• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.713-716
• /
• 2003

In recent, the contactless IC card is widely used in traffic, access control system and so forth. Contactless smart cards use a technology that enables card readers to provide power for transactions and communications without making physical contact with the cards. Usually electromagnetic signal is used for communication between the card and the reader. Contactless card is highly suitable for large quantity of card access and data transaction. And its use becomes a general tendency more and more because of the development of RF technology and improvement of requirement for user convenience. This paper describes the hardware module to process contactless protocol for implementation contactless IC card. And the hardware module consists of specific digital logic circuits that analyze digital signal from analog circuit and then generate data & status signal for CPU, and that convert the data from CPU into digital signal for analog circuit.

• Journal of Contemporary Eastern Asia
• /
• v.22 no.1
• /
• pp.1-25
• /
• 2023

The aim of this study is to answer the straightforward question of whether the implementation of IC has fueled non-interest incomes of banks or not. By utilizing the data of 26 domestic banks in Vietnam and employing the value-added intellectual coefficient model (VAIC) as the measure of IC efficiency, our empirical evidence manifests that IC plays a vital role in fostering non-interest incomes of banks. When dividing VAIC into different components, we find that structure capital employed (SCE) is the most important component to enhance the expansion of these incomes compared with other components including capital employed efficiency (CEE), human capital efficiency (HCE). These findings remain unchanged through some robustness tests performed. While the main driver of IC and SCE, CEE component becomes a substantial advantage to increase non-interest incomes in large banks. Meanwhile, the degree of impact of SCE is higher in small banks compared with large ones. Overall, this study would provide a deep insight into the role of IC in the transformation into non-interest income activities of banks in an emerging country, and therefore our findings would be useful for both scholars and policy-makers in Vietnam, where has undergone the period of major reforms in banking system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.107.3-107
• /
• 2001

This paper is concerned with the development of a simple digital stethoscope system for diagnosis of cardiac disorders. This system consists of an electronic stethoscope, IC sound recorder and a notebook computer. The cardiac sound is easily acquired by the electronic stethoscope and then recorded in IC memory stick so that the digital cardiac signal can be simply transmitted to the computer for signal display, disease diagnosis, and personal history record. A software is built with functions displaying the sound graphically and replaying the sound clearly. Further, a neural network recognition system for automatic diagnosis of cardiac disorders is also added to the software.

• The KIPS Transactions:PartC
• /
• v.10C no.3
• /
• pp.281-286
• /
• 2003

Nowadays, a patient's private medical data which is exposed to the outside world has a severe effect on not only the patient's private life but also his/her social activities and environment. So, it is important to securely protect the patient's private medical data from the illegal manipulation. This paper studies the method to store the electronic prescription information in an IC card. For that, an access control for users, such as a doctor, a nurse, a medical institute member, a pharmacy, a pharmacist, or a patient, is proposed to access the data stored in an IC card. The certificate is issued using the Crypto API of a certificate management model supported by Windows 2000. The public/private key is created by the Cryptographic Service Provider program, and the electronic prescription is signed using the digital signature. The proposed system, therefore, can improve the quality of medical services by securing the safety and integrity of the electronic prescription, stored in an IC card.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.471-474
• /
• 1990

In this paper, a vision-based inspection algorithm for checking mark quality on an integrated chip(IC) is proposed. In order to reduce the processing time for inspection, we are implemented image arithmetic unit and binary image projection processor in hardware. By adopting the hardwares, the processing time becomes less one sixth of that in case of using software only.

• Laser Solutions
• /
• v.15 no.4
• /
• pp.16-19
• /
• 2012

Due to the fact that the dimensions of circuit lines of IC substrates have been forecast to reduce rapidly, engraving the circuit line patterns with laser has emerged as a promising alternative. To engrave circuit line patterns in an IC substrate, we used a projection ablation technique in which a metal (INVAR) mask and a DPSS UV laser instead of an excimer laser are used. Results showed that the circuit line patterns engraved in the IC substrate have a width of about 15um and a depth of $13{\mu}m$. This indicates that the projection ablation with a metal mask and a DPSS UV laser could feasibly replace the semi-additive process (SAP).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2A
• /
• pp.109-115
• /
• 2002

We propose IC-IPDL method, in order to improve hearability which is the fundamental problem of cellular-based location systems. The proposed method improves hearability by using interference cancellation technique for CPICH and modified-IPDL method for other downlink channels. The simulation results showed that IC-IPDL method has a similar performance of the case using standard IPDL method though CPICH exists during idle period.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.9-14
• /
• 2007

In this paper, four types of igniters were modeled and their characteristics were researched. And then we analyzed and experimented the effect on the control IC operation in this system. Due to the high ignition voltage, the DC power line on control IC is contaminated with the impulsive noise voltage. So the control IC operation is stopped. Therefore we have found that contamination of DC power noise is reduced by shielding, grounding pattern, and filtering method. We showed that the experimental results are agreed with the theoritical value obtained by the four types of ignitor models.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.2
• /
• pp.23-29
• /
• 2002

In this paper we proposed the user identification system using hybrid biometric information and non-contact IC card to improve the accuracy of the system. The hybrid biometric information consists of the face image, the iris image, and the 4-digit voice password of user. And the non-contact IC card provides the base information of user If the distance between the sample hybrid biometric Information corresponding to the base information of user and the measured biometric information is less than the given threshold value, the identification is accepted. Otherwise it is rejected. Through the result of experimentation, this paper shows that the proposed method has better identification rate than the conventional identification method.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.4 no.4
• /
• pp.269-274
• /
• 2004

Current delivery system, in which the analog current produced by a unique DAC circuit is stored into a current-memory circuit and delivered in a time-divided sequence, shows variation of output current as low as 4% in a current source data-driver IC for AM-OLED driven by a current-programmed method without any fuse repairing after fabrication. This driver IC has 54 outputs and can sink constant current as low as 3 ${\mu}A$ with 6-bit analog levels. Such a low current level without variation can hardly be obtained by an ordinary MOS transistor because the current level is in the sub-threshold region and changes exponentially with threshold voltage variation. Thus we adopted a current mirror circuit composed of bipolar transistors to supply well-controlled current within a nano-ampere range.