• Journal of the Korean Wood Science and Technology
• /
• v.20 no.2
• /
• pp.43-50
• /
• 1992

This study was carried out to investgate the possiblity of using waste bamboo and bast fiber from paper mulberry for Hwaseonji production. 3 types of Hwaseonji were made in an experimental system, 100% bamboo pulp, bamboo pulp mixed with bast fiber in two different ratios, 70% : 30% and 40% : 60%, respectively. The result were as follows: 1. The chinese ink blots of Hwaseonji made from bamboo pulp only was satisfactory, but its tensile strength showed a low value. In order to improve the tensile strength, we must develope a new beating method with musilige. 2. The burst strength increased as the bast fiber content increased. But it is a special characteristic of Hwaseonji, that an even formation of paper is required. Therefore, only the short bast fiber is needed. 3. The tensile strength was raised by increasing the bast fiber content to 60%, resulting in a more durable Hwaseonji. 4. In even thickness, the higher opacity showed the more bast fiber. So the opacity of product III (bamboo: 40%, bast fiber: 60%) is the highest. 5. The commodity value of hand-made paper should be grade-up after a dedusting process.

• Journal of Dairy Science and Biotechnology
• /
• v.23 no.1
• /
• pp.19-26
• /
• 2005

Nanofood can be simply defined as natural polymer particles containing functional food materials in nanoscale that are synthesized by polymerization or emulsification process. They have very uniform diameters in the range of 1 to 100nm and extensive surface areas due to the small particle size in spite of their non-porosity. Although the technique to produce nanofood has not long developing history, many works have been achieved in various fields. Nanofood has a lot of special advantages, such as functionality, diversity, applicability, etc. In case of the domestic food industries, however, the accumulation of related technique is insufficient against developed countries except used food materials. Also, it is difficult to acquire technical know-how from the developed countries that possess those technologies. We have been studied on preparing functional nanofood and developing new production processes since 1999. Last 5 years we have laid the foundation on the preparation of nanofood and now are focusing on developing new processes of nanofood and expending the field of its applications.

• Korean Journal of Human Ecology
• /
• v.21 no.4
• /
• pp.745-764
• /
• 2012

The purpose of this study is to investigate the characteristics of ethical consumption in the Community Currency Movement participant's daily life as a consumer. Qualitative research methods are used for the understanding about the participation activities and the daily lives as a consumer of Hanbat LETS participants'. The characteristics of ethical consumption used for analysing of the Community Currency Movement are the subjective participation, production process-aware consumption, others care to consumption, sustainable consumption, voluntarily simple life. The major results of this study show that the Community Currency Movement is the alternative economic system practicing the ethical consumption. The Community Currency Movement increase the subject participation, realize the social responsibility and community society and the ecological value and voluntary simple life. This research get the meaning for considering the Community Currency Movement & the ethical consumption on the discriminatory perspective.

• Journal of Applied Biological Chemistry
• /
• v.63 no.3
• /
• pp.235-241
• /
• 2020

An essential component of the hemostatic process during vascular damage is platelet activation. However, many cardiovascular diseases, such as atherosclerosis, thrombosis, and myocardial infarction, can develop due to excessive platelet activation. Isoscopoletin, found primarily in plant roots of the genus Artemisia or Scopolia, has been studied to demonstrate potential pharmacological effects on Alzheimer's disease and anticancer, but its mechanisms and role in relation to thrombus formation and platelet aggregation have not yet been discovered. This research investigated the effect of isoscopoletin on collagen-induced human platelet activation. As a result, isoscopoletin strongly increased cyclic adenosine monophosphate (cAMP) and cyclic guanosine monophosphate (cGMP) levels in a concentration-dependent manner. In addition, isoscopoletin greatly phosphorylated inositol 1,4,5-triphosphate receptor (IP₃R) and vasodilator-stimulated phosphoprotein (VASP), known substrates of cAMP-dependent kinase and cGMP dependent kinase. Phosphorylation of IP₃R by isoscopoletin induced Ca²⁺ inhibition from the dense tubular system Ca²⁺ channels, and VASP phosphorylation was involved in fibrinogen binding inhibition by inactivating αIIb/β₃ in the platelet membrane. Isoscopoletin finally reduced thrombin-induced fibrin clot production and finally reduced thrombus formation. Therefore, this research suggests that isoscopoletin has strong antiplatelet effects and is likely to be helpful for thrombotic diseases involving platelets by acting as a prophylactic and therapeutic agent.

• Journal of Drive and Control
• /
• v.11 no.4
• /
• pp.8-14
• /
• 2014

The transmission control method of a small forklift is classified into a pilot control method and a direct control method. In the pilot control method, the complex hydraulic circuit consists of many components, making the production process too costly and time consuming. The direct control method contains fewer components that can be configured to simple hydraulic circuits. As another advantage, the input profile easily changes the shift sensitivity of the transmission. Therefore, this research considers the characteristics of the direct control method in the development of hydraulic system design. This paper will present a simulation of the direct control transmission using AMESim. First, modeling of the direct control method is obtained and simulated with real parameters. The simulation results then are carried out and compared with the experimental results to verify and analyze the characteristics of the direct control method.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.4
• /
• pp.63-71
• /
• 2014

As power consumption increases, more power utilities are required to satisfy the demand and consequently results in tremendous cost to build the utilities. Another issue in construction of power utilities to meet the peak demand is an inefficiency caused by surplus power during non-peak time. Therefore, most power company considers power demand management with time-based electricity rate policy which applies different rate over time. This paper considers an optimal machine operation problem under the time-based electricity rates. In TOC (Theory of Constraints), the production capacities of all machines are limited to one of the bottleneck machine to minimize the WIP (work in process). In the situation, other machines except the bottleneck are able to stop their operations without any throughput loss of the whole manufacturing line for saving power utility cost. To consider this problem three integer programming models are introduced. The three models include (1) line shutdown, (2) block shutdown, and (3) individual machine shutdown. We demonstrate the effectiveness of the proposed IP models through diverse experiments, by comparing with a TOC-based machine operation planning considered as a current model.

• Journal of Arbitration Studies
• /
• v.14 no.1
• /
• pp.185-211
• /
• 2004

It is a common and prevailing Construction that recent environmental problems such as earth's warmer climate and depletion of ozone layers can never be solved by the efforts of any one nation. That is why the international conventions have been held more often lately in order to discuss the matter of environment protection and there has been increased tendency of using economic activities of any nation especially their international trades as means for achieving the purpose of environment protection. Furthermore, there is an ample possibility for the advanced countries to use the regulatory restrictions for environment protection as an another measure of none-tariff barrier against countries including Korea which has high dependence on international trade with not very high technological capability of environment protection. Some of the developed countries have recently moved toward the creation of a new system of international regulatory measures on world trade in the name of Environment Protection. They Plan to impose strict control over the process and technology of production of good they are importing from other country. However, ever though the international regulatory measures, in a short term, could play a negative role on our trade capability, they could, in the long run, also play a role of helping hands if we usefully work out positive countermeasures as a result of hand-working government supported by industry and all the society as a whole.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.1
• /
• pp.135-149
• /
• 1988

Friction welding has been shown to have significant economic and technical advantages. However, one of the major concerns in using friction welding is the reliability of the weld quality. No reliable nondestructive test method is available at present for detecting weld quality, particularly in a production environment. Friction welds are formed by the mechanisms of diffusion as well as mechanical interlocking. The severe plastic flow at the interface by forge action of the process brings the subsurfaces so close together that detection of any unbonded area becomes very difficult. This paper presents an attempt to determine the friction weld strength quantitatively using the ultrasonic pulse-echo method. Instead of detecting flaws or cracks at the interface, the new approach calculates the coefficient of reflection based on measured amplitudes of the echoes. It has been finally confirmed that this coefficient could provide the quantitative relationship to the weld quality such as tensile strength, torsional strength, impact value, hardness, etc. So a new nondestructive analysis system of friction weld strength of dissimilar metals using an ultrasonic technique could be well developed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.3
• /
• pp.335-341
• /
• 2011

In this paper, we proposed an automatic packing mechanism of one station concept for fastener objects where the continuous work is performed in a finite space. The proposed packing mechanism is composed of supporting frame, feeding supply, air shower device, clamping/opening device, batch charging device, sealing/cutting device and supply adjusting device. And, these mechanisms have been modularized through mechanical, dynamical, structural and fluid optimized design using the SMO(SimDesigner Motion) analysis module. Also, the virtual prototype was carried out using the 3-D CAD program. The packing process is consisted performed in the order of feeding, clamping, bottom sealing, cutting, opening, object charging, closing and the upper sealing. And the time of these cycles were designed to be completed in 15-20 seconds. This packing mechanism will be created as a prototype in the near future. In addition, it will be applied to the production scenes after going through a field test for the validation of performance.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.2
• /
• pp.27-34
• /
• 2018

In this paper, we propose a new method to read the hand of analog gauges to prepare for the smart factory. In addition, we suggest a new and improved method that can apply, in general, diverse analog gauges even if their scale types and ranges are various. Many companies are making great efforts to build smart factories that increase energy efficiency and automation. Managers use a variety of equipment and tools to manage the production process at the factory. In this kind of factory, analog gauges have been often used with many equipment and tools. Analog gauges are mostly circular in shape, and most papers use circular hough transform to find the center and radius of a circle. However, when the object to be found is not of the correct circle type, it takes a long time to recognize the circle using the circular hough transform, and the center and radius of the circle can not be calculated accurately. The proposed method was tested on various circular analog gauges. As a result, we confirmed that our method is outstanding.