• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.4
• /
• pp.224-230
• /
• 2006

The conventional way to implement a bidirectional converter with boost/buck has been to use two general purpose PWM ICs with a single supply voltage. In this case, when one direction mode is in operation, the other is disabled and the output of the error amplifier of the disabled IC may be saturated to a maximum value or zero. Therefore, during mode transition, a circuit which can disable the switching operation for a certain time interval is required making it impossible to get a seamless transition. In this paper, the limitations of the conventional 42V/14V bi-directional DC/DC converter implemented with general current mode PWM ICs with a single supply voltage are reviewed and a new current mode PWM controller circuit with a dual voltage system is proposed. The validity of the proposed circuit is investigated through simulation. and experiments.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.99-107
• /
• 1989

This paper describes the KUI-LED (Kyungpook national University Intelligent CAD-Layout EDitor) which is a 2-dimensional graphics editor for IC mask layout. This system runs of IBM PC/AT with the ${\Omega}$/PC graphics board. It offers a sufficient set of facilities to do most kinds of layout. KUIC-LED is written in 'C' and 'Assembly' language.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.12
• /
• pp.31-37
• /
• 1994

Aluminum films were deposited by the pyrolysis of triisobutylaluminum(TIBA) in a cold wall LPCVD system for the metallization of high level IC. the selectivity on Si/SiO2 substrate and the contact resistance on submicron contacts were investigated. The carbon free aluminum film could be obtained when the aluminum film was deposited at low substrate temperature. Contact resistances of CVD Al/n+ Si contacts whose contact size was 0.5 .mu.m werre as low as 20~40.OMEGA./ea, which is 30~50% of contact resistance obtained by sputtering technique.

• Electronics and Telecommunications Trends
• /
• v.17 no.5 s.77
• /
• pp.102-106
• /
• 2002

현재 IC 카드는 통신, 금융, 교통 등의 여러 응용 서비스에서 널리 사용되고 있는데, 계속적인 하드웨어 기술의 발전으로 인한 메모리 증가, CPU 성능 향상과 통합된 정보 가전을 위한 다양한 형태의 네트워크 연결 인터페이스 구축 노력이 다중 응용 프로그램 사용 요구 및 개방형 운영체제(open-platform operating system)와 맞물려 도약적인 기술 발전을 이루고 있다. 본 고에서는 널리 사용되고 있으며 향후 시장성이 가장 클 것으로 예측되는 자바 카드 플랫폼 탑재 IC 카드의 기술 현황을 H/W 및 S/W 측면에서 살펴보고, 자바 카드 기술의 발전 동향을 조망하고자 한다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.273-275
• /
• 2002

In this studies, curing behavior and mechanical properties of tetrafunctional epoxy resin (4EP)/ fluorine-containing epoxy resin (FEP) blend systems was investigated with 4, 4'-diaminodiphenol methane (DDM) as a curing agent. The cure activation energies $(E_a)$) were studied by Flynn-Wall-Ozawa's equation with dynamic DSC method. For the fracture toughness of the casting specimens, the critical stress intensity factor ($K_{IC}$) and the specific fracture energy ($G_{IC}$) were determined by fracture toughness test.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.37-40
• /
• 2001

The semiconductor's design rule becomes more stringent, hence the silicon-dioxide etching technique is important issue. In this work we compared the etching characteristics of different three types of Plasma source, Normal ICP, magnetized ICP and E-IC $P^{TM}$. The E-IC $P^{TM}$ source shows higher etch rate at lower pressure and this is advantageous for the fine pattern process. The etching characteristics were varied with external magnetic field frequency at I-lCP and this is examined with Nanospe $c^{TM}$ and SEM. We designed Langmuir probe system for time resolved diagnosis. ion density of E-ICP is varying periodically with the applied external magnetic field frequencyquency

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.1
• /
• pp.34-41
• /
• 1998

In this paper, I designed a P1394 serial bus chip as new bus interface architecture which can transmit the multimedia data at the rate of 400 Mbps and guarantee necessary bandwidth. because multimedia data become meaningless data after appropriate time, it is necessary to transfer multimedia data in real time, P1394 serial bus chip designed in this paper support isochronous transfer mode to solve this problem. Also, designed P1394 serial bus chip can transfer high quality video data or high quality audio data because it support the speed of 400 Mbps. While user must set device ID manually in previous interface such as SCSI, device ID is automatically determined if user connect each node with designed P1394 serial bus cable and power on. To design this chip, I verified the behavioral of the entrire system and synthesized layout. Also, I did layout the analog blocks and blocks which must be optimized in full custom.

• The Plant Pathology Journal
• /
• v.22 no.2
• /
• pp.164-167
• /
• 2006

An immunocapture reverse transcription-polymerase chain reaction (IC/RT-PCR) was developed for simultaneous detection of two pepper-infecting RNA viruses, Pepper mud mottle virus (PMMoV) and Tobacco mild green mosaic virus (TMGMV). The assay could be performed in a single tube for simultaneous and sensitive detection of these tobamoviruses. This detection system revealed thousand-fold increase in detection sensitivity compare to ELISA. This method could save time and reagent cost compare to common RT-PCR which needs several reactions and several procedures of viral RNA extractions for the same number of samples.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.2
• /
• pp.163-168
• /
• 1989

In this paper, Rayleigh wave velocity has been measured by detecting the backscattered signal generating near the Rayleigh critical angle in the elastic medium. The rotating system has been made for the measurment of Rayleigh angle. It has been shown that the measured velocity for the stainless steel, brass aluminum, copper has been good agreement with the theoretical value. The method of non-destructive evaluation using backscattering signal has been presented and the c-scan acoustic image for internal of IC sample has been displayed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.27-28
• /
• 2009

This paper suggests a autonomous linear Li-ion battery charger which can safely distribute power between an external power source(AC adapter, auto adapter, or USB source), battery, and the system load. Depending on an external power source's capability, the charger selects proper charging-mode automatically. The charger IC designed and fabricated on Dongbu HITEC's $0.35{\mu}m$ BCD process with layers of one poly and three metals.