• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.303-309
• /
• 2015

The construction process and safety management are an important means of the total projects for the decision-making. As an important management tool of cost, resources and risks of the project, the analysis and evaluations are recorded as an important asset of company. Also, it has become a safety device that could reduce risk factors repeatedly by the decision-making methods for the future similar projects. Component-based software, by reusing the useful part, which was prepared without newly developing all that, by building a new software product, the long-term continuous/steady through the provision of a component-based software, by securing a sales base, it should be the development and supply a wide range of applications. In this paper, we propose the construction process control systems for increasing modifiability of process creation and modification for business efficiency in accordance with the diverse trends in the construction process as a low-cost niche through a component-based software supplier to solve these problems.

• Ocean Systems Engineering
• /
• v.5 no.1
• /
• pp.1-19
• /
• 2015

The water jetting system for a jack-up spudcan requires the suitable design considering the platform/spudcan particulars, environments, and soil conditions, either the surficial clay or surficial sand. The usage of water jetting depends critically on soil conditions. The water jetting is usually used for the smooth and fast extraction of the spudcan in the surficial clay condition. It is also required for inserting spudcan up to the required depth in the surficial sand condition, which is investigated in this paper. Especially, it should be very careful to use the water jetting during an installation of spudcan in the surficial sand condition, because there is a risk of overturning accident related to the punch-through. Therefore, in this study, the effect of water jetting flow rate and time on the change of soil properties and penetration resistance is analyzed to better understand their interactions and correlations when inserting the spudcan with water jetting in surficial sand condition. For the investigation, a wind turbine installation jack-up rig (WTIJ) is selected as the target platform and the multi layered soil (surficial sand overlaying clays) is considered as the soil condition. The environmental loading and soil-structure interaction (SSI) analysis are performed by using CHARM3D and ANSYS. This kind of investigation and simulation is needed to decide the proper water jetting flow rate and time of spudcan for the given design condition.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.372-378
• /
• 2018

Life management technology is required as the failure risk of aged power transformers increases. Asset management technology is developed to evaluate the remaining life, establish the replacement strategies, and decide the optimal investment based on the reliability and economy of power transformers. The remaining life assessment uses data such as installation, operation, maintenance, refurbishment, and failure of power transformers. The optimal investment also uses data such as maintenance, outage, and social costs. To develop the asset management system for power transformers, determining the degradation parameters related to the aging of power transformers and evaluating the condition of power transformers using these parameters are important. In this study, since 1983, 110,000 Dissolved Gas Analysis (DGA) data have been analyzed to determine the degradation parameters related to the aging of power transformers. The alarm rates of combustible gases ($H_2$, $C_2H_2$, $C_2H_4$, $CH_4$, and $C_2H_6$), TCG, CO, and $CO_2$ were analyzed. The end of life and failure rate (bathtub curve) of power transformers were also calculated based on the failure data from 1981 to 2014. The DGA gases related to discharge, overheating, and insulation degradation were determined based on alarm and failure rates. $C_2H_2$, $C_2H_6$, and $CO_2$ were discharge, oxidation, and insulation degradation parameters related to the aging of power transformers.

• Genomics & Informatics
• /
• v.11 no.4
• /
• pp.211-217
• /
• 2013

Many biobanks were established as biorepositories for biomedical research, and a number of biobanks were founded in the 1990s. The main aim of the biobank is to store and to maintain biomaterials for studying chronic disease, identifying risk factors of specific diseases, and applying personalized drug therapies. This report provides a review of biobanks, including Korean biobanks and an analysis of sample volumes, regulations, policies, and ethical issues of the biobank. Until now, the top 6 countries according to the number of large-scale biobanks are the United Kingdom, United States, Sweden, France, the Netherlands, and Italy, and there is one major National Biobank of Korea (NBK) and 17 regional biobanks in Korea. Many countries have regulations and guidelines for the biobanks, and the importance of good management of biobanks is increasing. Meanwhile, according to a first survey of 456 biobank managers in the United States, biobankers are concerned with the underuse of the samples in their repositories, which need to be advertised for researchers. Korea Biobank Network (KBN) project phase II (2013-2015) was also planned for the promotion to use biospecimens in the KBN. The KBN is continuously introducing for researchers to use biospecimens in the biobank. An accreditation process can also be introduced for biobanks to harmonize collections and encourage use of biospecimens in the biobanks. KBN is preparing an on-line application system for the distribution of biospecimens and a biobank accreditation program and is trying to harmonize the biobanks.

• Smart Media Journal
• /
• v.8 no.4
• /
• pp.38-45
• /
• 2019

When there is a spray flow such as from a pesticide nozzle, winds affect the droplet flow of a rotary-wing drone accompanied by a strong wake, with a severe oscillation. Especially, during forwarding flights or when winds come from the side, compare to a simple hovering flight as the droplet is in the effect of aerodynamic drag force, the effect of spraying region becomes even larger. For this reason, the spraying of pesticides using drones may cause a greater risk of scattering or a difference in droplet dispersion between locations, resulting in a decrease in efficiency. Therefore, through proper numerical modeling and its applied simulation, an indication tool is required applicable for the various flight and atmospheric conditions. In this research, we completed both experiment and numerical analysis for the strong downwash from the rotor and flight velocity of the drone by comparing the probability density function of droplet distribution to build a spraying system that can improve the efficiency when spraying droplets in the pesticide spray drone.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1489-1494
• /
• 2013

Tsunami happens rarely enough to allow a false sense of security, but when they do occur, there may be just minutes or hours for people to reach a safe location. Natural disasters like tsunami are inevitable and it is almost impossible to fully recoup damages caused by the disasters. However, it is possible to minimize the potential risk by developing early warning strategies. GIS modelling with its geoprocessing and analysis capability can play a crucial role in efficient mitigation and management of disaster. This study aims at developing integrated spatial information system processing model supporting tsunami evacuation action planning using geo-information technology such as GIS. The integration process classified into four phases. And in each phase, required input data and GIS processes are decided. The main effort in minimizing casualties in tsunami disaster is to evacuate people from the hazard area before tsunami strikes by means of either horizontal or vertical evacuation. The study provides essential spatial information for local decision making related with people's evacuation in tsunami-prone areas based on a modeling approach transferable to other coastal areas.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.8
• /
• pp.349-356
• /
• 2013

As various features of the smartphone have been used, a lot of information have been stored in the smartphone, including the user's personal information. However, a frequent update of the operating system and applications may cause a loss of data and a risk of missing important personal data. Thus, the importance of data backup is significantly increasing. Many users employ the backup feature to store their data securely. However, in the point of forensic view these backup files are considered as important objects for investigation when issued hiding of smartphone or intentional deletion on data of smartphone. Therefore, in this paper we propose a scheme that analyze structure and restore data for Kies backup files of Samsung smartphone which has the highest share of the smartphone in the world. As the experimental results, the suggested scheme shows that the various types of files are analyzed and extracted from those backup files compared to other tools.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.7
• /
• pp.1236-1241
• /
• 2016

Cancer has been the most frequent in Korea, and pathogenesis and progression of cancer have been known to be occurred through various causes and stages. Recently, the research of chromosomal and genetic disorder and the research about prognostic factor to predict occurrence, recurrence and progress of chromosomal and genetic disorder have been performed actively. In this paper, we analyzed DNA methylation data downloaded from TCGA (The Cancer Genome Atlas), open database, to research bladder cancer which is the most frequent among urinary system cancers. Using three level of methylation data which had the most preprocessing, 59 candidate CpG island were extracted from 480,000 CpG island, and then we analyzed extracted CpG island applying data mining technique. As a result, cg12840719 CpG island were analyzed significant, and in Cox's regression we can find the CpG island with high relative risk in comparison with other CpG island. Shown in the result of classification analysis, the CpG island which have high correlation with bladder cancer are cg03146993, cg07323648, cg12840719, cg14676825 and classification accuracy is about 76%. Also we found out that positive predictive value, the probability which predicts cancer in case of cancer was 72.4%. Through the verification of candidate CpG island from the result, we can utilize this method for diagnosing and treating cancer.

• Journal of the Korean Institute of Gas
• /
• v.3 no.3 s.8
• /
• pp.45-50
• /
• 1999

The LPG refueling station's explosion at Bucheon city was a major accident which with rare frequency of occurrence and large damage effect. Therefore, to prevent similar accident in the future from LPG charging stations which located in urban area. It needs to identify the damage effects of such facilities by comparing theoretically quantities risk and actual damage. The BLEVE effects from the accident showed similar damage effect in case of heat flux, however, the overpressure level reflected at the reduced distance by $15\%$. The structure damage to the near by area showed comparatively large heat radiation damage to the concrete structure strength and shape changes through heat flux while the overpressure effect was small.

• Land and Housing Review
• /
• v.3 no.2
• /
• pp.147-157
• /
• 2012

The Korean government required the mandatory ratio of public housing including the housing unit for elderly in February 2012 and the number of them is expected to increase accordingly. To prepare for an aged society, these enabling ubiquitous technology will be able to support efficient health care services, which was mentioned in various studies. Therefore, the aim of this study is to draw the design elements for an apartment for providing health care services according to the degree of independence of elderly people and to grasp the current situation and work out tactics by the evaluation of four actual cases. In housing unit in the elderly housing project, design elements supporting amenity improvement was rated to the highest importance, however, in reality, was reflected at lower rate while the risk management plan for public space was applied at the highest rate. Design elements required by new technology such as health monitoring and community management with outside world are still not reflected, however, in order to realize the concept of 'aging in place', health care services in various aspects should be considered in housing planning.