• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.1
• /
• pp.17-32
• /
• 1995

The objective of this study is to develop a general design and performance evaluation model for the system designers in the initial design phase of the integrated automatic manufacturing system based on the RAM(Reliability, Availability and Maintainability) and life cycle cost(LCC). The methodology proposed in this research includes the following two stages. First, a deterministic approach to the solution of optimal work station arrangement for the initial system configuration is considered under the assumption that the system availability is one(no failure and maintenance), and then a stochastic simulation model based on RAM and LCC is developed. Using the results of these two stage simulation, a system performance index(SPI) was developed for the performance evaluation of the proposed system. Also a computer program is developed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.3 s.246
• /
• pp.219-230
• /
• 2006

Digital CAD models are one of the most important assets the manufacturer holds. The trend toward concurrent engineering and outsourcing in the distributed development and manufacturing environment has elevated the importance of high quality CAD model and its efficient exchange. But designers have spent a great deal of their time repairing CAD model errors. Most of those poor quality models may be due to designer errors caused by poor or incorrect CAD data generation practices. In this paper, we propose a rule-based approach for healing CAD model errors. The proposed approach focuses on the design history data representation from a commercial CAD model, and the procedural method for building knowledge base to heal CAD model. Through the use of rule-based approach, a CAD model healing system can be implemented, and experiments are carried out on automobile part models.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.5
• /
• pp.414-420
• /
• 2010

This paper presents a validation of the accuracy of a reduced order model(ROM) and the efficiency of the design optimization using a Proper Orthogonal Decomposition(POD) to transonic wing/fuselage system. Three dimensional Euler equations are solved to extrude snapshot data of the full order aerodynamic analysis, and then a set of POD basis vectors reproducing the behavior of flow around the wing/fuselage system is calculated from these snapshots. In this study, reduced order model constructed through this procedure is applied to several validation cases, and then it is confirmed that the ROM has the capability of the prediction of flow field in the space of interest. Additionally, after the design optimization of the wing/fuselage system with the ROM is performed, results of the ROM are compared with results of the design optimization using response surface model(RSM). From these, it can be confirmed that the design optimization with the ROM is more efficient than RSM.

• Journal of the Korean Society of Industry Convergence
• /
• v.11 no.2
• /
• pp.71-82
• /
• 2008

In this study, 3 dimensional non-linear race car vehicle model including Chassis, steering and suspension systems were modeled by using Multi-Body Dynamics Simulation Program, DADS 9.5(Dynamic Analysis and Design System),which was used in kinematic and dynamic analysis. A full race car vehicle dynamics model using DADS program was presented and analysis was carried out to estimate the handling characteristics that may be very useful to design a race car in early design stage. The simulation of vehicle handling behavior for step steering input was simulated and compared with different design parameters: torsional stiffness of the front and rear anti roll bars, the motion ratio of the front and rear suspension system, the location of the tie rod joint, in multibody dynamic model. Therefore this simulation model before race car construction in early design step will be helpful for race car designer to save time and limited budget.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.5
• /
• pp.913-921
• /
• 2009

This paper suggests a deign method of the model-following $H{\infty}$ control system having robust performance. This $H{\infty}$ control system is designed by applying genetic algorithm(GA) with reference model to the optimal determination of weighting functions and design parameter ${\gamma}$ that are given by $H{\infty}$ control theory. These weighting functions and design parameter ${\gamma}$ are optimized simultaneously in the search domain guaranteeing the robust performance of closed-loop system. The effectiveness of this $H_{\infty}$ control system is verified by computer simulation.

• Journal of the Korean Institute of Rural Architecture
• /
• v.9 no.3
• /
• pp.33-45
• /
• 2007

Recently, large scale disasters have been occurred in rural areas. Most people suffering from the disaster live in the temporary containers. These could not provide the fundamental occupancy performances such as thermal insulation, ventilation and heating system. It is very important to rebuild the residence for sufferers quickly and safely. Because modular building system has some advantages such as short construction time, mobility, light-weight structure, modularity, flexibility and economical efficiency, it is expected that it could be easily applied to the disaster restoration. So, this research aims at developing the design model of modular building system for disaster restorations in fishing and agrarian villages. For this purpose, current counterplan for restoration was firstly investigated. Also the basic guideline was established through the investigation of current status of residence in fishing and agrarian villages. Finally, 2 types of design model such as single story residence and temporary accommodation facility were proposed. We could see that we could make the flexible building plan when applying the modular building system to the temporary housing for the sufferers.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.2162-2169
• /
• 2015

Cruise control is a technology for automatically maintaining a steady speed of vehicle as set by the driver via controlling throttle valve and brake of vehicle. In this paper we investigate cruise controller design method with consideration for distance to vehicle ahead. We employ linear time varying (LTV) model to describe longitudinal vehicle dynamic motion. With this LTV system we approximately model the nonlinear dynamics of vehicle speed by frequent update of the system parameters. In addition we reformulate the LTV system by transforming distance to leading vehicle into variation of system parameters of the model. Note that in conventional control problem formulation this distance is considered as disturbance which should be rejected. Consequently a controller can be designed by pole placement at each instance of parameter update, based on the linear model with the present system parameters. The validity of this design method is examined by simulation study.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.1
• /
• pp.29-35
• /
• 2011

In this paper, an integrated simulation model for designing multi-agent system based DEMS (distributed energy management system) in stand-alone micro-grid system is proposed. In the design of the EMS(energy management system), the multi-agent based DEMS are more effective than conventional centralized EMS, but it is difficult to design the DEMS by general design tools for power system because of various states of a microgrid system during operation of stand-alone mode. Also, since performance test of the DEMS using a real system is inefficient, an integrated simulation model is required for designing an effective multi-agent system based DEMS. The proposed model consists of Matlab/SimPowerSystems based simulation model of the microgrid system and the Multi-agnet based DEMS designed by Matlab/StateFlow tool. In order to show the effect of the proposed model, the model outputs are analyzed for specified operation conditions.

• IE interfaces
• /
• v.20 no.4
• /
• pp.547-559
• /
• 2007

In this paper, we design Real-Time Postal Logistics Operational Model and System as a to-be system. Current postal logistics information system, named PostNet, is a basic infra system designed for an end-to-end IT-driven process, from mail acceptance to delivery, linked with internal and external systems. Recent competing circumstances drive demand for more intelligent information system. So we design real-time postal logistics operational system focused on site operations. we analyze postal logistics operation and interview field workers and establish real-time postal logistics operational model to solve operational issues. Finally we suggest system specifications.

• The Journal of Society for e-Business Studies
• /
• v.1 no.2
• /
• pp.49-76
• /
• 1996

An industrial process is a sequence of steps intended to perform a useful task in an industrial organization, and can be described using a model or a representation framework such as function model, information model, process flow model, etc. Many researchers, however, claim that, all those models from different perspectives are required to describe complex systems such as CIMS. Thus these perspectives should be put together to build an optimal system. And the need for interconnection or transformation among different view points has arisen for effective communications between system developers and easy propogation of local changes in a model. But it seems to be difficult to integrate such models into a unified framework as they describe different aspects of the system on different purposes. This study is an attempt to interconnect these different perspectives, and thereby to support conceptual design of systems in a more effective manner. A methodology to transform the IDEFO functional model into a process flow model is proposed. The validity of the proposed approach is tested by developing a prototye of a computer-assisted design system on the operation processes of FMS installed at Seoul National University - Automation and Systems Research Institute.