• Food Science and Preservation
• /
• v.23 no.1
• /
• pp.104-109
• /
• 2016

The purpose of this study was to evaluate the inhibitory effect of commercial Makgeolli on tumor growth in human gastric adenocarcinoma cells (AGS) in a xenograft cancer model, transplanted with AGS cells. Commercial Makgeolli was first dealcoholized by evaporation and used as the test sample. We detected a significant increase in the volume and weight of tumor in nude mice (induction) that were transplanted with AGS cells. Administration of $100mg/kg{\cdot}day$ group (ML), and $500mg/kg{\cdot}day$ group (MH) dealcoholized commercial Makgeolli significantly decreased tumor growth. In this study, 5-FU $18mg/kg{\cdot}day$ was used as a positive control for tumor growth inhibition. Additionally, determination of the body weight of both the groups revealed no side effects after the administration of dealcoholized commercial Makgeolli. Using the cell culture system, we also evaluated the effect of dealcoholized commercial Makgeolli on caspase-3/7 activity in the AGS cells. Treatment with dealcoholized commercial Makgeolli increased the activation of caspase-3/7 and the apoptotic markers in AGS cells in a dose-dependent manner. Therefore, dealcoholized commercial Makgeolli can be used for cancer prevention.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.1
• /
• pp.65-70
• /
• 2010

The distillation rate on LiCl-KCl eutectic salt under different vacuums from 0.5-50 mmHg was first investigated by using both a non-isothermal and a isothermal thermogravimetric (TG) analysis. Based on the non-isothermal TG data, distillation rate equations as a function of the temperature could be derived. Calculated flux by these model flux equations was in agreement with the distillation rate obtained from isothermal TG analysis. A distillation rate of $10^{-4}-10^{-5}$ mole $cm^{-2}sec^{-1}$ is obtainable at temperatures less than 1300K and vacuums of 0.5-50 mmHg. About a 99% salt distillation efficiency was obtained after an hour at a temperature above 1150 K under 50 mmHg in a small scale distillation test system. An increase in the vaporizing surface area is relatively effective for removing residual salt in the remaining particles, when compared to that for the vaporizing time. Over 99.95% of total distillation efficiency was obtained for a 1-h distillation operation by increasing the inner surface area from $4.52cm^2$ to $12.56cm^2$.

• Journal of Distribution Science
• /
• v.11 no.1
• /
• pp.45-53
• /
• 2013

Purpose - The environment-friendly agricultural product market in Korea sees continual high growth. Recently, the Korean government has been actively fostering environment-friendly agriculture as an engine of future growth. Korean people have increasingly become more health-conscious and interested in food safety issues. Many distribution and retailing companies have responded with various promotional activities. However, most of these are not strategic and appear to have unsatisfactory outcomes. The main purpose of this paper is to suggest effective marketing strategies for environment-friendly agricultural products. To achieve this aim, the study empirically investigates the effects of consumer characteristics and trust on the purchase intention of environment-friendly agricultural products. Research design, data, methodology - Based on the theory of planned behavior, and previous studies related to the purchase intention and consumption of environment-friendly agricultural products, we set up five study hypotheses. These related to the demographic characteristics of consumers, purchase intention, and behavior of the products. We then set up a study model and four study hypotheses relating to health consciousness, environmental consciousness, consumer trust level, purchase intention, and behavior of the products. The data were collected using a questionnaire given to consumers living in Seoul and southern Geonggi Province. The final sample size is 403 and mean age is 44.3. SPSS 15.0 for Windows and Amos 7.0 were used as statistical analysis tools. Meaningful results were derived using frequency analysis, correlation analysis, a t-test, and structural equation modeling. Results - Empirical results of this research are as follows. (1) First, it is shown that consumers consider such attributes as intimacy and health to be important when they buy environment-friendly agricultural products. (2) We also found that consumers recognize the value of environment-friendly agricultural products as high, but their trust level as low. (3) Consumer groups consisting of married couples, with higher education, higher income, and higher age are shown to have a higher intention of buying environment-friendly agricultural products than any other consumer group. (4) It is estimated that the level of consumer trust positively affects the purchase intention of environment-friendly agricultural products. The path coefficient (.138) between consumer trust and purchase intention is statistically significant at the α = .05 level. (5). It is also estimated that environmental consciousness positively affects purchase intention. The path coefficient (.245) between environmental consciousness and purchase intention is statistically significant at the α = 0.05 level. The standardized path coefficients of consumer trust and environmental consciousness with purchase intention are .556 and .288 respectively. Therefore, consumer trust affects purchase intention more than environmental consciousness. (6) Finally, purchase intention is estimated to positively affect purchase behavior. Conclusions - Based upon empirical results, this research suggests that marketers of environment-friendly agricultural products should focus more on increasing consumer trust levels, emphasizing the training and education of employees. The government also should pay attention to a standardized certification system for environment-friendly agricultural products. Marketers of environment-friendly agricultural products should consider the consumer groups of married couples, with higher education, higher income, and higher age as a major target segment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.7
• /
• pp.1058-1063
• /
• 2015

The feasibility of incorporating black sesame powder (BSP) as a value-added food ingredient into bakery products was investigated using a cookie model system. BSP was incorporated into cookies at different content: 0%, 2%, 4%, 6%, and 8% (w/w) based on the total weight of wheat flour. The spread ratio and loss rate of cookies increased significantly with increasing levels of BSP (P<0.05). All color characteristics, including lightness ($L^*$), redness ($a^*$), and yellowness ($b^*$), decreased with a higher amount of BSP. Use of BSP significantly reduced the hardness of cookies (P<0.05), but no significant differences were found between the control and 2%, 4%, and 6% samples (P>0.05). 2,2-Diphenyl-1-picrylhydrazyl and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) radical scavenging activities increased significantly (P<0.05). The consumer acceptance test indicated that addition of BSP up to 4% had a favorable effect on consumer preferences. Overall, cookies containing 4% BSP will add the advantage of the functional properties of BSP maintaining the consumer acceptability.

• Journal of Integrative Natural Science
• /
• v.4 no.2
• /
• pp.149-157
• /
• 2011

Urbanization of the world's population has given rise to more than 450 cities around the world with populations in excess of 1 million (megacity) and more than 25 so-called metacities with populations over 10 million (Brinkhoff, 2010). The United States today has a total resident population of more than 308,500,000 people, with 81 percent residing in cities and suburbs as of mid - 2005 (UN, 2008). Urban meteorology is the study of the physics, dynamics, and chemistry of the interactions of Earth's atmosphere and the urban built environment, and the provision of meteorological services to the populations and institutions of metropolitan areas. While the details of such services are dependent on the location and the synoptic climatology of each city, there are common themes, such as enhancing quality of life and responding to emergencies. Experience elsewhere (e.g., Shanghai, Helsinki, Tokyo, Seoul, etc.) shows urban meteorological support is a key part of an integrated or multi-hazard warning system that considers the full range of environmental challenges and provides a unified response from municipal leaders. Urban meteorology has come to require much more than observing and forecasting the weather of our cities and metropolitan areas. Forecast improvement as a function of more and better observations of various kinds and as a function of model resolution, larger ensembles, predicted probability distributions; Responses of emergency managers, government officials, and users to improved and probabilistic forecasts; Benefits of improved forecasts in reduction of loss of life, property damage, and other adverse effects. A national initiative to enhance urban meteorological services is a high-priority need for a wide variety of stakeholders, including the general, commerce and industry, and all levels of government. Some of the activities of such an initiative include: conducting basic research and development; prototyping and other activities to enable very--short and short range predictions; supporting and improving productivity and efficiency in commercial and industrial sectors; and urban planning for long term sustainability. In addition urban test-beds are an effective means for developing, testing, and fostering the necessary basic and applied meteorological and socioeconomic research, and transitioning research findings to operations. An extended, multi-year period of continuous effort, punctuated with intensive observing and forecasting periods, is envisioned.

• Journal of National Security and Military Science
• /
• s.5
• /
• pp.241-280
• /
• 2007

This study examines the relationship of the industry-specific factors that effect innovation of manufacturing technology and the market share within the defense industry. Since the establishment of the basic defense industry framework in 1973, there were numerous interactions of the industry-specific factors of the defense industry structure with the technological innovation and market organization of the defense industry. During last three decades, the domestic defense industry has achieved the considerable level but the framework of the basic system has not developed much in areas of the military science and the defense manufacturing technology. Industry-specific factors were formed in the process and appeared in a variety of behavioral characteristics as subsystems. Currently, there IS a growing trend where the management of defense industry is gradually deteriorating due to limitation of the domestic industry-specific factor (e.g. defense technologies, amount of demand, etc.). If there is a prominent imbalance of the industry-specific factors. it can trigger the potential problem of conflict, lack of cooperation and control, slowing the growth of the manufacturing technology thereby diminishing the market and deteriorating the defense supply/demand relationship. In a research conducted by Joe S. Bain, Bain analyzed the relationship of the traditional industrial organization where industry-specific factor(S) not only impacts the conductor(C). And, conductor(C) influences the shaping of the performance(P) of relationship of the traditional industrial organization. Consequently, the researcher has identified the demand monopoly, barriers to entry, and market competition with comparison of defense industry issues. These defense issues were three industry-specific factors identified, which are 1) The demand monopoly and The entry barriers to new market competition, 2) the industrial technical factor to a production technical competitiveness and a market sharing competitiveness, 3) the probability factor to revolution for military affairs(RMA) and a R&D production. According to baseline with these factors, the following research model is established from the special companies group(Group A), the systematization companies group(Group B), and the general companies group(Group 0. The hypothesis is that if there are more industry-specific factors, then there will be more relationships of defense industry relation statutes. This research is an empirical study on the relationship that the industry specific factors effects the innovation of manufacturing technology and the shaping of the market in the defense industry. Moreover, the existing models to evaluate the industry specific factors of the defense industry IS much to be desired with the controlled statistical analysis of the result. It is vital to study on current situation with suggesting alternative strategy to the efficient strategy. The descriptive analysis approach analysis is conducted with SPSSWIN to conduct reliability test, factor analysis, correlation analysis, cross-tabulation analysis, one-way ANOVA, and multiple regression analysis. However, there were some limitations of the survey such as the rigidity of concept about the technical factors and various market management factors. The wishes is that the decision-maker could be utilized these defence industrial factors to formulate efficient defence policy and strategy in the future.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.5 no.3
• /
• pp.149-158
• /
• 2005

This paper describes design, fabrication, and application of the silicon based temperature controllable micro reactor. In order to achieve fast temperature variation and low energy consumption, reaction chamber of the micro reactor was thermally isolated by etching the highly conductive silicon around the reaction chamber. Compared with the model not having thermally isolated structure, the thermally isolated micro reactor showed enhanced thermal performances such as fast temperature variation and low energy consumption. The performance enhancements of the micro reactor due to etched holes were verified by thermal experiment and numerical analysis. Regarding to 42 percents reduction of the thermal mass achieved by the etched holes, approximately 4 times faster thermal variation and 5 times smaller energy consumption were acquired. The total size of the fabricated micro reactor was $37{\times}30{\times}1mm^{3}$. Microchannel and reaction chamber were formed on the silicon substrate. The openings of channel and chamber were covered by the glass substrate. The Pt electrodes for heater and sensor are fabricated on the backside of silicon substrate below the reaction chamber. The dimension of channel cross section was $200{\times}100{\mu}m^{2}$. The volume of reaction chamber was $4{\mu}l$. The temperature of the micro reactor was controlled and measured simultaneously with NI DAQ PCI-MIO-16E-l board and LabVIEW program. Finally, the fabricated micro reactor and the temperature control system were applied to the thermal denaturation and the trypsin digestion of protein. BSA(bovine serum albumin) was chosen for the test sample. It was successfully shown that BSA was successfully denatured at $75^{\circ}C$ for 1 min and digested by trypsin at $37^{\circ}C$ for 10 min.

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.2
• /
• pp.225-230
• /
• 1999

In mouse, the heat shock protein 70-2 (hsp70-2) is found to have special function in spermatogenesis. Based on the observation, the hypothesis that human hspA2 (human gene; 98.2% amino acid homology with hsp70-2) might have important function in spermatogenesis in human testes was proposed. To test the hypothesis, we examined the expression of hspA2 in human tissues. Expression vector pDMC4 for expression of the human hspA2 protein using pTricHisB (invitrogen, USA) was constructed and the expressed hspA2 protein was cross-reacted with antiserum 2A raised against mouse hsp70-2 protein. Based on the cross-reactivity, we determined the expression level of hspA2 protein in human tissues by western blot analysis using the antiserum 2A. We demonstrated that antiserum 2A antibodies detected human hspA2 protein with specificity which was produced in the E.coli expression system. On Western blot analyses, significant hspA2 expression was observed in testes with normal spermatogenesis, whereas a low level of hspA2 was expressed in testis with Sertoli-cell only syndrome. Also, a small amount of hspA2 was detected in breast, stomach, prostate, colon, liver, ovary, and epididymis. These results demonstrate that the hspA2 protein is highly expressed in male specific germ cells, which in turn suggests that hspA2 protein might playa specific role during meiosis in human testes as suggested in the murine model. However, further studies should be attempted to determine the function of hspA2 protein in human spermatogenesis.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.43 no.3
• /
• pp.152-159
• /
• 2017

Objectives: The aim of this study was to investigate the effects of advancement magnitude and changes in mandibular plane angle on the stability of mandibular advancement. Materials and Methods: This retrospective cohort study evaluated the postoperative stability of mandibular advancement in class II skeletal subjects who underwent bilateral sagittal split osteotomy. Radiographs taken preoperatively, immediately postoperatively and 1 year postoperatively were traced and analyzed using linear and angular measurements. To determine horizontal and vertical relapse, an X-Y coordinate system was established in which the X-axis was constructed by rotating S-N downward by $7^{\circ}$ (approximation of the Frankfort horizontal plane) and the Y-axis was defined as a line perpendicular to the X-axis and passing through the point Sella. For certain reference points including point A, point B, pogonion and menton, the perpendicular distance between each point and both axes was determined and cephalometric variables were recorded as X and Y coordinates. Results: Twenty-five subjects were studied. A significant correlation between the amount of mandibular advancement and relapse in the B point (vertical and horizontal) and the pogonion point was observed (vertical and horizontal, P<0.001). Evaluation of data demonstrated a positive correlation between the mandibular plane angle (SN/ML) change and vertical relapse in the B point (P<0.05). A simple regression model demonstrated that 74% of horizontal relapse and 42.3% of vertical relapse in the B point was related to the amount of mandibular advancement. The receiver operating characteristic test showed that 8.5 mm mandibular advancement is related to a relapse rate of 1 mm or more in the pogonion, vertically or horizontally. Conclusion: The magnitude of mandibular advancement is a stronger surgical predictor for horizontal rather than vertical relapse at the B point. Changes in mandibular plane angle (SN/ML) during surgery affect vertical, but not horizontal relapse at the B point.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.12
• /
• pp.1959-1963
• /
• 2014

The feasibility of incorporating flaxseed powder up to 8% (w/w) as a value-added food ingredient in convenient food products was investigated using pound cake as a model system. The moisture content, volume, height, and hardness of cakes decreased significantly with increasing levels of flaxseed powder (P<0.05). On the other hand, baking loss increased with higher flaxseed powder in the formulation (P<0.05). Lightness and yellowness decreased, whereas redness increased significantly (P<0.05). 1,1-Diphenyl-2-picrylhydrazyl (DPPH) and 2,2'-azino-bis-3-ethylbenzthiazoline-6-sulphonic acid (ABTS) radical scavenging activities increased significantly (P<0.05), and they were well correlated. The consumer acceptance test indicated that addition of 2% flaxseed powder had the most favorable effect on consumer preferences in general. Based on the overall observation, pound cakes with 2% flaxseed powder is recommended to take advantage of its functional properties without sacrificing consumer acceptability.