MF-TDMA scheme and QS MC-DS/CDMA(quasi-synchronous MC-DS/CDMA) scheme based on scrambling on WH sequence and PPGC sequence in early frequency offset caused by high speed transfer terminal. QS MC-DS/CDMA scheme with scrambled WH sequence shows 5.7% higher throughput than MF-TDMA scheme and 8% higher throughput than QS MC-DS/CDMA with PPGC sequence in high speed transfer terminal environment such as maximum 1000Km/h speed with high frequency of Ka-band. Finally, we show that QS MC-DS/CDMA scheme with scrambled WH sequence is more efficient than traditional MF-TDMA scheme at the aspect of throughput in DVB-RCS system with Ka frequency band.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5B
• /
• pp.338-347
• /
• 2012

In this paper, we propose the cooperative transmission scheme (CTS) for system throughput maximization in OFDMA based enterprise femtocell networks. In our scheme, the user equipment (UE) can receive the desired signal from serving femtocell BS (fBS) as well as an adjacent fBS. Thus, UE achieves an improved signal to interference plus and noise ratio (SINR) by the synchronized two signals. The performances of this strategy consider not only the call-level quality of service (QoS) but also the packet-level QoS. We first measure the call blocking probability and utilization for the downlink resources for various offered load in femtocell. Based on that, the outage probability and effective throughput of the system are simulated. Simulation results show that the proposed scheme can reduce the outage probability for enterprise femtocell compared with conventional systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.505-516
• /
• 2012

According to distribute of resource of macro cell and reduce distance between transmitter and receiver, Femto cell system is promising to provide costeffective strategy for high data traffic and high spectral efficient services in future wireless cellular system environment. However, the co-channel operation with existing Macro networks occurs some severe interference between Macro and Femto cells. Hence, the interference cancellation or management schemes are imperative between Macro and Femto cells in order to avoid the decrease of total cell throughput. First, we briefly investigate the conventional resource allocation and interference cancellation scheme between Macro and Femto cells. So we found that cell throughput and frequency reuse ware decreased Then, we propose an adaptive resource allocation scheme based on the distribution of Femtocell traffic in order to increase the cell throughput and also maximize the spectral efficiency over the FFR (Fractional Frequency Reuse) based conventional resource allocation schemes. Simulation Results show that the proposed scheme attains a bit similar SINR (Signal to Interference Noise Ratio) distribution but achieves much higher total cell throughput performance distribution over the conventional resource allocation schemes for FFR and future IEEE 802.16m based Femtocell network environment.

• Journal of Internet Computing and Services
• /
• v.4 no.5
• /
• pp.1-9
• /
• 2003

In this paper, we combine AMC (Adaptive Modulation and Coding) with MIMO (Multiple Input Multiple Output) multiplexing to improve the throughput performance of AMC in Next Generation Communication Mobile Systems. In addition, we propose a system that adopts STD (Selection Transmit Diversity) in the combined system. The received SNR (Signal to Noise Ratio) is improved by adopting STD techniques and an improved SNR increases a probability of selecting MCS (Modulation and Coding Scheme) level that supports higher data rate. The computer simulation is performed in flat Rayleigh fading channel. The results show that higher throughput is achieved by AMC-TD schemes. AMC-STTD scheme shows about 250kbps increase in throughput. And AMC-STD with 2 transmit antennas achieves about 420 kbps throughput improvement over the conventional AMC at 9dB SNR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10A
• /
• pp.780-787
• /
• 2003

Adaptive modulation is the method to increase the throughput of the mobile system using the power margin of the system design. In this paper, we propose the method to change adaptive modulation parameters for the stable system operation by monitoring the mobility of the mobile station. The proposed method measures the instanteneous mobility of the mobile station monitoring the closed power control data. The MPSK modulation method is used for the basic modulation method because of the hardware implementation. Using the proposed method we can get the more powerful throughput. By the system simulation to verify the evaluation of the proposed algorithm, we can notice the algorithm is more efficient than the typical method