• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.32 no.1
• /
• pp.391-413
• /
• 2021

Policy study information is the essential source of information in every step of decision making process to plan, execute and assess the national operation policy. The policy study subject of a national policy research center from study design the performance assessment on its practical effect is managed via thorough process to secure its effectiveness and efficiency. However, the directly exposed information to the practical user or the public who are in need of actual policy study information is the resource published in a form of policy study report, the final result. NKIS operated by the National Research Council for Economics, Humanities and Social Sciences under the Office for Government Policy Coordination, Prime Minister's Secretariat is a public information offering service that conduct integrated management on study reports from cooperative study among institutes along with policy outcome from 27 national policy research centers. This study aims to introduce the current status of operation and information management of NKIS, apprehend the management characteristics of policy study information resources of national policy research center, and deduce remarks that need to be considered for API with external service for the derivation of standardized sharing data element.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.99-104
• /
• 2022

Recently, the domestic demand for weapon systems based on aircraft platforms is gradually increasing. In particular, the demand for effective precision guided missile(PGM) which cruises for several hundred kilometers after launch to strike the ground target is rising drastically, but it is in the early stages of development, and research based on it are limited. This paper is a study on the power converter unit(PCU) within PGM which is mounted on an aircraft platform based on MIL-STD-1760, which is an interface between an aircraft and PGM. We investigated the electrical properties and structure of the umbilical connector, and the aircraft/store electrical interconnection system. Also, the focus on the design specifications of the PCU that supplies power were described. This result 3 phase AC input, which is the state for the guided simulation power supply in the state of being mounted on an aircraft that rectification method with power factor correction(PFC) compared to bridge rectifier circuit. In the future, it may be used as a basis for power supply design on aircraft mounted weapon systems.

• Journal of the Korea Computer Graphics Society
• /
• v.27 no.5
• /
• pp.1-11
• /
• 2021

The purpose of our research is to efficiently deform a 3D models which is composed of a triangular mesh and a skeleton. We designed a novel inverse kinematics (IK) solver that calculates the updated positions of mesh vertices with fewer computing operations. Through our user interface, one or more markers are selected on the surface of the model and their target positions are set, then the system updates the positions of surface vertices to construct a deformed model. The IK solving process for updating vertex positions includes many computations for obtaining transformations of the markers, their affecting joints, and their parent joints. Many of these computations are often redundant. We precompute those redundant terms in advance so that the 3-nested loop computation structure was improved to a 2-nested loop structure, and thus the computation time for a deformation is greatly reduced. This novel IK solver can be adopted for efficient performance in various research fields, such as handling 3D models implemented by LBS method, or object tracking without any markers.

• Ocean and Polar Research
• /
• v.44 no.4
• /
• pp.269-285
• /
• 2022

The interaction between ocean and ice shelf is a critical physical process in relation to water mass transformations and ice shelf melting/freezing at the ocean-ice interface. However, it remains challenging to thoroughly understand the process due to a lack of observational data with respect to ice shelf cavities. This is the first study to simulate the variability and circulation of water mass both overlying the continental shelf and underneath an ice shelf and an ice tongue in the Terra Nova Bay (TNB), East Antarctica. To explore the properties of water mass and circulation patterns in the TNB and the corresponding effects on sub ice shelf basal melting, we explicitly incorporate the dynamic-thermodynamic processes acting on the ice shelf in the Regional Ocean Modeling System. The simulated water mass formation and circulation in the TNB region agree well with previous studies. The model results show that the TNB circulation is dominated by the geostrophic currents driven by lateral density gradients induced by the releasing of brine or freshwater at the polynya of the TNB. Meanwhile, the circulation dynamics in the cavity under the Nansen Ice shelf (NIS) are different from those in the TNB. The gravity-driven bottom current induced by High Salinity Shelf Water (HSSW) formed at the TNB polynya flows towards the grounding line, and the buoyance-driven flow associated with glacial meltwater generated by the HSSW emerges from the cavity along the ice base. Both current systems compose the thermohaline overturning circulation in the NIS cavity. This study estimates the NIS basal melting rate to be 0.98 m/a, which is comparable to the previously observed melt rate. However, the melting rate shows a significant variation in space and time.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.2
• /
• pp.164-177
• /
• 2022

Medical device usability evaluation refers to the evaluation of medical devices through actual users before the final prototype production is completed. IEC 62366, one of the international safety standards for electronic medical devices, is a standard that must be applied to obtain medical device licenses in major advanced countries such as Europe and the United States. In Korea, through the Ministry of Food and Drug Safety's notice, from January 2021, sequential application by grade has been implemented. In this study, 15 participant specialists were recruited through the Incheon G University Hospital Medical Device Convergence Center for formative evaluation during user suitability evaluation of the focused ultrasound stimulation system being developed by Icleo Co., Ltd., and the test was conducted through joint scenario development. . In the result of task performance, the performance rate was 90.67%, and after the completion of the performance, 86.67% of 'Easy user interface' and 94% of 'Identification/Readability/Understanding of information' questions in the participant survey results analysis by question. The response rate was above average.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.4
• /
• pp.379-390
• /
• 2022

While the construction industry is striving to make changes suitable for the 4th industrial revolution era through the introduction of 4th industrial revolution technologies, such change is progressing more slowly than in other industries. Nevertheless, the recent digitization and digital transformation of the construction industry can provide a new paradigm to address and innovate the chronic problems faced by the construction industry. Therefore, in this study, a case study using a data hub and API for use of the data hub, which is essential for digitalization and digital transformation, was conducted, and the efficiency and feasibility of using the data hub and API were considered. When the API system was introduced, it was found that the average budget savings per person was about 23%, and the costbenefit ratio was about 4.4 times higher, indicating that the feasibility of the project was very high. The results and framework of this study can serve as fundamental research data for related research, and provide a worthy case study to promote the introduction of related technologies. This will ultimately contribute to digitalization and digital transformation for smartization of the construction industry.

• International Journal of Computer Science & Network Security
• /
• v.23 no.4
• /
• pp.55-68
• /
• 2023

In recent years, the Television White Space (TVWS) has attracted the interest of many researchers due to its propagation characteristics obtainable between 470MHz and 790MHz spectrum bands. The plenty of unused channels in the TV spectrum allows the secondary users (SUs) to use the channels for broadband services especially in rural areas. However, when the number of SUs increases in the TVWS wireless network the aggregate interference also increases. Aggregate interferences are the combined harmful interferences that can include both co-channel and adjacent interferences. The aggregate interference on the side of Primary Users (PUs) has been extensively scrutinized. Therefore, resource allocation (power and spectrum) is crucial when designing the TVWS network to avoid interferences from Secondary Users (SUs) to PUs and among SUs themselves. This paper proposes a model to improve the resource allocation for reducing the aggregate interface among SUs for broadband services in rural areas. The proposed model uses joint power and spectrum hybrid Firefly algorithm (FA), Genetic algorithm (GA), and Particle Swarm Optimization algorithm (PSO) which is considered the Co-channel interference (CCI) and Adjacent Channel Interference (ACI). The algorithm is integrated with the admission control algorithm so that; there is a possibility to remove some of the SUs in the TVWS network whenever the SINR threshold for SUs and PU are not met. We considered the infeasible system whereby all SUs and PU may not be supported simultaneously. Therefore, we proposed a joint spectrum and power allocation with an admission control algorithm whose better complexity and performance than the ones which have been proposed in the existing algorithms in the literature. The performance of the proposed algorithm is compared using the metrics such as sum throughput, PU SINR, algorithm running time and SU SINR less than threshold and the results show that the PSOFAGA with ELGR admission control algorithm has best performance compared to GA, PSO, FA, and FAGAPSO algorithms.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5B
• /
• pp.575-589
• /
• 2008

In the present work, we investigate the hydrodynamic behavior of a turbulent bore, such as tsunami bore and tidal bore, generated by the removal of a gate with water impounded on one side. The bore generation system is similar to that used in a general dam-break problem. In order to the numerical simulation of the formation and propagation of a bore, we consider the incompressible flows of two immiscible fluids, liquid and gas, governed by the Navier-Stokes equations. The interface tracking between two fluids is achieved by the volume-of-fluid (VOF) technique and the M-type cubic interpolated propagation (MCIP) scheme is used to solve the Navier-Stokes equations. The MCIP method is a low diffusive and stable scheme and is generally extended the original one-dimensional CIP to higher dimensions, using a fractional step technique. Further, large eddy simulation (LES) closure scheme, a cost-effective approach to turbulence simulation, is used to predict the evolution of quantities associated with turbulence. In order to verify the applicability of the developed numerical model to the bore simulation, laboratory experiments are performed in a wave tank. Comparisons are made between the numerical results by the present model and the experimental data and good agreement is achieved.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.56.1-56.1
• /
• 2020

한국의 고문헌 중에는 다양한 고천문 기록들이 한문 형태로 존재하며, 이를 학술적으로 활용하기 위해서는 전문 번역가 투입에 따른 많은 비용과 시간이 요구된다. 이에 인공신경망 기계학습에 의한 인공지능 번역기를 개발하여 비록 초벌 번역 수준일지라도 문장 형태의 한문을 한글로 자동번역해 주는 학술 도구를 소개하고자 한다. 이 자동번역기는 한국천문연구원이 한국정보화진흥원이 주관하는 2019년도 Information and Communication Technology 기반 공공서비스 촉진사업에 한국고전번역원과 공동 참여하여 개발 완료한 것이다. 이 연구는 고천문 도메인에 특화된 인공지능 기계학습용 데이터인 천문 고전 코퍼스를 구축하여 이를 기반으로 천문 고전 특화 자동번역 모델을 개발하고 번역 서비스하는 것을 목적으로 한다. 이를 위해 구축되는 시스템은 크게 세 가지이다. 첫째, 로그인이 필요 없이 누구나 웹 접속을 통해 사용이 가능한 클라우드 기반의 고문헌 자동번역 대국민서비스 시스템이다. 둘째, 참여 기관별로 구축된 코퍼스와 도메인 특화된 번역 모델의 생성 및 관리할 수 있는 클라우드 기반의 대기관 서비스 플랫폼 구축이다. 셋째, 개발된 자동번역 Applied Programmable Interface를 활용한 한국천문연구원 내 자체 서비스가 가능한 AITHA 시스템이다. 연구 결과로서 먼저 구축된 천문 고전 코퍼스 60,760건에 대한 샘플링 검수 결과는 품질 순도 99.9% 이상이다. 아울러 도출된 천문 고전 특화 번역 모델 총 20개 중 대표 모델에 대한 성능 평가 결과는 기계 번역 텍스트 품질 평가 알고리즘인 Bilingual Evaluation Understudy 평가에서 40.02점이며, 전문가에 의한 휴먼 평가에서 5.0 만점 중 4.05점이다. 이는 당초 연구 목표로 삼았던 초벌 번역 수준에 충분하며, 현재 개발된 시스템들은 자체 시험 운영 중이다. 이 연구는 특수 고문헌에 해당되는 고천문 기록들의 번역 장벽을 낮춰 관련 연구자들의 학술적 접근 및 다양한 연구에 도움을 줄 수 있다는 점에서 의의가 있다. 또한 고천문 분야가 인공지능 자동번역 확산 플랫폼 시범의 첫 케이스로써 추후 타 학문 분야 참여 시 시너지 효과도 기대해 볼 수 있다. 고문헌 자동번역기는 점차 더 많은 학습 데이터와 학습량이 쌓일수록 더 좋은 학술 도구로 진화할 것이다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6D
• /
• pp.761-770
• /
• 2009

The energy efficiency and environment-friendly aspect of the railway system would be superior to other on-land ransportation systems. In a preliminary feasibility study stage and selection of optimal railway route, the energy efficiency and problems related to environment are usually considered. For the selection of optimal railway route, geographical features and facility of management are generally considered. Environment effect factors for the selection of environment-friendly railway router are focused and studied in this paper. In this study, various analysis of opinion of specialists (railway, environment, transport, urban planning, survey) and the guideline for construction of environment-friendly railway were accomplished. From these results of various analysis, 7 major categories (topography/geology, flora and fauna, Nature Property, air quality, water quality, noise/vibration, visual impact/cultural assets) were extracted. To select environment friendly railway route, many alternatives should be compared optimal route must be selected by a comprehensive assessment considering these 7 categories. To solve this problem, the selected method was AHP which simplifies the complex problems utilizing hierarchy, quantifying qualitative problems through 1:1 comparison, and extracting objective conclusions by maintaining consistency. As a result, a GUIbased program was developed which provides basic values of weighted parameters of each category defined by specialists, and a quantification of detailed assessment guidelines to ensures consistency.