• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.1
• /
• pp.47-57
• /
• 2010

An undisturbed healing process without micromotion at the implant-bone interface is essential for achievement of osseointegration of dental implant. Therefore, initial stability was advocated as prerequisite for successful clinical outcome. Adequate bone quality and quantity were important to achieve initial stability and to prevent early failures. However there were few published data available regarding the effect of design change in implant geometry on initial stability of the implants. The purpose of the current study was to assess the initial stability of various designs of implants when placed into artificial bone materials of varying qualities and shapes of insertion holes. Within the scope of this study, the following results were drawn. Bone quality was major importance to achieve initial stability. Initial stability was higher on GS II which had additional design feature of double thread. With a tapered design of implant such as GS III showed a higher initial stability than straight one. An insertion hole with the similar shape of implant would lead to reduce a compression force on cortical bone and enhance a bone anchorage on cancellous bone.

• The Journal of the Korea Contents Association
• /
• v.14 no.10
• /
• pp.64-72
• /
• 2014

As the importance of interface became emphasized recently, function of icon as an element that helps operation and formative function as an aesthetic element are becoming emphasized. Specially, various research methodologies for measuring the understanding degree of users are being attempted in functional aspect, however, they are facing limitations as user evaluation method of quantitative investigation for statistical analysis became overly dependent on the consent from majority. To overcome such limitation, a methodology of measuring sensibility as aesthetic impression or individuality based on the system of emotion or system of understanding of users and designing icon based on the measurement is being attempted continuously. Therefore, this study suggested an evaluation method using reminding words and conducted an empirical study to apply results on the icon design by applying the evaluation method on icon design of printing products to measure the user sensibility and understanding level. Through this process, this study intended to research summaries on the design evaluation method which based on the evaluation of user sensibility and understanding level and to debate effective design methodologies through the process of applying these summaries on the project. The intention was to progress discussion from practical application perspectives apart from the textbook type discussion by applying a research methodology through concrete cases. This study objectified sensibility and understanding level of users in the icon design aspect, suggested a methodology that can be applied on the design, and it is expected to be used when progressing the icon and GUI design.

• Composites Research
• /
• v.24 no.1
• /
• pp.24-30
• /
• 2011

Low-velocity impact can cause various damages which are mostly hidden inside the laminates or occur in the opposite side. Thus, these damages cannot be easily detected by visual inspection or conventional NDT systems. And if they occurred between the scheduled NDT periods, the possibilities of extensive damages or structural failure can be higher. Due to these reasons, the built-in NDT systems such as real-time impact monitoring system are required in the near future. In this paper, we studied the impact monitoring system consist of impact location detection and damage assessment techniques for composite flat and stiffened panel. In order to acquire the impact-induced acoustic signals, four multiplexed FBG sensors and high-speed FBG interrogator were used. And for development of the impact and damage occurrence detections, the neural networks and wavelet transforms were adopted. Finally, these algorithms were embodied using MATLAB and LabVIEW software for the user-friendly interface.

• Economic and Environmental Geology
• /
• v.53 no.1
• /
• pp.11-21
• /
• 2020

One-dimensional analytical solutions were used for forward and back diffusion of trichloroethylene (TCE) and tetrachloroethylene (PCE) in a single system with high- and low-permeability layers. Concentration profiles in a low-permeability layer, diffusive fluxes at the interface between the high- and low-permeability layers, and contaminant persistence in the high-permeability layer due to back diffusion were simulated with a comparison of semi-infinite and finite analytical solutions. In order to validate the analytical solutions used in this study, the results of one-dimensional analytical solutions developed by Yang et al. (2015) were compared with Nash-Sutcliffe model efficiency coefficient (NSE). When compared with Yang et al. (2015), the analytical solutions used in this study showed good agreements (NSE = 0.99). When compared with semi-infinite analytical solutions, TCE and PCE concentration profiles in the low-permeability layer, the diffusive fluxes, and the contaminant tailings of the high-permeability layer were underestimated. In order to determine the appropriate analytical solutions based on the effective diffusion coefficient, the thickness of the low-permeability layer, and the diffusion time in the TCE and PCE contaminated site, a term of dimensionless diffusion length (Z_d) was used. If the Z_d is less than 0.7, the semi-infinite solutions can be used to simulate accurate concentration profiles in low-permeability layers. If the Z_d is greater than 0.7, the reliability of simulations may be improved by using the finite solutions.

• The KIPS Transactions:PartD
• /
• v.9D no.6
• /
• pp.1145-1156
• /
• 2002

We propose a web document transcoding technique that translates existing web pages designed for desktop computers into an appropriate form for hand-held devices connected to the wireless internet. By defining a content block based on a visual separation and using it as a minimum unit for analyzing and converting processes, we can get web pages converted more exactly. We also apply the reallocation of the content block and the generation of new index in order to provide convenient interface without left-right scrolling in small screen devices. These methods, compared with existing ways such as text level summary or partial extraction method, can provide efficient navigation and a full recognition of web documents. To gain those transcoding benefits, we propose the Layout-Forming Tag Analysis Algorithm that analyzes structural tags, which motivate visual separation and the Component Grouping Algorithm that extracts the content block. We also classify and rearrange the content block and generate the new index to produce an appropriate form of web pages for small display devices. We have designed and implemented our transcoding system in a proxy server and evaluated the methods and the algorithms through an analysis of transcoded results. Our transcoding system showed a good result on most of popular web pages that have complicated structures.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.6
• /
• pp.809-815
• /
• 1996

$Y_2O_3$-based metal-insulator-semiconductor (MIS) structure on p-Si(100) has been studied. Films were prepared by UHV reactive ionized cluster beam deposition (r-ICBD) system. The base pressure of the system was about $1 \times 10^{-9}$ -9/ Torr and the process pressure $2 \times 10^{-5}$ Torr in oxygen ambience. Glancing X-ray diffraction(GXRD) and in-situ reflection high energy electron diffracton(RHEED) analyses were performed to investigate the crystallinity of the films. The results show phase change from amorphous state to crystalline one with increasingqr acceleration voltage and substrate temperature. It is also found that the phase transformation from $Y_2O_3$(111)//Si(100) to $Y_2O_3$(110)//Si(100) in growing directions takes place between $500^{\circ}C$ and $700^{\circ}C$. Especially as acceleration voltage is increased, preferentially oriented crystallinity was increased. Finally under the condition of above substrate temperature $700^{\circ}C$ and acceleration voltage 5kV, the $Y_2O_3$films are found to be grown epitaxially in direction of $Y_2O_3$(1l0)//Si(100) by observation of transmission electron microscope(TEM). Capacitance-voltage and current-voltage measurements were conducted to characterize Al/$Y_2O_3$/Si MIS structure with varying acceleration voltage and substrate temperature. Deposited $Y_2O_3$ films of thickness of nearly 300$\AA$ show that the breakdown field increases to 7~8MV /cm at the same conditon of epitaxial growing. These results also coincide with XPS spectra which indicate better stoichiometric characteristic in the condition of better crystalline one. After oxidation the breakdown field increases to 13MV /cm because the MIS structure contains interface silicon oxide of about 30$\AA$. In this case the dielectric constant of only $Y_2O_3$ layer is found to be $\in$15.6. These results have demonstrated the potential of using yttrium oxide for future VLSI/ULSI gate insulator applications.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.642-652
• /
• 2014

The synthesis of octenyl succinyl ${\beta}$-gucan (OSA-${\beta}$-glucan) was carried out and its interfacial properties at the oil-water interface and in emulsion systems were investigated. An aqueous ethanol system as a reaction media was used to facilitate the synthesis process; 10% (w/w) ethanol found to be the best as it showed a maximum degree of substitution (DS: 0.0132). FT-IR showed a characteristic absorption spectrum at $1736cm^{-1}$, indicating the esterification of octenyl succinyl groups to ${\beta}$-glucan backbone. As for interfacial tension measurements, it was decreased with increasing concentration of OSA-${\beta}$-glucan in the aqueous phase and when NaCl was added to aqueous OSA-${\beta}$-glucan solution in the range of 0.01 M to 0.1 M and also when pH was raised (pH 3 ~ pH 9). In systems of emulsion stabilized with OSA-${\beta}$-glucan, fat globule size found to decrease with increasing concentration of OSA-${\beta}$-glucan, showing a critical value of about $0.32{\mu}m$ at 0.5 wt%. When the OSA-${\beta}$-glucan emulsions were stored, it was found that fat globule size was increased with storage time and particularly pronounced increase was observed in emulsion with 1% OSA-${\beta}$-glucan, possibly due to depletion flocculation. Results of creaming stability evaluated by light scattering technique showed that it was more stable in emulsions containing smaller fat globule size. Surface load of OSA-${\beta}$-glucan in emulsions increased with increasing concentration of OSA-${\beta}$-glucan, suggesting a multilayer adsorption.

• The Korean Journal of Malacology
• /
• v.20 no.2
• /
• pp.165-169
• /
• 2004

The BLAST server for the mollusk was constructed on the basis of the Intel Server Platform SC-5250 dual Xeon 2.8 GHz cpu and Linux operating system. After establishing the operating system, we installed NCBI (National Center for Biotechnology Information) WebBLAST package after web server configuration for cgi (common gate interface) (http://chimp.kribb.re.kr/mollusks). To build up the stand alone blast, we conducted as follows: First, we downloaded the genome information (mitochondria genome information), DNA sequences, amino acid sequences related with mollusk available at NCBI. Second, it was translated into the multifasta format that was stored as database by using the formatdb program provided by NCBI. Finally, the cgi was used for the Stand Alone Blast server. In addition, we have added the vector, Escherichia coli, and repeat sequences into the server to confirm a potential contamination. Finally, primer3 program is also installed for the users to design the primer. The stand alone BLAST gave us several advantages: (1) we can get only the data that agree with the nucleotide sequence directly related with the mollusks when we are searching BLAST; (2) it will be very convenient to confirm contamination when we made the cDNA or genomic library from mollusks; (3) Compared to the current NSBI, we can quickly get the BLAST results on the mollusks sequence information.

• Archives of design research
• /
• v.14 no.1
• /
• pp.35-46
• /
• 2001

Recently varieties of user groups are formed as the number of people using cyber chatting gets increased and there are many changes in the range and field of its use. But because most of the cyber chatting systems are being operated to enlarge the additional sonics use, the using environments are stereotyped. And as its function is being various as well, it can not provide with a user-centered environment. So this thesis compares and analyzes the problems derived from the usability evaluation for solving the problems in using cyber chatting systems, and presents the guidelines of emotion-intended user interface design for improving the usability as the result of the analysis. First, this study investigates cyber chatting systems as a means of web communication tools through the existing literatures. Secondly, this study finds out the problems in using them through satisfaction evaluation, heuristic evaluation, performance evaluation, and observation evaluation and presents a way of solving the provisional problems in using them as the analysis of the result of usability evaluation. And this was proceeded for the purpose of applying and activating the better usability evaluation of cyber chatting systems later. Through the usability evaluation, it is found out that the structuralization of chatting function, the screen visibility by the size and arrangement of the compositional elements of a screen, and the improvement and development of the proper metaphor use of images and functions by the communication environment are necessary.

• International Journal of Highway Engineering
• /
• v.5 no.2 s.16
• /
• pp.15-24
• /
• 2003

The performance of waterproofing system (WPS) is known to be a function of many complex interaction of material factors, design details, and the quality of construction, but it is mainly determined by the bond strength, which is measured by tensile adhesive strength (TAS) test. to the concrete bridge deck. In this research, eight waterproofing membranes were selected from commercial market and the tensile adhesive characteristics of the WPS on concrete bridge deck were investigated in view of various factor in asphalt pavement. The factors include type of asphalt mixture, pavement thickness, paving temperature and influence of wheel loading. TAS test of different asphalt pavement types showed that TAS of WPS under SMA (Stone Mastic Asphalt) pavement was greater than that under dense asphalt pavement. TAS of sheet membranes was improved as the compaction temperature of asphalt concrete increase, but TAS of liquid membranes were not. The influence of thickness of pavement val minimal with given laboratory test condition. TAS of sheet membranes after wheel tracking test were in the order of the sites under wheel path (UWP), before wheel tracking (BWT) and nearby wheel path (NWP). Since TAS of the same WPS of UWP was higher than TAS of BWT, wheel loading had function of pressing WPS resulting in higher adhesive strength. But liquid membranes were variable on types. The feature of detached interface after TAS test showed that sheet types were all detached in between deck concrete and WPS, and liquid types were detached in between asphalt pavement and WPS.