• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.1
• /
• pp.75-82
• /
• 2009

In this parer, we propose a new way of improving DGNSS service using combination of multiple SBAS information. Because SBAS uses Geostationary Earth Orbit (GEO) satellites, it has very large coverage but it can be unavailable in urban canyon because of visibility problem. R. Chen solved this problem by creating Virtual Reference Stations (VRS) using the SBAS signal [1]. VRS converts SBAS signal to RTCM signals corresponding its location, and broadcast the converted RTCM signals over the wireless internet. This method can solve the visibility problem cost effectively. Furthermore it can solve DGNSS coverage problem by creating just a transmitter instead of a reference station. Developing above method, this paper proposes the methods that integrate two or more SEAS signals into one RTCM signal and broadcast it. In Korea, MSAS signal is available even though it is not officially certified for Korean users. As a Korean own SBAS-like system, there is the internet-based KWTB (Korean WADGPS Test Bed) which we developed and released at ION GNSS 2006. As a result, virtually two different SBAS corrections are available in Korea. In this paper, we propose the integration methods for these two independent SBAS corrections and present the test results using the actual measurements from the two systems. We present the detailed algorithm for these two methods and analyze the features and performances of them. To verify the proposed methods, we conduct the experiment using the logged SBAS corrections from the two systems and the RINEX data logged at Dokdo monitoring station in Korea. The preliminary test results showed the improved performance compared to the results from two independent systems, which shows the potential of our proposed methods. In the future, the newly developed SBASs will be available and the places which can access the multiple SBAS signals will increase. At that time, the integration or combination methods of two or more SBASs will become more important. Our proposed methods can be one of the useful solutions for that. As an additional research, we need to extend this research to the system level integration such as the concept of the decentralized W ADGPS.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.1
• /
• pp.60-72
• /
• 2007

In general, the importance of geological information is emphasized not only for national SOC construction, underground space development and energy resources development but also in areas related to environmental disasters such as mine damage, ground subsidence and landslides. Although geological information is highly useful in developing industrial raw materials, national land management and people's welfare, there is no unified governmental institution in charge of collecting and managing geological information in the national level. For this, this paper study: first, to analyze geological demand for common experts; second, to analyze geological demand for public institution; and third, to set priority for geological informatization. In the result of surveying demand for geological information, we need to improve laws and systems for collecting and reporting geology-related materials, making thematic maps, and maintaining and managing geological information we need to establish national strategies and build an integrated system for interoperability of databases and systems. Accordingly, we will guideline on future direction of strategies for the national integration of geological information management system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8C
• /
• pp.680-689
• /
• 2012

U-healthcare is maintaining of users' health without limitations from where and when they are. As it is important to guarantee compatibility between heterogeneous systems in U-healthcare, a medical information standard is compulsory. An adequate standard means that it is easy to understand and it can cover wide range of information types and various medical devices. Among them, HL7(Helath Level 7) has those traits, but HL7 is not adequate for non-text message, especially for medical waveform. JAHIS suggested an appropriate standard, that is MFER. MFER has many advantages for representation of medical waveform, but it is still not good for real-time applications. In U-healthcare, there are lots of needs for real-time application, so we need a standard that can have useful properties of MFER and HL7, and support real-time. In this article, there are two main topics. The first one is introducing MFER and HL7. Second, the new scheme(TS-MFER with HL7) is developed by modifying MFER and HL7 for real-time applications.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.436-444
• /
• 2018

Currently, the new substation automation uses the international standard IEC 61850 communication protocol. KEPCO is also constructing a new substation based on IEC 61850 from 2013 through the pilot application and research and development starting from 2007. However, there are few cases where existing substations(Transformer, T/L GIS, D/L GIS, etc.) have been used, and RTU based substations operating systems have been changed to SA substations based on IEC 61850. Therefore, the introduction of IEC 61850 in existing substation facilities has the advantage of enhancing the substantiality of the substation by reusing existing facilities, improving the interoperability with the latest substations introduced, and converting existing substations into systems suitable for unmanned operation. In this paper, we introduce a case of changing the existing RTU based substation operation system to digital substation using IEC 61850 field information processor, Ethernet switch and SA operation system. Also, IEC 61850 client authentication program and Wireshark, which is a packet analysis tool, verify IEC 61850 conformance and its feasibility.

• Smart Media Journal
• /
• v.9 no.2
• /
• pp.51-62
• /
• 2020

Starting with the "Smart Grid National Road Map" in 2010, the Smart Grid 2030 was introduced through the basic plan and implementation plan of the intelligent power grid with the goal of building the world's first national smart grid. In this paper, we intend to build a power domain ontology based on the power business platform based on the upper and lower conceptual models of the "Smart Grid Interoperability Standard Framework and Roadmap", the standard of implementation plan. Ontology is suitable for expressing and utilizing the smart grid conceptual model because it considers hierarchical structure as knowledge defines the properties of entities and relationships between entities, but there is no research related to them. Therefore, in this paper, the upper ontology was defined as a major category for smart grid-related fields, and the lower ontology was defined as detailed systems and functions for the upper ontology to construct the ontology. In addition, scenarios in various situations that could occur in the power system were constructed and significant inference results were derived through inference engines and queries.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1556-1564
• /
• 2011

The increased life expectancy of human due to the advance of medical techniques has led to many social problems such as rapidly aging populations, increased medical expenses and a lack of medical specialists. Thus, studies on improving the quality of life with the least amount of expense have been going on by incorporating advanced technologies, especially for Personal Health Devices (PHDs), into the medical service market. However, compatibility and extensibility among manufacturers of PHDs have not been taken into account in most of the researches done on the development of PHDs because most of them have been supported by individual medical organizations. The interoperability among medical organizations can not be guaranteed because each medical organization uses different format of the messages. Therefore, in this paper, an expansion module that can enable commercially-available non-standard PHDs to support the IEEE 11073, and a smart-phone-based manager that can support easy and comprehensive management on receiving and transmitting the collected data from each PHD using IEEE 11073 standard were developed. In addition, a u-health system that can transmit the data collected in the manager using the standard data format HL 7 to medical center for real-time medical service from every medical institutions that support this standard was designed and developed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.119-120
• /
• 2012

The International Hydrographic Organization (IHO) developed S-100 standards as a framework for a variety of data and service for hydrography and a standard research is in process, including a next-generation electronic chart standard, for products and services based on this.The need for standard storage and utilization of navigation routes generated by ECDIS and navigation system using navigation planning features has emerged and a standard research based on S-100 standard has been performed. Route information standard is needed for interoperability among route information generated by a variety of navigation system and requires an examination for the possibility of applicability. In this research, route generation tools and standard-based generation and result of route information using these tools in order to examine the application of route information standards have been executed.In details, first, as a module capable of generating route information, a module that can store values in memory based on route information standards of S-100, second, a module that can store route information in the memory in XML form, third, it includes loading module for route information stored as XML.In this research, we verified normal generation of route information, storage of generated route information and loading functions through developing three modules.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.8
• /
• pp.343-352
• /
• 2017

IEC62541, known as OPC-UA, is a standard communication protocol for Smart Grid (SG) and Smart Factory application platform. It was accepted as an IEC standard (IEC62541) in 2011 by IEC TC57, and is extending range of application as collaborating with other standrads. The government's policies to popularize EVs ("Workplace Charging Challenge"), the number of Electric vehicle which try to be charging in the factory is expected to increase. In this situation, indiscreet and uncontrolled EV charging can lead to some problems, such as excess of the peak demand capacity. Therefore, EVs, which is charging in SFs, must be monitoring and controlling to avoid and reduce peak demand. However, the standards for EVs charging differ from the standards for SFs. In other words, to increase the ease of use for drivers, and reduce risk for enterprise, we have needs of study to develop the protocols or to provide interoperability, for EVs charging in SFs. This paper deals with a EV charging management platform installing in a smart factory. And this platform can be easily integrated as part of SF management software. The main goal of this paper is to implement EV management system based on IEC61851 and IEC62541.

• The Journal of Society for e-Business Studies
• /
• v.23 no.3
• /
• pp.159-171
• /
• 2018

The imported foods, which are imported and sold domestically, are on the rise every year, and the scale is expected to be larger, including processing the imported raw materials. However, the origin of raw materials is indicated when declaring cargo for finished products of agricultural products, but the standardization of inspection information management system for raw materials is insufficient. In addition, there is a growing concern about the presence of residual pesticides or radioactivity in raw materials or products, and customer want to know production history information when purchasing agrifoods. It manages the hazard analysis of imported agricultural products, but most of them are global issues such as microorganisms, residual pesticides, food additives, and allergy components, etc. Therefore, it is necessary to share among the logistics entities in the entire transportation process the related data. Additionally, to do this, it needs to design an architecture and standardize business model. In this paper, it defines the architecture and the work-flow that occurs between the business process for collecting, processing, and processing information for tracking the status of imported agricultural products by steps, and develops XML message with UBL and the extracted conceptual information model. It will be easy to exchange and share information among the logistics entities through the defined standard model and it will be possible to establish visibility, reliability, safety, and freshness system for transportation of agricultural products requiring real-time management.

• Journal of Convergence for Information Technology
• /
• v.9 no.9
• /
• pp.13-19
• /
• 2019

This paper analyzed the SCMS and pilot policy, which is pursued by the U.S. government in connected vehicles. SCMS ensures authentication, integrity, privacy and interoperability. The SCMS Support Committee of U.S. government has established the National Unit SCMS and is responsible for system-wide control. Of course, it introduces security policy, procedures and training programs making. In this paper, the need for SCMS to be applied to C-ITS was discussed. The structure of the SCMS was analyzed and the U.S. government's filot policy for connected vehicles was discussed. The discussion of the need for SCMS highlighted the importance of the role and responsibilities of SCMS between vehicles and vehicles. The security certificate management system looked at the structure and analyzed the type of certificate used in the vehicle or road side unit (RSU). The functions and characteristics of the certificates were reviewed. In addition, the functions of basic safety messages were analyzed with consideration of the detection and warning functions of abnormal behavior in SCMS. Finally, the status of the pilot project for connected vehicles currently being pursued by the U.S. government was analyzed. In addition to the environment used for the test, the relevant messages were also discussed. We also looked at some of the issues that arise in the course of the pilot project.