• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.1
• /
• pp.25-31
• /
• 2004

This paper is research about the improvement of recognition rate of the biometrics user identification system using the data previously stored in the non contact Ic smart card. The proposed system identifies the user by analyzing the iris pattern his or her us. First, after extracting the area of the iris from the image of the iris of an eye which is taken by CCD camera, and then we save PCA Coefficient using GHA(Generalized Hebbian Algorithm) into the Smart Card. When we confirmed the users, we compared the imformation of the biometrics of users with that of smart card. In case two kinds of information was the same, we classified the data by using SVM(Support Vector Machine). The Experimental result showed that this system outperformed the previous developed system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.419-424
• /
• 2011

The system-on-board detectable and controllable the electrical fires due to ground fault(GF), arc fault and overload is implemented. The system IC for controlling and preventing the electrical fires is available to this system. The GF detection circuit for detecting the electrical leakage current, the arc fault detection circuit and the overload detection circuit controllable the input voltage for flowing the overload current are designed. The GF detection circuit and the arc fault detection circuit are good operated to the electrical leakage current and the arc signal, respectively. It is confirmed that the overload detection circuit has shown no erratic operation with the noise or the load variation and is only operated at the overload condition.

• Composites Research
• /
• v.17 no.1
• /
• pp.10-17
• /
• 2004

In this work, the blend system prepared from epoky(DGEBA)/polymethylmethacrylate(PMMA) was investigated in thermal and mechanical interfacial property measurements. The thermal properties were carried out by DSC, DMA, and TGA measurements. Also, the surface free energy and fracture toughness were determined by contact angle and critical stress intensity factor($K_{IC}$), respectively. And the fracture surface was observed by SEM after $K_{IC}$ tests. As experimental results, the curing temperature and glass transition temperature were slightly increased in addition of PMMA. Surface free energy of the blends showed an improved value at low contents of PMMA which could be attributed to the both increasings of London dispersive and polar components. From measurement of $K_{IC}$ of the blends, the highest value was found at 5 phr. This was due to the increasing of compatibility or physical interaction in macromolecular chains between DGEBA and PMMA of the blends.

• Journal of IKEEE
• /
• v.14 no.3
• /
• pp.190-198
• /
• 2010

This paper describes a auto focus piezo actuator driver IC for portable digital camera. The 80[V] DC voltage is generated by a DC-DC converter and supplied to power of piezo moving control circuit. The voltage of piezo actuator needs range -20[V] to 80[V] proportional to 1[Vp-p] input control voltages. The dimensions and number of external parts are minimized in order to get a smaller hardware size. IIC(Inter-IC) interface logic is designed for data interface and it makes debugging easy, test for mass productions. The power consumption is around 40[mW] with supply voltage of 3.6[V]. This device has been fabricated in a 0.6[um] double poly, triple metal 100[V] BCD MOS process and whole chip size is 1600*1500 [$um^2$].

• Advances in Traditional Medicine
• /
• v.7 no.5
• /
• pp.477-484
• /
• 2008

The present study was aimed at investigating the hypouricemic and xanthine oxidase inhibitory activities of the various fractions of the hydromethanolic extract of the leaves of Coccinia grandis L. Voigt (Cucurbitaceae). The leaves of this species was used in traditional medicinal system for the treatment of gout, rheumatism, jaundice, bronchitis, fever, skin eruptions, wounds, etc. The degree of xanthine oxidase inhibition was determined in vitro by measuring the increase in absorbance at 295 nm associated with uric acid formation. Among the fractions tested, the chloroform fraction exhibited highest potency ($IC_{50}$ $17.8\;{\mu}g/ml$). This was followed by the pet-ether ($IC_{50}$ $29.7\;{\mu}g/ml$), ethyl acetate ($IC_{50}$ $41.2\;{\mu}g/ml$) and residual ($IC_{50}$ $47\;{\mu}g/ml$) fractions. The $IC_{50}$ value of allopurinol was $6.1\;{\mu}g/ml$. In addition, the hypouricemic and hepatic xanthine oxidase (XO)/xanthine dehydrogenase (XDH) inhibitory activities of the fractions were examined in vivo using oxonate (280 mg/kg, i.p.) induced hyperuricemic mice. At a dose of 200 mg/kg orally for 7 days, the pet-ether, chloroform and ethyl acetate fractions produced a significant (P < 0.01) reduction in serum urate level and also inhibited hepatic XO/XDH activities when compared to hyperuricemic mice. These inhibitory effects were weaker than that observed for the standard drug, allopurinol (10 mg/kg, p.o.). Lineweaver-Burk analysis of the enzyme kinetics indicated that the mode of inhibition was of a mixed type. These results suggest that the use of Coccinia grandis leaves for the treatment of gout could be attributed to its XO inhibitory activity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7B
• /
• pp.686-694
• /
• 2002

In this paper, we introduce an improved sorting method of the IGIC(Improved initial stage Grouping Interference Canceller) system for advanced BER(Bit Error Rate) performance in DS-CDMA. Among non liner Interference Cancellers, the PIC(Parallel IC) with advanced initial stage by sorting method has the name of the IGIC(Improved initial stage Grouping Interference Canceller) system. In this system, All group are shared with the same number of users. But, if each group are divided the same users, so that difference of the signals strength appeared greatly in the same group. Up to this time, the weak signals have more effect of the MAI (Multiple Access Interference) from the strong signals in the same group. The proposed IC (Interference Canceller) to solve those problems has a better performance by using improved sorting method from IGIC system. A new sorting method is the technique that the strength of signals would be liked in the same group. So, the MAI is reduced as difference of signal strength minimize. Analysis of performance assayed to make comparison with other non liner interference canceller when power controlled and not one.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.9
• /
• pp.14-23
• /
• 2010

This paper reports the fabrication of a DVB-T/H System in Package (SiP) that is able to receive and process the DVB-T/H signal. The DVB-T/H is the European telecommunication standard for Digital Video Broadcasting (DVB). An IC-embedded Printed Circuit Board (PCB) process, interpose a chip between PCB layers, has applied to the DVB-T/H SiP. The chip inserted in DVB-T/H SiP is the System on Chip (SoC) for mobile TV. It is comprised of a RF block for DVB-T/H RF signal and a digital block to convert received signal to digital signal for an application processor. To operate the DVB-T/H IC, a 3MHz DC-DC converter and LDO are on the DVB-T/H SiP. And a 38.4MHz crystal is used as a clock source. The fabricated DVB-T/H SiP form 4 layers which size is $8mm{\times}8mm$. The DVB-T/H IC is located between 2nd and 3rd layer. According to the result of simulation, the RF signal sensitivity is improved since the layout modification of the ground plane and via. And we confirmed the adjustment of LC value on power transmission is necessary to turn down the noise level in a SiP. Although the size of a DVB-T/H SiP is decreased over 70% than reference module, the power consumption and efficiency is on a par with reference module. The average power consumption is 297mW and the efficiency is 87%. But, the RF signal sensitivity is declined by average 3.8dB. This is caused by the decrease of the RF signal sensitivity which is 2.8dB, because of the noise from the DC-DC converter.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.537-540
• /
• 2004

In this paper, CMOS A/D converter with 6bit 2GSPS Nyquist input at 1.8V is designed. In order to obtain the resolution of 6bit and the character of high-speed operation. we present an Interpolation type architecture. In order to overcome the problems of high speed operation further a novel encoder, a circuit for the Reference Fluctuation, an Averaging Resistor and a Track & Hold for the improved SNR are proposed. The proposed Interpolation ADC consists of Track & Holt four resistive ladders with 64 taps, 32 comparators and digital blocks. The proposed ADC is based on 0.18um 1-poly 3-metal N-well CMOS technology, and it consumes 145mW at 1.8V power supply.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.909-912
• /
• 2005

According to miniaturization trend of rehabilitation medical equipment such as hearing aid, study to replace previous complex system with semiconductor SOC (System-on-Chip) chip becomes lively. In this study, after investigating of existent hearing aid performance in circuit design approach, low electric power consuming, single power supply (1.4V battery) CMOSS OP AMP was designed. Analog circuit design tools such as Hspice and Cadence were used for circuit simulation and implementing layout design. This study shows technical methods particularly for layout design. The work is done in pmos and nmos active element layout design in addition to passive element design such as resister, capacitor and inductor.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.8
• /
• pp.56-64
• /
• 2012

This paper proposes a novel maximum power point tracking (MPPT) control algorithm considering radiation to improve efficiency of PV system. The proposed algorithm is composed perturb and observe (PO) method and constant voltage (CV) method. PO method is simple to realize and CV method is possible to tracking MPP with low radiation. Response characteristics of proposed algorithm are compared to conventional MPPT algorithm such as PO method, IC method and CV method with radiation variation. This paper proves the validity of proposed algorithm through the analysis results.