• Proceedings of the Korean Association for Survey Research Conference
• /
• 2000.06a
• /
• pp.137-159
• /
• 2000

In this paper, the following facts have been reviewed: First, statistics should have the characteristics of descriptive, inferential, and applicative statistics in "information-Knowledge Society." Second, the computer has been employed in the process data collection and data analysis for producing the statistics with timeliness and efficiency. Third, we have to develop a statistical development plan which lays emphasis on the production of applicative statistics in the coming "Internet Cyber Society." In addition, we investigaated statistical survey methods. The prospects of internet surveys were also investigated here. On the basis of the above review and investigation. we suggested "an integrated system of computer-assisted statistical surveys" that can be applied to all kinds of surveys and statistics.nds of surveys and statistics.

• Korea-Australia Rheology Journal
• /
• v.20 no.4
• /
• pp.235-243
• /
• 2008

The aim of this study is to explore the possibility of incorporating supercritical carbon dioxide ($scCO_2$) into twin screw extrusion process for the production of polypropylene-clay nanocomposite (PPCN). The $CO_2$ is used as a reversible plasticizer which is expected to rapidly transport polymeric chains into the galleries of clay layers in its supercritical condition inside the extruder barrel and to expand the gallery spacings in its sub-critical state upon emerging from die. The structure and properties of the resulting PPCNs are characterized using wide-angle X-ray diffraction (WAXD), transmission electron microscopy (TEM), rheometry, thermogravimetry and mechanical testing. In the processing of the PPCNs with $scCO_2$, optimum $scCO_2$ concentration and screw speed which maximized the degree of intercalation of clay layers were observed. The WAXD result reveals that the PP/PP-g-MA/clay system treated with $scCO_2$ has more exfoliated structure than that without $scCO_2$ treatment, which is supported by TEM result. $scCO_2$ processing enhanced the thermal stability of PPCN hybrids. From the measurement of linear viscoelastic property, a solid-like behavior at low frequency was observed for the PPCNs with high concentration of PP-g-MA. The use of $scCO_2$ generally increased Young's modulus and tensile strength of PPCN hybrids.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.3
• /
• pp.298-307
• /
• 2016

In the building process of FPSOs(floating production, storage and offloading units) is the increasing demand of high performance piping joints that can be installed on its turret system and maintain smooth and long-term flow of ultra-high pressure crude oil, being subjected to external excitations such as wind and wave on the sea. Following such a trend, in this paper, a new-type piping joint of four effective degrees of freedom has been designed, and its dynamic characteristics predicted through mathematical modeling and computer simulations. Moreover, via an example it was shown how the yaw motion in particular can be independently controlled for future durability test despite strong kinetic couplings.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.2
• /
• pp.175-190
• /
• 2014

This study analyzes the business strategy of fast fashion through Zara, a successful fashion brand from Inditex Spain. An in-depth case approach is adopted based on extensive secondary research that includes literature and press releases published in Korean as well as English. The findings of this research demonstrate a speedy and flexible process occurring in the supply chain of its fast fashion business and the cooperation between the company's headquarters and international subsidiaries. Zara's headquarters executes four representative strategies: competitive market research, an integrated organizational structure, small quantity batch production, and a specialized distribution system. Zara's international subsidiaries execute their own four representative strategies: differentiated international expansion, independent human resource management, small but fundamental IT, and maximization of store resources. These two core parts intimately work together to satisfy target customers all over the world by bringing competitive advantages to the fashion business and represent a key concept of Zara's business strategy. The main drawbacks of case studies are limited validity and representativeness restraining the potential for making generalizations. However this case is considered sufficient to provide valuable insight and improve the understanding of operation strategy in fast fashion.

• Agribusiness and Information Management
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2019

This research intends to propose the methodology for analyzing the current trends of agriculture, which directly connects to the survival of the nation, and through this methodology, identify the agricultural trend of Korea. Based on the relationship between three types of data - policy reports, academic articles, and news articles - the research deducts the major issues stored by each data through LDA, the representative topic modeling method. By comparing and analyzing the LDA results deducted from each data source, this study intends to identify the implications regarding the current agricultural trends of Korea. This methodology can be utilized in analyzing industrial trends other than agricultural ones. To go on further, it can also be used as a basic resource for contemplation on potential areas in the future through insight on the current situation. database of the profitability of a total of 180 crop types by analyzing Rural Development Administration's survey of agricultural products income of 115 crop types, small land profitability index survey of 53 crop types, and Statistics Korea's survey of production costs of 12 crop types. Furthermore, this research presents the result and developmental process of a web-based crop introduction decision support system that provides overseas cases of new crop introduction support programs, as well as databases of outstanding business success cases of each crop type researched by agricultural institutions.

• Journal of Biosystems Engineering
• /
• v.37 no.6
• /
• pp.365-372
• /
• 2012

Purpose: Performance of slurry composting and biofiltration with methane production (SCB-M) using swine manure and sawdust was evaluated. The suitable specific liquid input (SLI) was determined at lab-scale SCB. Method: In lab-scale SCB, the SLI test was performed at liquid input rate of 0.04, 0.09, $0.17cc/cm^3$ with constant sawdust volume. In pilot-scale SCB-M, the swine manure was fed to methane digester at organic loading rate (OLR) of 0.25-0.5 g VS/L/d. The effluent from methane digester was filtered using SCB. Results: The SLI at $0.04cc/cm^3$ showed good performance in terms of retention time. In pilot-scale SCB, the removal of $NH_3$-N and total nitrogen (T-N) was found to be around 59% and 28%, respectively. Similarly, volatile fatty acid (VFA) and total chemical oxygen demand (TCOD) removal was found be 56% and 43%, respectively. Conclusions: For SCB-M process, the SLI of $0.04cc/cm^3$ is recommended. The performance of swine manure treatment was improved more by using SCB-M system than using methane digester only.

• Journal of Dairy Science and Biotechnology
• /
• v.34 no.4
• /
• pp.271-278
• /
• 2016

The main purpose of milk heat-treatment is to improve milk safety for consumer by destroying foodborne pathogens. Secondly, heat-treatment of milk is to increase maintaining milk quality by inactivating spoilage microorganisms and enzymes. Pasteurization is defined by the International Dairy Federation (IDF, 1986) as a process applied with the aim of avoiding public health hazards arising from pathogens associated with milk, by heat treatment which is consistent with minimal chemical, physical and organoleptic changes in the product. Milk pasteurization were adjusted to $63{\sim}65^{\circ}C$ for 30 minutes (Low temperature long time, LTLT) or $72{\sim}75^{\circ}C$ for 15 seconds (High temperature short time, HTST) to inactivate the pathogens such as Mycobacterium bovis, the organism responsible for tuberculosis. Ultra-high temperature processing (UHT) sterilizes food by heating it above $135^{\circ}C$ ($275^{\circ}F$) - the temperature required to destroy the all microorganisms and spores in milk - for few seconds. The first LTLT system (batch pasteurization) was introduced in Germany in 1895 and in the USA in 1907. Then, HTST continuous processes were developed between 1920 and 1927. UHT milk was first developed in the 1960s and became generally available for consumption in the 1970s. At present, UHT is most commonly used in milk production.

• Journal of Korea Port Economic Association
• /
• v.17 no.1
• /
• pp.3-26
• /
• 2001

Competitive and reliable maritime transport services benefit the economy as a whole, and are key efficiency factors for the production of both goods and services. Although maritime transport sector is very liberalized compared to many other service sectors, certain obstacles must be overcome before full liberalization of the maritime transport can be realized. Particularly, maritime transport services in Northeast Asia are regulated by a complicated and outdated system. To remove these barkers two approaches can be used: a regional trading arrangement approach and a multilateral approach via WTO. However, multilateral efforts are not likely to be successful in achieving any concrete progress towards maritime transport liberalization in the short- to medium-term in Northeast Asia. Consequently, it may be the best to take the following two progressive approaches and to make them work towards liberalization of the maritime transport market: a bilateral approach and a trilateral approach. A gradual process of liberalization would expand the market, help operators achieve economies of scale, promote the international division of labor and specialization, enhance the effective management of shipping services, and promote the long-term interests and welfare of the user by improving service quality and diversifying services. A liberalized and integrated maritime transport market in Northeast Asia should achieve both of these long-run policy objectives by benefiting both the transport service users and the transport service providers. In order to move the maritime transport liberalization programs as quickly as possible, it is desirable to establish a "Regional Maritime Transport Liberalization Committee." We suggest it to be a Tripartite (China, Japan and Korea) Committee initially, which can later expand its membership to include other Northeast Asian countries.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1999.07a
• /
• pp.45-49
• /
• 1999

Plant cell culture is emerging to express bioactive foreign proteins because it has several advantages in that it is safe, economical, genetically stable and eukaryotic expression system comparing with other expression systems. However several limitations such as slow growth rate, low expression level and lack of well established down stream process need to be answered. As a preliminary approach to produce the immunologically interested molecules through the plant cell culture, we tested if granulocyte-macrophage colony stimulating factors (GM-CSFs) from both murine (mGM-CSF) and human (hGM-CSF) are produced as a biologically active form through plant cell culture. The murine and human GM-CSF genes were cloned into the plant expression vector, pBI121, and Ti-plasmid mediated transformation of tobacco leaves was conducted using Agrobacterium tumefaciens harboring both recombinant GM-CSF (rGM-CSF) genes. Cell suspension culture was established from the leaf-derived calli of transgenic tobacco plant. Northern blot analysis indicated the expression of the introduced mGM-CSF gene in both transgenic plant and cell suspension cultures. In addition, the biological activities of both murine and human GM-CSF from plant cell culture were confirmed by measuring the proliferation of the GM-CSF dependent FDC-PI and TF-1 cells, respectively.

• Korean Journal of Materials Research
• /
• v.11 no.9
• /
• pp.763-768
• /
• 2001

Molybdenum-based thermal spray powder is widely used for coating the moving parts of the internal combustion engines due to its excellent wear resistance. A composite powder of the $Mo_{40}(Al_{1-x}Si_x)_{60}$ system was synthesized using the SHS method. The synthesized bulk was pulverized and specially treated to produce thermal spray powder. It was found that the synthesis reaction consisted of two-steps: the formation of $Al_8/Mo_3$ and the formation of Mo(Al,Si)$_2$. Both the temperature and the rate of the SHS reaction linearly increased with the increase of the value of x in $Mo_{40}(Al_{1-x}Si_x)_{60}$, The temperature and the rate of the reaction were also affected by the compacting density of the specimens, exhibiting the maximum valves at 62% and 60%, respectively. Since spherical shape is advantageous to the thermal spraying process, shape-control of the powder was attempted with PVA as a binding additive, resulting in the successful production of almost perfectly spherical powder of 80 $\mu\textrm{m}$ Ø$(d_{50})$ mean particle size.